Electronics & Wiring

Harness the flexibility and intelligence of your BMW motorcycle's CANbus electrical system to make installation of accessories drastically easier with the DENALI CANsmart™ Controller. The CANsmart provides for plug-and-play installation of up to four electrical accessories, all controlled through your BMW's existing handlebar switches including the rotary "WunderWheel" multi controller. No more "tacked on" switches or confounding wire routing. In addition, because the CANsmart controls the power distribution functions, there's no need to wire in bulky relays to control your accessories.

Learn More

Harness the flexibility and intelligence of your BMW F650, F700, or F800's CANbus electrical system to make installation of accessories drastically easier with the DENALI CANsmart™ Controller. The CANsmart provides for plug-and-play installation of up to four electrical accessories, all controlled through your BMW's existing handlebar switches. No more "tacked on" switches or confounding wire routing. In addition, because the CANsmart controls the power distribution functions, there's no need to wire in bulky relays to control your accessories.

Learn More

LOUD! Stylish! Rugged!

Producing an earsplitting 120 decibels of sound, the SoundBomb is 4 times louder than a standard motorcycle horn! The Denali™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the SoundBomb will practically disappear once installed.

Learn More

At 113 decibels, the distinct low-tone sound from the DENALI SoundBomb Mini Motorcycle Horn is twice as loud as a typical 100 decibel disc horn. Designed to be a direct Plug & Play upgrade from your factory horn, requiring no additional relay or wiring harness as long as the original horn has blade-style electrical connections. When stock isn't quite enough, be heard with the SoundBomb Mini.

Learn More

The Klim Krios Karbon Adventure Helmet ECE/DOT with pre-installed Sena 10U is designed to redefine ADV helmet technology as the only ADV helmet in North America weighing less than 1500 grams, that's light! Built with comfort and versatility, this helmet has 4 rider modes and has been tested many times. Loaded with features to suit the needs of any ADV rider, the Klim Krios Karbon Helmet with Sena is just right for your needs with communication built right into a helmet that offers visibility, ventilation, and protection all in one.

Learn More

The DENALI SoundBomb split dual-tone air horn produces an earsplitting 120 decibels of sound (four times louder than your typical motorcycle horn!) in a compact two piece design for motorcycles that have a limited amount of space. Ear splitting performance demands attention to make your presence known and keep you safe from traffic that might have failed to notice. A 3 foot length of air line is included to allow the powerful horn to be mounted separately from the compressor for the most efficient use of space. The lightweight components can be securely mounted with cable ties. For maximum safety the compact compressor instantly supplies air to the trumpet by pressing the factory horn button. An upgraded  Plug-N-Play Wiring Kit is highly recommended and simple to connect. Significantly improve your safety and visibility with the SoundBomb split dual tone air horn from DENALI!

Learn More

The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The rust proof metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. The base also includes black cover caps to be placed over the exposed ends of the u-bolt. Learn More

Compatible with all 1" RAM balls. Connects a base to a cradle. Learn More

Mount single or double switches to motorcycles with horizontal perch bolt mounts with the Denali Flat Switch Mount For Horizontal Perch Bolts Learn More

Not using the threaded hole for your bike mirror? RAM has the perfect 1" gadget mount. The RAM-B-349U threaded ball base fits many motorcycles including the Victory Vision. Place a RAM rubber ball on your motorcycle to quickly and easily mount a GPS, Cell Phone, MP3, Cup Holder or most any small electronic device. Learn More

Adjustable cradle for mounting larger cellphones or video iPods. This kit may be mounted directly to any RAM-B-238 mounting base, as well as any Techmount, Bags-Connection, SW-MOTECH GPS holder. Cradle Clamping Dimensions: Height Range: 4.75" - 6.25" Width Range: 2.25" - 3.25" Learn More

Easy and inexpensive Plug-N-Play wiring kit for Denali SoundBomb Compact Dual-Tone Air Horn & Stebel Air Horn that does not require any cutting, soldering, slicing or crimping as long as the original horn has blade-style electrical connections. Clip one lead to your original horn trigger wire, one lead to battery ground, one lead to battery positive, and plug in your horn's relay.

If the original horn does not have blade-style electrical connections, the original horn connector needs to be removed and replaced with female spade connectors in order to use this harness. If your BMW does not have spade connectors please order the DENALI wiring adapter for BMW motorcycles (in the drop down menu above) to avoid modifying your wiring harness.

