Electronics & Wiring

LOUD! Stylish! Rugged!

Producing an earsplitting 120 decibels of sound, the SoundBomb is 4 times louder than a standard motorcycle horn! The Denali™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the SoundBomb will practically disappear once installed.

Learn More

At 113 decibels, the distinct low-tone sound from the DENALI SoundBomb Mini Motorcycle Horn is twice as loud as a typical 100 decibel disc horn. Designed to be a direct Plug & Play upgrade from your factory horn, requiring no additional relay or wiring harness as long as the original horn has blade-style electrical connections. When stock isn't quite enough, be heard with the SoundBomb Mini.

Learn More

The DENALI SoundBomb split dual-tone air horn produces an earsplitting 120 decibels of sound (four times louder than your typical motorcycle horn!) in a compact two piece design for motorcycles that have a limited amount of space. Ear splitting performance demands attention to make your presence known and keep you safe from traffic that might have failed to notice. A 3 foot length of air line is included to allow the powerful horn to be mounted separately from the compressor for the most efficient use of space. The lightweight components can be securely mounted with cable ties. For maximum safety the compact compressor instantly supplies air to the trumpet by pressing the factory horn button. An upgraded  Plug-N-Play Wiring Kit is highly recommended and simple to connect. Significantly improve your safety and visibility with the SoundBomb split dual tone air horn from DENALI!

Learn More

Mount single or double switches to motorcycles with horizontal perch bolt mounts with the Denali Flat Switch Mount For Horizontal Perch Bolts Learn More

Easy and inexpensive Plug-N-Play wiring kit for Denali SoundBomb Compact Dual-Tone Air Horn & Stebel Air Horn that does not require any cutting, soldering, slicing or crimping as long as the original horn has blade-style electrical connections. Clip one lead to your original horn trigger wire, one lead to battery ground, one lead to battery positive, and plug in your horn's relay.

If the original horn does not have blade-style electrical connections, the original horn connector needs to be removed and replaced with female spade connectors in order to use this harness. If your BMW does not have spade connectors please order the DENALI wiring adapter for BMW motorcycles (in the drop down menu above) to avoid modifying your wiring harness.

Learn More

Adjustable cradle for mounting larger cellphones or video iPods. This kit may be mounted directly to any RAM-B-238 mounting base, as well as any Techmount, Bags-Connection, SW-MOTECH GPS holder. Cradle Clamping Dimensions: Height Range: 4.75" - 6.25" Width Range: 2.25" - 3.25" Learn More

Easy and inexpensive Plug-N-Play wiring kit for Denali SoundBomb Compact Dual-Tone Air Horn & Stebel Air Horn that does not require any cutting, soldering, slicing or crimping as long as the original horn has blade-style electrical connections. Clip one lead to your original horn trigger wire, one lead to battery ground, one lead to battery positive, and plug in your horn's relay.

If the original horn does not have blade-style electrical connections, the original horn connector needs to be removed and replaced with female spade connectors in order to use this harness. If your BMW does not have spade connectors please order the DENALI wiring adapter for BMW motorcycles (in the drop down menu above) to avoid modifying your wiring harness.

Learn More

Just what you need with no frills. Get all the supplies and parts you need to wire your horn to your bike without having to go to the hardware store and still wonder if you have everything. Uses an ATC inline fuse instead of a typical, fragile glass fuse.

 

Learn More

Compatible with all 1" RAM balls. Connects a base to a cradle. Learn More

Sometimes, it's all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to complement your phone and become the most useful accessory on your motorcycle. Learn More

The SW-MOTECH 12V Cigarette Socket with Wiring Harness and In-line Fuse allows the use of external electronic devices. Learn More

Converts single top plate to double. Double mounting plate with dimensions each of 2.25" x 3". Learn More

Capture your most exciting moments using this mini action camera. Use the touchscreen to immediately review your shots. Learn More

Mini Connector/Cigarette lighter adapter - for BMW, Triumph, KTM etc. Learn More

The X-Grip™ IV has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. Learn More

Keeps your smart phone, GPS, MP3 charged while enjoying your ride Learn More

The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Learn More

This SW-MOTECH Navi Bag Pro Pouch for Quick-Lock Tankbags & Gadget Mounts is a weather resistant GPS or iPad cradle for all of you tech savvy riders. Designed for superior usability, the device holder is touch sensitive with a transparent, water-resistant screen cover. The Navi Case features a water-resistant zipper with rubber cord management eyelets to keep device wires protected and out of the way. This GPS pouch is beneficial for use in inclement weather as well as in perfectly sunny conditions. The unit includes an integrated sun visor to reduce sun glare for increased visibility.

