x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us
Electronics & Wiring

Electronics & Wiring

Electronics & Wiring

Electronics & Wiring

If you're looking to add electronic devices to enhance the safety and comfort of your motorcycle, you're in the right place.  Browse from a large selection of wiring, fuse blocks, device mounts and cradles made for your motorbike that will get the job done. We carry the best, most innovative and high quality motorcycle electronic and wiring products from tried, tested and true brands like 3BR Power Sports, AdMore Lighting, Battery Tender, Denali, DrySpec, Garmin, GoPro, Interphone, RAM Mounts, Sena, SW-MOTECH and many more. Shop with us to stay powered up and connected with wiring and electrical components made for motorcyclists and their motorcycles.

 

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 82 total

Page:
  1. 1
  2. 2
  3. 3
  1. Twisted Throttle "L" Bracket, 2.5 inch, black

    DENALI L Bracket Accessory Mount, 2.5 inch | Black

    The DENALI L bracket accessory mount 2.5" black is great for mounting various accessories to your motorcycle. High strength stamped steel is 1" wide, 3mm in thickness and two and a half inches in length. This useful bracket is powder coated in an attractive semi matte black finish to increase durability and corrosion resistance. Great for use when fitting horns, lights, device mounts and anything else you need to fabricate. Keep a few of these handy DENALI L brackets in your toolbox to enhance your next installation! 

    Learn More
    $9.99

  2. Single Switch Mount

    DENALI Flat Switch Mount Plate For Horizontal Perch Bolts | Single or Double Switch Plates

    Mount single or double switches to motorcycles with horizontal perch bolt mounts with the Denali Flat Switch Mount For Horizontal Perch Bolts Learn More
    $11.99

  3. RAM-B-349U RAM BASE W/ M10 X 1.25 PITCH & 1" BALL

    RAM Mounts B-349U Base with M10 x 1.25 Pitch Threaded Post

    Not using the threaded hole for your bike mirror? RAM has the perfect 1" gadget mount. The RAM-B-349U threaded ball base fits many motorcycles including the Victory Vision. Place a RAM rubber ball on your motorcycle to quickly and easily mount a GPS, Cell Phone, MP3, Cup Holder or most any small electronic device. Learn More
    $9.49 $7.49

  4. RAM-B-238 Diamond Base Plate with 1"-diameter ball mount.  The RAM-B-238 is required for attachment of all RAM GPS holders (sold separately) to any RAM mount system.

    RAM Mounts B-238U Diamond Plate Cradle Adapter

    Required for all RAM device cradles when used with a RAM arm. Not required for connecting RAM device cradles to SW-MOTECH, Techmount, or Adaptive device mounts. Learn More
    $7.49 $6.99

  5. Techmount Flat Mount Light Switch Mount for PIAA and Denali light switches for Harley-Davidson models

    Techmount Flat Mount Light Switch Mount for PIAA and Denali light switches for Harley-Davidson models

    This accessory bracket provides a convenient mounting point for the on/off switch included with PIAA and Denali auxiliary lighting kits. Fits most Harley-Davidson motorcycles with horizontal switch mount bolts. Learn More
    $9.95

  6. Assorted Mini ATM Fuses for the PowerHub2 Power Distribution Module

    Assorted Mini ATM Fuses for the PowerHub2 Power Distribution Module

    Package contains four 2amp, four 3amp, two 5amp, two 7.5amp, two 10amp and one 15 amp fuses for use in the PowerHub2 Power Distribution Module by Denali. Fuses will work in other products that use mini ATM fuses.

    Learn More
    $8.99

  7. Battery Tender Ring Terminals-to-SAE Harness

    Battery Tender Ring Terminals-to-SAE Harness

    Attach rings directly to battery terminals. Length is 18” and includes fuse holder with 3 amp fuse with weatherproof cap. SAE connector plugs into Battery Tender charger, other chargers, and many electrical accessories.

    Learn More
    $6.95

  8. SW-MOTECH GPS adapter kit for the Garmin Zumo 660 and 665 cradle

    SW-MOTECH GPS adapter kit for the Garmin Zumo 660 and 665 cradle

    Adapter kit used to attach the motorcycle device cradle that comes with the purchase of a Garmin Zumo 660 or Zumo 665 to any SW-MOTECH Vibration-Damped GPS Holder. Learn More
    $9.95

  9. RAM-B-202 round base with 1"-diameter ball mount.

    RAM Mounts B-202 Round Plate with AMPS Hole Pattern

    Includes RAM-B-202 base with 2.5" diameter platform. Compatible with all 1" RAM receptacles. Requires RAP-300-1U. Learn More
    $7.49 $6.99

  10. RAM Mounts B-379U-M81208 Tough-Ball Base with M8 x 1.25 Pitch Male Threaded Post

    RAM Mounts B-379U-M81208 Tough-Ball Base with M8 x 1.25 Pitch Male Threaded Post

    The RAP-B-379U-M81208 is an M8 x 1.25mm male threaded base post connected to a 1" diameter rubber ball. 

