Handlebar Risers & Mounts

Provides a more upright, comfortable riding position by raising and retracting the original 7/8" (22mm) diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 25mm (1.0") and move them back 25mm (1.0"), producing an overall handlebar displacement of 35.4mm (1.4") at a 45 degree angle from the original position. Learn More

Moves bars up & back diagonally approximately 2" to unload weight from wrists & forearms and relax the neck. Fits all 1-1/8" diameter handlebars, but is especially designed for use on BMW R1200GS '04-, R1200GS Adventure '06-, HP2, and KTM LC4 & LC8 models with 28mm-diameter handlebars. Clear anodized billet aluminum. Learn More

Provides a more upright, comfortable riding position by raising and retracting the original 28mm diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 30mm (1.25") and move them back 22mm (1.0"), producing an overall handlebar displacement of 35.4mm (1.4") at a 45 degree angle from the original position. Learn More

Provides a more upright, comfortable riding position by raising the original handlebar by approximately 25mm (1 inch). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. No change of control cables, wiring, or hoses is required. It is recommended that the installer should check for adequate cable/wiring/hose slack during installation. Learn More

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm). This will help to relieve wrist and neck pain on long rides. Does not require change of front brake hydraulic hose. Learn More

Provides a 30mm rise in handlebar mount height for the 2008 and later R1200GS and R1200GS Adventure. Does not fit earlier models. Silver matches original handlebar attachment hardware. Learn More

The risers are placed between the fork crown and the handlebars to raise the bars up 1 inch (25mm) and back 5/8 inch (16mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. Learn More

The risers are placed between the fork crown and the handlebars to raise the bars up 1 " (25mm) and back 1/2 " (12.5mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. Learn More

Moves bars up & back diagonally approximately 2" to unload weight from wrists & forearms and relax the neck. Fits all 7/8" diameter handlebars, but is especially effective for Buells and other bikes with asymmetrical handlebar mounts. Clear anodized finish. Learn More