|Twisted Throttle LLC
Cart - $0.00

You have no items in your shopping cart.

CAD USD
YouTube Facebook Twitter 855-255-5550 Email Us
Handlebar Risers & Mounts

Handlebar Risers & Mounts

Handlebar Risers & Mounts

Grid List

per page

Items 41 to 50 of 89 total

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7
  1. Barkbusters Storm Handguards (Tiger 1050)

    Barkbusters 28mm VSB Handlebars with Riser/Converter (Triumph Tiger 1050i, '07-'10)

    New for 2010, Barkbusters presents their Variable Section 28mm diameter handlebar. The bars are 22mm (7/8") at the grips/control perches, with an immediate taper to 28mm for the majority of the bar. This kit includes a bike-specific riser/converter for the Triumph Tiger 1050. No change of cables or controls necessary. Silver. Learn More
    $160.99

  2. Handlebar Risers (Yamaha XT1200Z Super Tenere, '10) by SW-MOTECH - pair

    Handlebar Risers (Yamaha XT1200Z Super Tenere, '10) by SW-MOTECH - pair

    Provides a more upright, comfortable riding position by raising the original handlebar by approximately 25mm (1 inch). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. No change of control cables, wiring, or hoses is required. It is recommended that the installer should check for adequate cable/wiring/hose slack during installation. Learn More
    $85.99

  3. Handlebar risers (Ducati Multistrada 1200, '10-) by SW-MOTECH, Black 30mm height

    Handlebar risers (Ducati Multistrada 1200, '10-) by SW-MOTECH, Black 30mm height

    Includes one pair of handlebar risers (30mm riser height) with a powdercoated black finish. No front brakeline extension is necessary for use of handlebars in their original rotational position within the handlebar clamps; however, if you roll your handlebars further rearward within the handlebar clamps, you may need to extend the front brakeline if using this handlebar riser. Learn More
    $49.99

  4. Handlebar risers (Triumph Tiger Explorer 1200, '12-, Tiger 800 / 800XC, '11-) 20mm rise

    Handlebar risers (Triumph Tiger Explorer 1200, '12-, Tiger 800 / 800XC, '11-) 20mm rise

    For use with original top clamp. Adds an additional 20mm of rise to the bar height without changing of control cables, wiring, or hoses. However, the installer should always check for adequate cable/wiring/hose slack during installation. Available in polished silver finish.


    Learn More
    $59.99

  5. SW-MOTECH Handlebar Risers For BMW R1200GS '08 - '12

    SW-MOTECH Handlebar Risers For BMW R1200GS '08 - '12

    Provides a more upright, comfortable riding position by raising the original 1-1/8" (28mm) diameter tubular handlebar up 20mm and back 30mm. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. Also perfect for use with oversize handlebars (ProTaper, Magura, etc.). Learn More
    $169.99

  6. SW-MOTECH handlebar riser for Kawasaki Z1000/Z750.  20mm rise.  Black.

    SW-MOTECH handlebar riser for Kawasaki Z1000/Z750. 20mm rise. Black.

    Includes:

    • Bar Riser Mounts
    • Mounting instructions

    Uses original spacer

    Requires no change of any control cables, wiring, or hoses. 

    Learn More
    $71.99

  7. Handlebar risers (BMW, Ducati, Kawasaki, KTM LC4, Gas-Gas, Honda, MZ, Suzuki, Triumph, Yamaha), rise height of 20mm, 25mm, 30mm or 50mm - by SW-MOTECH

    Handlebar risers (BMW, Ducati, Kawasaki, KTM LC4, Gas-Gas, Honda, MZ, Suzuki, Triumph, Yamaha), rise height of 20mm, 25mm, 30mm or 50mm - by SW-MOTECH

    Provides a more upright, comfortable riding position by raising the original 7/8" (22mm) diameter tubular handlebar. Learn More
    $59.99

  8. Handlebar risers (Honda ST1300) - pair

    Handlebar risers (Honda ST1300) - pair

    The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm) and back 1" (25mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. Learn More
    $129.95

  9. Handlebar risers (Honda CBR1100XX Blackbird, '97- & VFR800 VTEC, '02-) - pair

    Handlebar risers (Honda CBR1100XX Blackbird, '97- & VFR800 VTEC, '02-) - pair

    The risers are placed between the fork crown and the handlebars to raise the bars up 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. Learn More
    $109.95

  10. Handlebar risers (Suzuki GSX1300R Hayabusa, '00-'07) - pair, 1.25-inch height shown.  0.75-inch height also available.

    Handlebar risers (Suzuki GSX1300R Hayabusa, '00-'07) - pair, 1.25-inch height

    The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (38mm). This is double the riser height of part# S122. This will help to relieve wrist and neck pain on long rides. We recommend rerouting the choke cable to remove cable tension when the handlebars are turned to full right or left. Learn More
    $149.95

Grid List

per page

Items 41 to 50 of 89 total

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7