x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us
Electronics & Wiring

Electronics & Wiring

Electronics & Wiring

Electronics & Wiring

If you're looking to add electronic devices to enhance the safety and comfort of your motorcycle, you're in the right place.  Browse from a large selection of wiring, fuse blocks, device mounts and cradles made for your motorbike that will get the job done. We carry the best, most innovative and high quality motorcycle electronic and wiring products from tried, tested and true brands like 3BR Power Sports, AdMore Lighting, Battery Tender, Denali, DrySpec, Garmin, GoPro, Interphone, RAM Mounts, Sena, SW-MOTECH and many more. Shop with us to stay powered up and connected with wiring and electrical components made for motorcyclists and their motorcycles.

 

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 127 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. SW-MOTECH GPS Mount For M8 & M10 Mirror Mounts

    SW-MOTECH GPS Mount For M8 & M10 Mirror Mounts

    The SW-MOTECH GPS Mount For M8 & M10 Mirror Mounts allows you to mount your GPS / Camera to you mirror mount on your handlebars. Learn More
    $36.95

  2. RAM Mounts HOL-UN10BU Universal X-Grip IV Large Phone / Phablet Holder with 1in Ball

    RAM Mounts HOL-UN10BU Universal X-Grip IV Cradle for Large Phones or Phablets

    The X-Grip™ IV has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. Learn More
    $28.99

  3. RAM Mounts B-379U-M81208 Tough-Ball Base with M8 x 1.25 Pitch Male Threaded Post

    RAM Mounts B-379U-M81208 Tough-Ball Base with M8 x 1.25 Pitch Male Threaded Post

    The RAP-B-379U-M81208 is an M8 x 1.25mm male threaded base post connected to a 1" diameter rubber ball. 

    Many mount points available including any M8 x 1.25 threaded mirror hole.

    Learn More
    $8.49

  4. DENALI Plug-N-Play Wiring Kit for Denali SoundBomb Compact & Split Dual-Tone Air Horns & Stebel Air Horn

    DENALI Plug-N-Play Wiring Kit for Denali SoundBomb Compact & Split Dual-Tone Air Horns & Stebel Air Horn

    Easy and inexpensive Plug-N-Play wiring kit for Denali SoundBomb Compact Dual-Tone Air Horn & Stebel Air Horn that does not require any cutting, soldering, slicing or crimping as long as the original horn has blade-style electrical connections. Clip one lead to your original horn trigger wire, one lead to battery ground, one lead to battery positive, and plug in your horn's relay.

    If the original horn does not have blade-style electrical connections, the original horn connector needs to be removed and replaced with female spade connectors in order to use this harness. If your BMW does not have spade connectors please order the DENALI wiring adapter for BMW motorcycles (in the drop down menu above) to avoid modifying your wiring harness.

    Learn More
    $26.99

  5. Techmount Double Top Plate Kit w/o shaft, black, silver or chrome

    Techmount Double Top Plate Kit w/o shaft, black, silver or chrome

    Converts single top plate to double. Double mounting plate with dimensions each of 2.25" x 3". Learn More
    $39.95

  6. RAM Mounts X-GRIP Spring Loaded Universal Holder W/ 1" BALL

    RAM Mounts HOL-UN7BU Universal X-Grip Cradle for Cell Phones & iPhones

    Sometimes, it's all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to complement your phone and become the most useful accessory on your motorcycle. Learn More
    $25.49

  7. RAM-B-231ZU RAM motorcycle handlebar base with U-bolt for 0.5" to 1.25" diameter bars

    RAM Mounts B-231ZU Universal Handlebar Base with Zinc Coated U-Bolt for 0.5in to 1.25in Bars

    The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The rust proof metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. The base also includes black cover caps to be placed over the exposed ends of the u-bolt. Learn More
    $13.99

  8. RAP-B-200-12U RAM VARIABLE SWIVEL ARM

    RAM Mounts B-200-12U Double Socket Arm with Swivel

    The RAP-B-200-12U, double socket twist arm, consists of a double 1" diameter open ball sockets with a 360° rotation point at the center of the arm. The rubber ball and socket at either end, and a central pivot point provides unsurpassed adjustability. The RAM ball sockets maximize ball coverage for optimal fit. Learn More
    $12.99

  9. TPX Replacement Wiring Harness (REVISED connector)

    TPX Replacement Wiring Harness (REVISED connector)

    This product is only necessary if you want to use your System on more than one motorcycle or to replace a lost or damaged Wiring Harness. Fits new 2012 version of TPX. Learn More
    $35.00

  10. SW-MOTECH 12V Cigarette Socket with Wiring Harness and In-line Fuse

    SW-MOTECH 12V Cigarette Socket with Wiring Harness and In-line Fuse

    The SW-MOTECH 12V Cigarette Socket with Wiring Harness and In-line Fuse allows the use of external electronic devices. Learn More
    $37.95

  11. Garmin Zumo 350LM & 395LM Motorcycle Power Cable

    Garmin Zumo 350LM & 395LM Motorcycle Power Cable

    This Garmin Power Cable allows you to charge your Zumo 350LM & Zumo 395LM GPS unit to your motorcycle. Learn More
    $39.99

  12. Denali Do-It-Yourself wiring kit for Stebel Air Horn & Denali SoundBomb Compact Dual-Tone Air Horn

    Denali Do-It-Yourself wiring kit for Stebel Air Horn & Denali SoundBomb Compact Dual-Tone Air Horn

    Just what you need with no frills. Get all the supplies and parts you need to wire your horn to your bike without having to go to the hardware store and still wonder if you have everything. Uses an ATC inline fuse instead of a typical, fragile glass fuse.

