Handlebar Risers & Mounts

Provides a more upright, comfortable riding position by raising and retracting the original 7/8" (22mm) diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 25mm (1.0") and move them back 25mm (1.0"), producing an overall handlebar displacement of 35.4mm (1.4") at a 45 degree angle from the original position. Learn More

Provides a more upright, comfortable riding position by raising the original 7/8" (22mm) diameter tubular handlebar. Learn More

For use with original top clamp. Adds an additional 20mm of rise to the bar height without changing of control cables, wiring, or hoses. However, the installer should always check for adequate cable/wiring/hose slack during installation. Available in polished silver finish.


Learn More

Moves bars up & back diagonally approximately 2" to unload weight from wrists & forearms and relax the neck. Fits all 1-1/8" diameter handlebars, but is especially designed for use on BMW R1200GS '04-, R1200GS Adventure '06-, HP2, and KTM LC4 & LC8 models with 28mm-diameter handlebars. Clear anodized billet aluminum. Learn More

Provides a more upright, comfortable riding position by raising and retracting the original 28mm diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 30mm (1.25") and move them back 22mm (1.0"), producing an overall handlebar displacement of 35.4mm (1.4") at a 45 degree angle from the original position. Learn More

Provides a more upright, comfortable riding position by raising the original handlebar by approximately 25mm (1 inch). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. No change of control cables, wiring, or hoses is required. It is recommended that the installer should check for adequate cable/wiring/hose slack during installation. Learn More

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm). This will help to relieve wrist and neck pain on long rides. Does not require change of front brake hydraulic hose. Learn More

Includes one pair of handlebar risers (20mm riser height) in silver.

No modifications of brake lines are necessary for installation. Learn More

Includes one-piece handlebar riser block (20mm rise height) in silver, and longer screws.

No modification of brake lines is necessary for installation. Learn More