    Many mount points available including any M8 x 1.25 threaded mirror hole.

    Learn More
    $9.49 $8.49

  11. RAM-B-309-3 ball with screw for any 6mm-dia. hole (also fits RAM-B-309-1 base)

    RAM Mounts B-309-3U Base with M6 Female Threaded Post to Add Second Base to B-309-1 Mounts

    This ball connects to the open hole on the side of the RAM-B-309-1 (single 1'' ball) that fits most motorcycle's master cylinder clamps. Item can also be installed on any 6mm-diameter hole. Learn More
    $10.49 $9.49

  12. RAM motorcycle base for M8 screw

    RAM Mounts B-367U Base for Handlebar Clamps with M8 Bolts

    Your motorcycle rides on rubber tires for grip and to soften the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, the turn of a single knob grips the adjustment arm to a rubber ball designed to dampen shock and vibration. With RAM products, it's all grip and no slip plus protection for your valuable electronics. Simply place our easy to install ball base onto the motorcycle handlebar top clamp and you're done. After that, a world of mounting possibilities just opened up. Fits 2004-2012 BMW R1200GS rear handlebar clamp screws and Triumph Explorer handlebar clamp screws. Learn More
    $12.49 $9.49

  13. SALE
    SW-MOTECH Bags-Connection Navi bag pouch for Quick-Lock tank bags and gadget mounts, large

    SW-MOTECH Bags-Connection Navi bag pouch for Quick-Lock tank bags and gadget mounts, large

    This large-sized, weather-resistant device pouch is perfect for mounting your navigation devices and smart phone onto your motorcycle.

    Learn More
    $30.00 $9.99

  14. RAM Mounts B-202U-GOP1 Custom GoPro Hero Adapter

    RAM Mounts B-202U-GOP1 Custom GoPro Hero Adapter

    The RAP-B-202U-GOP1 consists of a 1" diameter rubber ball, connected to a custom GoPro® adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket. Learn More
    $10.99 $9.99

  15. SALE
    AGS single-use CONNECTOR PROTECTOR (0.14 oz./4gm pouch)

    AGS single-use CONNECTOR PROTECTOR (0.14 oz./4gm pouch)

    Connector Protector helps avoid electrical failure by locking out moisture and avoiding corrosion. Learn More
    $1.50 $0.95

  16. SALE
    NEBO LR44 Replacement batteries for LUMO Clip Light - 3 pack

    NEBO LR44 Replacement batteries for LUMO Clip Light - 3 pack

    One package of three (3) LR44 Alkaline 1.5-volt batteries. Replacement batteries for the NEBO 25 lumen clip light and many other devices such as laser pointers, watches, cameras and transmitters.

    Learn More
    $2.99 $0.99

  17. SALE
    Denali Screw kit for Handlebar 12-volt socket Mounting Brackets CPA.00.006.150 & CPA.00.006.160 (four M8x45mm bolts)
    $12.50 $2.99

  18. Techmount GEN 4 Rectangular Top Plate with AMPS Mounting Pattern

    Techmount GEN 4 Rectangular Top Plate with AMPS Mounting Pattern

    AMPS Mounting Plate for Techmount GEN 4 ball mounts, Learn More
    $4.95

  19. Techmount GEN 4 Universal Adapter for non GEN 4 Techmount Accessory Top Plates in Black

    Techmount GEN 4 Universal Adapter for non GEN 4 Techmount Accessory Top Plates in Black

    Universal Adapter to use non GEN 4 Techmount Accessory Top Plates with Techmount GEN 4 Mounting systems. Learn More
    $4.95

  20. Yamaha Reverse Thread Mirror Adapter

    Yamaha Reverse Thread Mirror Adapter

    The Yamaha Reverse Thread Mirror Adapter should be used for Yamaha motorcycles with reverse threaded mirror mounts and do not already come equipt with a reverse thread conversion (some WR250 models).

    Use in conjunction with the M10 x 1.25 Ball Stud Base to add a RAM ball. Perfect for mounting Doubletake Mirrors.

    Learn More
    $5.00

  21. Mirror Mount Split Clamp Assembly

    Mirror Mount Split Clamp Assembly

    Adapts a ball stud base onto any standard 7/8 handlebar.

    Can be used on any bike with 7/8 handlebars to create or replace a mirror perch. For use with Ram Base with M10 x 1.25 pitch to add a RAM ball, perfect for use with Doubletake Mirrors.

    Learn More
    $5.00

  22. SALE
    Interphone Assorted Spare Parts for F5 Units (1 adhesive assembly support, 1 clip assembly support, 1 foam windscreen, velcro adhesive)

    Interphone Assorted Spare Parts for F5 Units (1 adhesive assembly support, 1 clip assembly support, 1 foam windscreen, velcro adhesive)

    This is a complete kit of spare parts for the Interphone F5. Use it to replace original pieces or add to the collection!