     

    Learn More
    $14.99

  13. RAM Mounts B-202U-GOP1 Custom GoPro Hero Adapter

    RAM Mounts B-202U-GOP1 Custom GoPro Hero Adapter

    The RAP-B-202U-GOP1 consists of a 1" diameter rubber ball, connected to a custom GoPro® adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket. Learn More
    $9.49

  14. RAM Mounts Cradle Mount Kit for Motorcycle Handlebars and Crash Bars

    RAM Mounts Cradle Mount Kit for Motorcycle Handlebars and Crash Bars

    Includes a U-bolt bar mount base, 2" extension arm, and diamond adapter base. The diamond adapter base has a hole pattern that matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles. Accommodates rails from 0.50" to 1.25" in diameter. Learn More
    $33.47

  15. RAM Mounts B-349-1U Base with M10 x 1.5 Pitch Threaded Post

    RAM Mounts B-349-1U Base with M10 x 1.5 Pitch Threaded Post

    Not using the threaded hole for your bike mirror? RAM has the perfect 1" gadget mount. The RAM-B-349-1U threaded ball base fits many motorcycles including BMW R1200GS, F650GS twins and F800GS threaded mirror holes.

    Place a RAM rubber ball on your motorcycle to quickly and easily mount a GPS, Cell Phone, MP3, Cup Holder or most any small electronic device. Ideal for use with Doubletake Mirrors.

    Learn More
    $10.99

  16. SW-MOTECH Aluminum Power Socket Bracket for Mounting on M8 bolt

    SW-MOTECH Aluminum Euro Power Socket Bracket for Mounting on M8 bolt

    The SW-MOTECH aluminum Euro power socket bracket for mounting on M8 bolt holds a Euro power socket (sold separately) and easily mounts to the handlebar with an M8 bolt. Powder coated alloy is durable and lightweight with a factory looking finish. Use this SW-MOTECH Aluminum Euro power socket bracket on your motorcycle to make charging 12 volt accessories a snap!

    Learn More
    $22.95

  17. SENA 10R Replacement Speakers

    SENA 10R Replacement Speakers

    The SENA 10R replacement speakers can be swapped in for old original speakers that might not perform the way they used to. Keep a spare set in your tank bag or coat pocket. This package includes the left and right-hand side replacement speakers. Learn More
    $31.95

  18. RAM Mounts B-354U Track-Ball with T-Bolt Attachment for Tough Track Platform

    RAM Mounts B-354U Track-Ball with T-Bolt Attachment for Tough Track Platform

    Equip a camera or other device to a hard case or other large flat surface with a RAM system that includes a Track-Ball with T-Bolt attachment mount. Easy to mount to a Tough Track platform, this base allows fitment of a double socket RAM arm and device adapters to securely hold your gear where you need it. Mount a RAM Track-Ball to your motorcycle luggage or other flat surface and start recording your adventures today. Learn More
    $8.49

  19. SENA 10S Replacement Speakers

    SENA 10S Replacement Speakers

    This pair of SENA 10S replacement speakers can be swapped in for old original speakers that might not perform the way they used to. Keep a spare set in your tank bag for those "just in case moments". This package includes the left and right-hand side replacement speakers. Learn More
    $31.95

  20. RAM Mounts HOL-GUN1U Bracket Clip for Sidearm Belt Holsters

    RAM Mounts HOL-GUN1U Bracket Clip for Sidearm Belt Holsters

    Whether you're a park ranger or a serious outdoorsman, having your side arm ready just makes sense. Ram has designed this to make it easy to adapt your holster with this to any Ram mount product.

    Learn More
    $19.99

  21. RAM Mounts B-400U Tough-Claw Clamp-On Base for Round, Oval, or Square 0.625in to 1.5in Bars

    RAM Mounts B-400U Tough-Claw Clamp-On Base for Round, Oval, or Square 0.625in to 1.5in Bars

    The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Learn More
    $30.49

  22. 12V BATTERY TENDER JUNIOR

    12V BATTERY TENDER JUNIOR

    The Battery Tender® Junior is much more than a trickle charger. It has a brain. It's lightweight, compact, and fully automatic; very easy to use, especially in small spaces. It will keep your battery fully charged so that it is ready to go when you are! Learn More
    $39.95

  23. Ram Adjustable Socket W/OCT Sockets for Motorcycle

    RAM Mounts B-200-2U Double Socket Arm with Double Swivel & Pivot | 5.5in

    Adding the most Ridiculous Mega Swivel Rotating mount to your ball! Learn More
    $19.49

