x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us
Lighting & Visibility

Lighting & Visibility

Lighting & Visibility

Motorcycle Lights & Visibility

Improve your safety margin by increasing your ability to see as well as your being seen with motorcycle light and visibility products from Twisted Throttle. We stock a huge assortment of LED and halogen motorcycle auxiliary driving lights, model specific and universal auxiliary lighting mounts, auxiliary turn signals and tail lights, reflective decal trim kits as well as replacement light bulbs by brands you trust such as Denali, SW-MOTECH, R&G, Barkbusters, Electrical Connection, AdMore Lighting, PIAA, Givi, ReflectGard and Techmount. Our motorcycle light and visibility products will not only help you see what you have been missing on your motorcycle rides, but also improve the chances that others will see you too.

FILTER OPTIONS

Grid List

per page

Items 176 to 210 of 280 total

Page:
  1. 4
  2. 5
  3. 6
  4. 7
  5. 8
  1. DENALI DR1 2.0 LED Light Pod

    DENALI DR1 2.0 LED Light Pod with DataDim Technology

    The DENALI DR1 2.0 LED light pod with DataDim&trade technology was engineered from the ground up to create the brightest, most efficient and durable LED light. Specifically designed for powersports applications to focus on generating the most amount of light with the least amount of power draw from your motorcycle.

    Learn More
    $145.00

  2. DENALI 2.0 Perch Switch Mount Kit

    DENALI 2.0 Perch Switch Mount Kit

    The DENALI 2.0 perch switch mount kit is used to fit the DrySeal waterproof switches to your clutch or brake perch. The kit includes everything needed to mount on M5 and M6 hardware in horizontal or vertical orientation.

    Learn More
    $25.00

  3. DENALI 2.0 Dual Switch Mounting Plate

    DENALI 2.0 Dual Switch Mounting Plate

    The DENALI 2.0 dual switch mounting plate allows two DrySeal™ waterproof switches to be mounted on the same handlebar mounting band.

    Learn More
    $17.00

  4. DENALI 2.0 Sealed Micro Relay

    DENALI 2.0 Sealed Micro Relay

    The Denali 2.0 Sealed Micro Relay is a replacement for the standard DENALI 2.0 Premium 3-pin harness.

    Learn More
    $5.00

  5. R&G Front Indicator Adapters for Suzuki 1000 V-Strom '14-'16 & GSX-S1000FA '15-'18 for use with Micro Indicators

    R&G Front Indicator Adapters for Suzuki 1000 V-Strom '14-'16 & GSX-S1000FA '15-'18 for use with Micro Indicators

    These indicator adapters allow the use of our own micro indicators (RG370) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look. Learn More
    $13.00

  6. DENALI 2.0 Light Harness Extension

    DENALI 2.0 Light Harness Extension

    This DENALI Light Harness Extension can be used to extend the light leads of your DENALI 2.0 Premium 3-pin Harness by 24”

    Learn More
    $14.00

  7. DENALI 2.0 Y-Splitter Kit

    DENALI 2.0 Y-Splitter Kit

    This DENALI Y-Splitter Kit powers two sets of DENALI 2.0 LED lights from one harness! The plug-n-play adapter simply plugs into the end of the DENALI 2.0 Premium 3-pin harness, allowing control of two sets of lights Learn More
    $33.00

  8. Denali Dual DR1 Headlight Conversion Kit for Triumph Bonneville,Thruxton & Scrambler '04-'17 | Includes Turn Signal, Ignition, Rectifier & Horn Relocation Brackets, and DR1 2.0 LED Lighting Kit with Mount

    Denali Dual DR1 Headlight Conversion Kit for Triumph Bonneville,Thruxton & Scrambler '04-'17 | Includes Turn Signal, Ignition, Rectifier & Horn Relocation Brackets, and DR1 2.0 LED Lighting Kit with Mount

    Give the front end of your Triumph Bonneville, Thruxton and or Scrambler a complete make over with the DENALI Dual DR1 Headlight Conversion Kit.  The kit replaces the OEM headlight with two extremely bright DENALI  2.0 DR1 Pods, which shine light an outstanding 1000ft down the road.  Also included in the kit are brackets to relocate the turn signals, ignition, horn and rectifier. The stock turn signals can be reused however it is recommended they are replaced with something more streamline such as the R&G Micro Indicators.
     
    This Headlight Conversion is not DOT approved
    Learn More
    $516.96

  9. SW-MOTECH HAWK Light Mount Set for Kawasaki Versys 650 '15

    SW-MOTECH HAWK Light Mount Set for Kawasaki Versys 650 LT & ABS '15-'17

    These SW-MOTECH HAWK Light Mounts are easy to bolt on, requiring no modifications to your Versys. Lightweight yet sturdy powder coated black steel provides a solid foundation for your auxiliary lighting. The light mounts are recommended for use with HAWK Fog lights and HAWK Spot lights.

    Learn More
    $74.95

  10. DENALI Engine Guard/Frame Auxiliary Light Mount for 32mm-38mm (1.25in-1.5in) Diameter Tubes | Black

    DENALI 32mm-38mm Tube Mount Kit For Mounting Auxiliary Lights To Frame, Fork & Crash Bars | Black

    This DENALI Engine Guard/Frame Light Mount Kit allows fitment of any DENALI LED Light Kit to engine guards, frame tubes, or any tube 32mm-38mm (1.25"-1.5") in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional, fully rotatable mounting shelf to create a super versatile and robust light mounting solution.

