Handlebar Risers & Mounts
Handlebar Risers & Mounts
-
Handlebar risers (Kawasaki Ninja 250R / EX250 / GPZ250S, -'07) - pair
The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (38mm) and back 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Longer bolts are supplied. Requires no change of any control cables, wiring, or hoses. Learn More$89.95 -
$1.50 -
$2.50
-
Screw kit for CPA.00.006.150 (four M8x45mm bolts)
For use with LEH.00.039.102 bar risers. Learn More$12.50 -
Handlebar risers (Kawasaki Ninja 650R / ER6F / ER6N, '06-'08)
The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm) and back approximately 5/8" (17mm). This will help to relieve wrist and neck pain on long rides. Longer bolts are supplied. Requires no change of any control cables, wiring, or hoses. Learn More$74.95 -
Screw kit for 20mm Ducati bar riser (four M8x45mm bolts)
For use with LEH.00.039.102 bar risers on Ducati motorcycles. Learn More$10.00 -
Handlebar risers (Kawasaki W650, all years)
The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm) and back approximately 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Longer bolts are supplied. Requires no change of any control cables, wiring, or hoses. Learn More$69.95 -
Handlebar risers (KTM LC4 SuperComp SC, '00- & EXC (all years) w/ original handlebars) by SW-MOTECH - pair
Provides a more upright, comfortable riding position by raising the original 7/8" (22mm) or 1-1/8" (28mm) diameter tubular handlebar by 30mm (1.2"). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. Learn More$34.99 -
Handlebar risers (Yamaha FJR1300, '01-'05) by SW-MOTECH - pair
Provides a more upright, comfortable riding position by raising the original handlebar by approximately 25mm (1 inch) and rotating them toward the rider by 15 degrees. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. Learn More$96.99 -
Handlebar risers (Kawasaki Vulcan 750, Vulcan Drifter, & Vulcan Nomad, '98-)
These risers fit Vulcans with 1" (25mm) tube handlebars. The risers are placed between the fork crown and the handlebars to raise the bars up 1" (25mm). This will help to relieve wrist and neck pain on long rides. Longer bolts are supplied. Requires no change of any control cables, wiring, or hoses. Learn More$89.95