Learn More

Designed for the unwaivering adventure rider for use in all weather conditions, this SW-MOTECH Navi Pro Case M features a touch sensitive, transparent screen cover with a fully sealed zipper. Reinforced with shape retaining EVA material in both the front and rear, the unit is capable of withstanding a beating from the elements. The Navi Case Pro comes with velcro straps inside of the interior intended to secure your expensive device. Each cradle is engineered with a plastic base prepared with a hole pattern which coordinates with both SW-MOTECH GPS mounts and RAM mounting systems. 

Features

• All weather safe for GPS and Smartphone
• Touch sensitive lid membrane
• Integrated sun shield
• Foam inlay and velcro fastenings
• Splash & water proof zipper
• Zipper garage
• Cable feed-through
• Back and front made of shape retaining EVA
• Base plate compatible to SW-MOTECH GPS mounts and Richter system
• Dimensions: 5.31" x 3.94" x 1.65"
• Window size: 4.53" x 3.15" 

Included

• Water resistant Navi Case Pro M
• Please note: GPS mount needed for installation

Learn More

This DENALI engine guard/crash bar horn mount kit allows fitment of the DENALI SoundBomb Compact Horn to engine guards, crash bars, or any tube 21mm-29mm in diameter. The clamp has a unique octagonal inner profile that allows the mount to securely grip a wide range of tube diameters and includes a fully rotatable mounting shelf to create a super versatile and robust horn mounting solution.

This elegant horn mount is intended for installing the SoundBomb Compact Horn, or the compressor of the SoundBomb Split Horn to OEM or aftermarket crash bars commonly found on adventure and dual sport motorcycles. Fitment allows the horn to be positioned inside of the crash bars, ensuring it will be protected in a tip over. The compressor of the SoundBomb Split Horn can also be mounted using this solution, however you will still need to find a separate location to mount the acoustic unit. Add this DENALI horn mount kit with your favorite SoundBomb and be heard!

Learn More

The RAM-B-346U brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball OFFSET. Made of Die Cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. Learn More

This optional RAM locking knob replaces the original thumb screw in RAM extension arms. In the locked position, turning the locking knob will neither tighten not loosen the extension arm screw, preventing unauthorized removal of the RAM arm or cradle from your motorcycle. It keeps honest people honest - it's not crowbar and buzz-saw safe (of course, neither is your motorcycle). Once you set your mount in the location you need, lock it and hide the key. Learn More

The SW-MOTECH Powerlet-style Socket with Wiring Harness and In-line Fuse allows the use of external electronic devices. Learn More

This adapter allows a 12 V (volt) connection from an SAE Tankbag to cigarette-style & powerlet-style outlet via a 4 inch (10 cm) cable. Learn More

GoPro removable LCD Screen keeps your camera small and light but provides the convenience of a touch screen when attached.

Learn More

Universal Wide Top Plate Kit with Velcro for Techmount GEN 4 Mounting systems. Learn More

Bike-specific mount kit for installing Denali SoundBomb Split Dual-Tone Air Horn on a Kawasaki Versys 1000LT. All mounting hardware and instructions included. For easy wiring, check out our Plug-n-Play wiring kit.

Learn More

SW-MOTECH Bags-Connection metal bracket for Quick-Lock tankbags. Garmin GPS holders that are compatible with RAM-B-238 balls, as well as the TomTom Rider, can be mounted directly to this metal bracket. Can also be used with SW-MOTECH Bags-Connection Navi bag pouch in extra large, large, medium, and small to hold many other small electronics.

Learn More

Tiny, all-weather clock/thermometer for handlebar or cockpit mounting. Includes ice alert and Velcro adhesive! Learn More

Want to mount your Tool Tube or Bottle Mount to your SW-MOTECH siderack? These brackets which can mount in an infinite number of positions are the answer. Learn More

This quick-release bike-specific electronics mount fits the Moto Guzzi Stelvio 1200. Learn More

This accessory mount uses existing windscreen mounting points to provide a secure, flat mounting surface with an adjustable viewing angle and height. Designed to move the GPS unit away from the rider to a more direct line of sight. This unit also has the added functionality of a quick release tab that removes the dampened device holder for a cleaner look. Pre-drilled holes are perfectly positioned to attach any RAM-B-238-compatible RAM mounts (sold separately) OR a TomTom Rider GPS. Learn More

Includes bar mount, 3" extension arm, and camera holder with 1/4-20 threaded stud. Fits most typical video cameras with a threaded hole; use with GoPro camera requires adapter (sold separately). Mounts to handlebars and crash bars 0.5" to 1.25" diameter. Learn More

This product is only necessary if you want to use your System on more than one motorcycle or to replace a lost or damaged Wiring Harness. Fits new 2012 version of TPX. Learn More