Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us
Handlebar Risers & Mounts

Handlebar Risers & Mounts

Handlebar Risers & Mounts

Grid List

per page

Items 11 to 20 of 91 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. SW-Motech Handlebar Risers for Yamaha XT1200Z Super Tenere '10-'13 - Pair

    SW-Motech Handlebar Risers for Yamaha XT1200Z Super Tenere '10-'13 - Pair

    Provides a more upright, comfortable riding position by raising the original handlebar by approximately 25mm (1 inch). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. No change of control cables, wiring, or hoses is required. It is recommended that the installer should check for adequate cable/wiring/hose slack during installation. Learn More
    $89.95

  2. Metric hexagon socket screw (M8x55mm, 1.25 thread pitch, DIN912, silver)
    $1.50

  3. Handlebar risers for BMW F650GS Dakar '00-'07 - pair

    Handlebar risers for BMW F650GS Dakar '00-'07 - pair

    The risers are placed between the fork crown and the handlebars to raise the bars up 4/5" (20mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. This is the same handlebar riser kit included in the VPS handguards for the BMW F650GS & F650GS/Dakar, '00-'07. Learn More
    $51.95

  4. SW-MOTECH Handlebar risers For BMW F800GS '08-'15, F800GS Adventure '14-'15 & F700GS '13-'15
    $49.95

  5. Metric hexagon socket screw (M8x50mm, 1.25 thread pitch, DIN912, silver)
    $1.50

  6. SW-MOTECH Handlebar riser barbacks & top clamps for 28mm bars - pair, 1.25" rise & 1" pullback

    SW-MOTECH Handlebar riser barbacks & top clamps for 28mm bars - pair, 1.25" rise & 1" pullback

    Provides a more upright, comfortable riding position by raising and retracting the original 28mm diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 30mm (1.25") and move them back 22mm (1.0"), producing an overall handlebar displacement of 35.4mm (1.4") at a 45 degree angle from the original position. Learn More
    $103.95

  7. Handlebar risers (Triumph Sprint ST 955, '01-'04 / Sprint ST 1050, '05- / Sprint RS, '00-'03)

    Handlebar risers (Triumph Sprint ST 955, '01-'04 / Sprint ST 1050, '05- / Sprint RS, '00-'03)

    The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm). This will help to relieve wrist and neck pain on long rides. Learn More
    $109.95

  8. SW-MOTECH 30mm handlebar riser for 28mm OD bars

    SW-MOTECH 30mm handlebar riser for 28mm OD bars

    Provides a more upright, comfortable riding position by raising the original 1 1/8" (28mm) diameter tubular handlebar. Learn More
    $74.95

  9. Metric hexagon socket screw (M8x60mm, 1.25 thread pitch, DIN912, silver)
    $1.50

  10. Handlebar risers Ducati Multistrada 1200, '10-'15 by SW-MOTECH, Black 30mm height

    Handlebar risers Ducati Multistrada 1200, '10-'15 by SW-MOTECH, Black 30mm height

    Includes one pair of handlebar risers (30mm riser height) with a powdercoated black finish. No front brakeline extension is necessary for use of handlebars in their original rotational position within the handlebar clamps; however, if you roll your handlebars further rearward within the handlebar clamps, you may need to extend the front brakeline if using this handlebar riser. Learn More
    $51.95

Grid List

per page

Items 11 to 20 of 91 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5