    Compatible with Interphone F5 communicator units.

    Learn More
    $12.99 $5.99

  23. SALE
    Garmin VIRB Tripod Mount

    Garmin VIRB Tripod Mount

    Securely lock your VIRB into any standard tripod. Learn More
    $6.99 $6.30

  24. RAM-HOL-GA22U mount for Garmin 2XX, 2XXW, StreetPilot i-Series and c5xx and Garmin units with the small round socket

    RAM Mounts HOL-GA22U Cradle for Garmin StreetPilot c530, c550, c580, i2, i3, & i5

    Includes RAM-HOL-GA22U holder for Garmin StreetPilot c530, c550, c580, i2, i3, & i5. Learn More
    $7.99 $6.49

  25. RAP-326MU RAM EZY-Mount Quick Release, Male
    $6.99 $6.49

  26. SALE
    SW-MOTECH Adapter to Convert Tank Ring Bullet Connectors to SAE

    SW-MOTECH Adapter to Convert Tank Ring Bullet Connectors to SAE

    This adapter allows a 12 V (volt) connection from QUICK-LOCK electric tank ring to SAE via a 3.9 inch (10 cm) cable. Learn More
    $7.95 $6.95

  27. Garmin GPS XM radio antenna bracket

    RAM Mounts XM or GPS Antenna Adapter Plate with AMPS Hole Pattern

    Designed to hold an XM or GPS antenna magnetically or via screw down attachment, the RAM-344U plate will attach between any RAM base with the AMPS hole pattern and most standard XM units and RAM GPS cradles. Mount your satellite radio receiver or GPS in a RAM cradle and antenna all on a single platform for both ease of installation and use. Learn More
    $6.99

  28. RAM Mounts UNPKD RAM-B-347U 2”x 1.7” Base With 1” Ball, Universal AMPs Hole Pattern For Garmin Zumo, TomTom Rider & Urban Rider - Powder Coated Marine Grade Aluminum

    RAM Mounts B-347U Rectangular Base Plate with AMPS Hole Pattern | 2in x 1.7in

    The RAM mounts RAM-B-347U 2”x 1.7” base with 1” ball, universal AMPs hole pattern is your Garmin Zumo, TomTom Rider & Urban Rider cradle mounting solution. This product is manufactured out of marine grade aluminum and black powder coated for a durable finish. The base features a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base, which has four pre-drilled holes at each corner creating the universal AMPs pattern. Easily attach the RAM-B-347U to your RAM Mount on your motorcycle for safe and secure mounting solution for your GPS cradle. Learn More
    $7.99 $6.99

  29. SALE
    Garmin VIRB Anti-Glare Screen Protectors

    Garmin VIRB Anti-Glare Screen Protectors

    Reduce sunlight glare, smudges and scratches on your VIRB and VIRB Elite. Learn More
    $7.99 $7.20

  30. RAM Mounts B-337U Base with 1/4-20 Female Threaded Hex Hole

    RAM Mounts B-337U Base with 1/4-20 Female Threaded Hex Hole

    The RAM-B-337U includes a 1/4"-20 female thread hex hole connected to a 1" rubber ball. Learn More
    $8.49 $7.49

  31. Thumb Screw w/ lockwasher for TechMount standard top plates, black

    Thumb Screw w/ lockwasher for TechMount standard top plates, black

    1/2-inch x 1/4-20 pitch. Fits all standard top plates; used to secure a camera or other accessories that require a 1/2" screw. Learn More
    $7.95

  32. Replacement 5-pin relay (for Electrical Connection power distribution block, Stebel Air Horn or Denali SoundBomb Compact Dual-Tone Air Horn wiring kits)
    $7.99 $7.49

  33. Techmount 4 screw AMP's to 4 square pin hole
    $7.95

  34. Techmount adapter for attaching devices with 4 square holes to AMPS pattern Mounted to a handlebar mount

    Techmount adapter for attaching devices with 4 square holes to AMPS pattern

    This kit may be mounted directly to any Techmount standard top plate, the Techmount Quick Change Adapter, the Bags-Connection GPS/PDA/RAM gadget holder bracket for Quick-Lock Tankbags or any SW-MOTECH GPS holder. Includes 4 countersunk screws and matching nylock nuts for attachment to a surface with a 4-hole amps hole pattern. Learn More
    $7.95

  35. Techmount adapter for attaching devices with female Dual T pattern to AMPS pattern

    Techmount adapter for attaching devices with female Dual T pattern to AMPS pattern

    This kit may be mounted directly to any Techmount standard top plate, the Techmount Quick Change Adapter, the Bags-Connection GPS/PDA/RAM gadget holder bracket for Quick-Lock Tankbags or any SW-MOTECH GPS holder. Used with Magellan GPS devices and other devices with a female Dual T pattern. Learn More
    $7.95

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 82 total

Page:
  1. 1
  2. 2
  3. 3