  24. Givi S110 12V Handlebar Outlet

    Givi S110 12V Handlebar Outlet

    12V handlebar electrical outlet socket. Learn More
    $31.50

  25. SW-MOTECH Navi Case Pro L | All Weather - Black

    SW-MOTECH Navi Case Pro L | All Weather - Black

    This SW-MOTECH Navi Bag Pro Pouch for Quick-Lock Tankbags & Gadget Mounts is a weather resistant GPS or iPad cradle for all of you tech savvy riders. Designed for superior usability, the device holder is touch sensitive with a transparent, water-resistant screen cover. The Navi Case features a water-resistant zipper with rubber cord management eyelets to keep device wires protected and out of the way. This GPS pouch is beneficial for use in inclement weather as well as in perfectly sunny conditions. The unit includes an integrated sun visor to reduce sun glare for increased visibility.

    Learn More
    $35.95

  26. TPX Replacement Wiring Harness

    TPX Replacement Wiring Harness

    This product is only necessary if you want to use your System on more than one motorcycle or to replace a lost or damaged Wiring Harness. Fits Old Style TPX. Learn More
    $35.00

  27. RAM-B-237 camera mount without support platform.  Comaptible with all 1"-diameter RAM sockets.

    RAM Mounts B-237U Base with 1/4-20 Threaded Post for Cameras

    Includes RAM-B-237 camera mount (without platform) with 1/4" x 20 male threaded stud. Can also be used as a base if threaded into a 1/4-20 hole. Learn More
    $7.99

  28. RAM-B-202 round base with 1"-diameter ball mount.

    RAM Mounts B-202U Round Plate with AMPS Hole Pattern

    Includes RAM-B-202 base with 2.5" diameter platform. Compatible with all 1" RAM receptacles. Requires RAP-300-1U. Learn More
    $7.49

  29. RAM-B-201 3"-long extension arm.  For use with all RAM components with 1"-diameter ball mounts.  RAM extension arms are used to bridge the gap between a RAM base plate and a RAM device holder, such as a GPS holder.   All RAM components are sold

    RAM Mounts B-201U Double Socket Arm | 3in

    Compatible with all 1" RAM balls. Connects a base to a cradle. Learn More
    $12.49

  30. RAM-HOL-GA5 mount for Garmin E-Trex-series GPS.

    RAM Mounts HOL-GA5U Cradle for Garmin e-Trex Legend, Summit, Venture, & Vista

    Includes RAM-HOL-GA5U holder for Garmin e-Trex Legend, Summit, Venture, & Vista. Learn More
    $14.49

  31. RAM-HOL-GA7 mount for Garmin GPSMAP 176, 176C, 196, 276C, & 296 GPS.

    RAM Mounts HOL-GA7U Cradle for Garmin GPSMAP 176, 176C, 196, 276C, 296, 376C, 378, 396, 478, & 496

    Includes RAM-HOL-GA7U holder for Garmin GPSMAP 176, 176C, 196, 276C, 296, 376C, 378, 396, 478, & 496 Learn More
    $9.49

  32. RAM-HOL-GA9 mount for Garmin Streetpilot 2610, 2620, and 2650 GPS.

    RAM Mounts HOL-GA9U Cradle for Garmin BMW Navigator II, & III, StreetPilot 2610, 2620. 2650, 2660, 2720, 2730, & 2820

    Includes RAM-HOL-GA9U holder for Garmin BMW Navigator II, & III, StreetPilot 2610, 2620. 2650, 2660, 2720, 2730, & 2820 Learn More
    $14.49

  33. RAM-B-309-7U stainless steel Clutch, Brake, U-bolt combo with ball (for 1-1/8", 1", 7/8", 3/4", & 0.5" diameter bars)

    RAM Mounts B-309-7U Combination Base for 0.5in to 1.25in Handlebars or Brake & Clutch Control Clamps

    Includes U-bolt and all mounting hardware to add a single RAM ball to a 1-1/8", 1", 7/8", or 3/4" diameter bar, as well as being able to connect to your handlebar's left-side clutch clamp or right-side brake clamp. Learn More
    $18.99

  34. RAM-B-238 Diamond Base Plate with 1"-diameter ball mount.  The RAM-B-238 is required for attachment of all RAM GPS holders (sold separately) to any RAM mount system.

    RAM Mounts B-238U Diamond Plate Cradle Adapter

    Required for all RAM device cradles when used with a RAM arm. Not required for connecting RAM device cradles to SW-MOTECH, Techmount, or Adaptive device mounts. Learn More
    $6.99

  35. RAM-B-252U Plate Base with 11mm Hole and 1'' Ball

    RAM Mounts B-252U Offset M10 Bolt & Mirror Post Base

    Plate is 0.87" wide X 2.25" long with a 11mm hole in one end and a 1" RAM ball at the other. Perfect for all motorcycles with standard M10 handlebar mirror mounts. Can be used with most bikes by BMW, Ducati, Honda, Kawasaki, KTM, Suzuki, Triumph, Yamaha, and others with handlebar-mounted mirrors. Learn More
    $10.99

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 127 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
Chat with us!