Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us
Handlebar Risers & Mounts

Handlebar Risers & Mounts

Handlebar Risers & Mounts

Grid List

per page

Items 11 to 20 of 60 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. SW-MOTECH 30mm handlebar riser for 28mm OD bars

    SW-MOTECH 30mm handlebar riser for 28mm OD bars

    Provides a more upright, comfortable riding position by raising the original 1 1/8" (28mm) diameter tubular handlebar. Learn More
    $71.99

  2. Metric hexagon socket screw (M8x50mm, 1.25 thread pitch, DIN912, silver)
    $1.50

  3. Metric hexagon socket screw (M8x55mm, 1.25 thread pitch, DIN912, silver)
    $1.50

  4. Handlebar risers for BMW F650GS ('00-'07) F650GS/Dakar ('00-'07) & G650GS ('09-'10) - pair

    Handlebar risers for BMW F650GS ('00-'07) F650GS/Dakar ('00-'07) & G650GS ('09-'10) - pair

    The risers are placed between the fork crown and the handlebars to raise the bars up 4/5" (20mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. This is the same handlebar riser kit included in the VPS handguards for the BMW F650GS & F650GS/Dakar, '00-'07. Learn More
    $49.99

  5. Handlebar risers (Ducati Multistrada 1200, '10-) by SW-MOTECH, Black 30mm height

    Handlebar risers (Ducati Multistrada 1200, '10-) by SW-MOTECH, Black 30mm height

    Includes one pair of handlebar risers (30mm riser height) with a powdercoated black finish. No front brakeline extension is necessary for use of handlebars in their original rotational position within the handlebar clamps; however, if you roll your handlebars further rearward within the handlebar clamps, you may need to extend the front brakeline if using this handlebar riser. Learn More
    $49.99

  6. SW-MOTECH Handlebar riser barbacks & top clamps for 28mm bars - pair, 1.25" rise & 1" pullback

    SW-MOTECH Handlebar riser barbacks & top clamps for 28mm bars - pair, 1.25" rise & 1" pullback

    Provides a more upright, comfortable riding position by raising and retracting the original 28mm diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 30mm (1.25") and move them back 22mm (1.0"), producing an overall handlebar displacement of 35.4mm (1.4") at a 45 degree angle from the original position. Learn More
    $99.99

  7. Handlebar Risers (Kawasaki Versys 650, '07-) by SW-Motech, silver 20mm height

    Handlebar Risers (Kawasaki Versys 650, '07-) by SW-Motech, silver 20mm height

    Includes one-piece handlebar riser block (20mm rise height) in silver, and longer screws.

    No modification of brake lines is necessary for installation. Learn More
    $71.99

  8. Denali Screw kit for Handlebar 12-volt socket Mounting Brackets CPA.00.006.150 & CPA.00.006.160 for 30mm Triumph bar riser (four M8x60mm bolts)
    $6.00

  9. Handlebar risers (BMW R1200GS and R1200GS Adventure, '08-) by SW-MOTECH- pair

    Handlebar risers (BMW R1200GS and R1200GS Adventure, '08- & HP2) by SW-MOTECH- pair

    Provides a 30mm rise in handlebar mount height for the 2008 and later R1200GS and R1200GS Adventure. Does not fit earlier models. Silver matches original handlebar attachment hardware. Learn More
    $82.99

  10. Handlebar risers for the Kawasaki Z750, Z750S, and Z1000 (-'06)

    Handlebar risers (Kawasaki Z750, Z750S, Z1000) - pair

    The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/2" (38mm). and back 1" (25mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. The risers are cut and powder coated to match the factory bracket. Learn More
    $89.95

Grid List

per page

Items 11 to 20 of 60 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5