Learn More

Required for all RAM device cradles when used with a RAM arm. Not required for connecting RAM device cradles to SW-MOTECH, Techmount, or Adaptive device mounts. Learn More

Compatible with all 1" RAM balls. Connects a base to a cradle. Learn More

Sometimes, it's all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to complement your phone and become the most useful accessory on your motorcycle. Learn More

Converts single top plate to double. Double mounting plate with dimensions each of 2.25" x 3". Learn More

Capture your most exciting moments using this mini action camera. Use the touchscreen to immediately review your shots. Learn More

Provide a secure and adjustable mounting system to mount a GPS, Smartphone or other device cradle, bag or holder to your motorcycle. Learn More

The RAP-B-200-12U, double socket twist arm, consists of a double 1" diameter open ball sockets with a 360° rotation point at the center of the arm. The rubber ball and socket at either end, and a central pivot point provides unsurpassed adjustability. The RAM ball sockets maximize ball coverage for optimal fit. Learn More

The X-Grip™ IV has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. Learn More

The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Learn More

This SW-MOTECH Navi Bag Pro Pouch for Quick-Lock Tankbags & Gadget Mounts is a weather resistant GPS or iPad cradle for all of you tech savvy riders. Designed for superior usability, the device holder is touch sensitive with a transparent, water-resistant screen cover. The Navi Case features a water-resistant zipper with rubber cord management eyelets to keep device wires protected and out of the way. This GPS pouch is beneficial for use in inclement weather as well as in perfectly sunny conditions. The unit includes an integrated sun visor to reduce sun glare for increased visibility.

Learn More

This DENALI SoundBomb Compact horn mount kit allows fitment of the horn to engine guards, crash bars, or any tube 21mm-29mm in diameter. The clamp has a unique octagonal inner profile that allows the mount to securely grip a wide range of tube diameters and includes a fully rotatable mounting shelf to create a super versatile and robust horn mounting solution.

This elegant horn mount is intended for installing the SoundBomb Compact Horn, or the compressor of the SoundBomb Split Horn to OEM or aftermarket crash bars commonly found on adventure and dual sport motorcycles. Fitment allows the horn to be positioned inside of the crash bars, ensuring it will be protected in a tip over. The compressor of the SoundBomb Split Horn can also be mounted using this solution, however you will still need to find a separate location to mount the acoustic unit. Add this DENALI horn mount kit with your favorite SoundBomb and be heard!

Learn More

The RAM-B-346U brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball OFFSET. Made of Die Cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. Learn More

A favorite world wide, the RAM self-leveling drink cup holder will bring a smile to anyone’s face when they get it. Learn More

Not using the threaded hole for your bike mirror? RAM has the perfect 1" gadget mount. The RAM-B-349-1U threaded ball base fits many motorcycles including BMW R1200GS, F650GS twins and F800GS threaded mirror holes.

Place a RAM rubber ball on your motorcycle to quickly and easily mount a GPS, Cell Phone, MP3, Cup Holder or most any small electronic device. Ideal for use with Doubletake Mirrors.

Learn More

Universal Wide Top Plate Kit with Velcro for Techmount GEN 4 Mounting systems. Learn More

Includes RAM-B-202 base with 2.5" diameter platform. Compatible with all 1" RAM receptacles. Requires RAP-300-1U. Learn More

Plate is 0.87" wide X 2.25" long with a 11mm hole in one end and a 1" RAM ball at the other. Perfect for all motorcycles with standard M10 handlebar mirror mounts. Can be used with most bikes by BMW, Ducati, Honda, Kawasaki, KTM, Suzuki, Triumph, Yamaha, and others with handlebar-mounted mirrors. Learn More

SW-MOTECH metal bracket for Quick-Lock tankbags. Garmin GPS holders that are compatible with RAM-B-238 balls, as well as the TomTom Rider, can be mounted directly to this metal bracket. Can also be used with SW-MOTECH Navi bag pouch in extra large, large, medium, and small to hold many other small electronics.

Learn More

Your motorcycle rides on rubber tires for grip and to soften the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, the turn of a single knob grips the adjustment arm to a rubber ball designed to dampen shock and vibration. With RAM products, it's all grip and no slip plus protection for your valuable electronics. Simply place our easy to install ball base onto the motorcycle handlebar top clamp and you're done. After that, a world of mounting possibilities just opened up. Fits 2004-2012 BMW R1200GS rear handlebar clamp screws and Triumph Explorer handlebar clamp screws. Learn More

The RAP-B-202U-GOP1 consists of a 1" diameter rubber ball, connected to a custom GoPro® adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket. Learn More

The future of power management......... is here.

The old methods of power distribution have gone the way of the floppy disk (remember those?).

No more checking or replacing fuses, or installing relays for powering high amperage electronics.

The PDM60 Power Distribution Module has 6 power circuits, making it easy to handle all your gadgets and farkles.The bright LED indicators keep you informed of the status of each circuit.

Learn More

The RAP-B-379U-M81208 is an M8 x 1.25mm male threaded base post connected to a 1" diameter rubber ball. 

Many mount points available including any M8 x 1.25 threaded mirror hole.

Learn More