    These clamps are intended for mounting lights to OEM or aftermarket engine guards commonly found on cruiser and standard motorcycles. The clamps allow the light to be positioned inside of the engine guards, ensuring they will be protected in a tip over. The clamps are also perfectly sized to fit frame downtubes to achieve a clean, low profile installation on many cruiser and standard motorcycles.

    Learn More
    $77.99

  11. DENALI Engine Guard/Frame Auxiliary Light Mount for 32mm-38mm (1.25in-1.5in) Diameter Tubes | Chrome

    DENALI 32mm-38mm Tube Mount Kit For Mounting Auxiliary Lights To Frame, Fork & Crash Bars | Chrome

    This DENALI Engine Guard/Frame Light Mount Kit allows fitment of any DENALI LED Light Kit to engine guards, frame tubes, or any tube 32mm - 38mm (1.25" - 1.5") in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional, fully rotatable mounting shelf to create a super versatile and robust light mounting solution.

    These clamps are intended for mounting lights to OEM or aftermarket engine guards commonly found on cruiser and standard motorcycles. The clamps allow the light to be positioned inside of the engine guards, ensuring they will be protected in a tip over. The clamps are also perfectly sized to fit frame downtubes to achieve a clean, low profile installation on many cruiser and standard motorcycles. 

    Learn More
    $82.99

  12. DENALI Conventional Fork Tube Auxiliary Light Mount for 39mm - 49mm (1.5in-1.875in) Diameter Tubes | Black

    DENALI 39mm-49mm Tube Mount Kit For Mounting Auxiliary Lights To Conventional Fork Tubes | Black

    This DENALI Fork Tube Light Mount Kit allows fitment of any DENALI LED Light Kit to conventional forks, or any tube 39mm - 49mm (1.5" - 1.875") in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional, fully rotatable mounting shelf to create a super versatile and robust light mounting solution.

    Learn More
    $79.99

  13. DENALI Conventional Fork Tube Auxiliary Light Mount for 39mm-49mm (1.5in - 1.875in) Diameter Tubes | Chrome

    DENALI 39mm-49mm Tube Mount Kit For Mounting Auxiliary Lights To Conventional Fork Tubes | Chrome

    This DENALI Fork Tube Light Mount Kit allows fitment of any DENALI LED Light Kit to conventional forks, or any tube 39 mm - 49 mm (1.5" - 1.875") in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional, fully rotatable mounting shelf to create a super versatile and robust light mounting solution.

    These clamps are intended for motorcycles with conventional forks that have exposed upper fork tubes, like many cruisers and standard motorcycles. The clamps allow the lights to be positioned on each side of the headlight, giving that classic cruiser styling, without a bulky and unsightly light mounting bar.

    Learn More
    $84.99

  14. SALE
    DENALI D2 Dual Intensity LED Lighting Kit with Full Wiring Harness and M8 Mount | Chrome

    DENALI D2 Dual Intensity LED Lighting Kit with Full Wiring Harness and M8 Mount | Chrome

    The unique optic in the D2 light was designed to create a massive beam of light that is the perfect balance between distance and width. You won't believe how much light is produced in front of your bike and on the sides of the road. Consuming only 10 watts of power per lamp, the DENALI D2 lights throw a blazing beam of light 423 feet down the road in front of you. That's 3 times further than your typical motorcycle high beam.

    Dual Intensity Technology

    The DENALI D2 lights are equipped with a dual intensity LED and harness to create the ideal lighting solution for on and off road riders who want an uncompromised beam of light illuminating the road in front of them. These lights are so bright, we developed dual intensity technology so you can use your existing hi/low beam switch to select half intensity brightness when passing oncoming traffic. The lights can also be wired independent of your high/low beam switch to run at full intensity all the time. It's up to you!

    All DENALI LED Lights are housed in a rugged waterproof aluminum housing (submersible up to 3 meters underwater). Our LEDs have an average life span of 50,000 hours, that's 6 years without ever being shut off. Yes we went overboard, It's what we do.

    Making our light kits easy to mount and install on your motorcycle is a top priority for us. Every light kit includes a purpose built motorcycle wiring harness, universal M8 mounting bracket and detailed wiring diagrams that are simple and easy to understand. Bike specific light mounts are also available for many popular bike models.

    Learn More
    $379.99 $274.95

  15. SALE
    DENALI DM Micro Single Intensity LED Lighting Kit with Full Wiring Harness & M8 Mount | Chrome

    DENALI DM Micro Single Intensity LED Lighting Kit with Full Wiring Harness & M8 Mount | Chrome

    The ultra compact size of the DM light is ideal for when you want to maintain a clean inconspicuous look without sacrificing brightness. The DM is also ideal for daytime visibility as the smaller optic intensifies the brightness of light when looking at the light from the front. Consuming only 5 watts of power per lamp, the DENALI DM Lights throw a blazing beam of light 240 feet down the road in front of you. That's 85 feet further than your typical motorcycle high beam.

    All DENALI LED Lights are housed in a rugged waterproof aluminum housing (submersible up to 3 meters underwater). Our LEDs have an average life span of 50,000 hours. That's 6 years without ever being shut off. Yes we went overboard, it's what we do.

    Making our light kits easy to mount and install on your motorcycle is a top priority for us. Every light kit includes a purpose built motorcycle wiring harness, universal M8 mounting bracket and detailed wiring diagrams that are simple and easy to understand. Bike specific light mounts are also available for many popular bike models. 

    Learn More
    $249.99 $179.95

  16. SALE
    DENALI DR1 Single Intensity LED Auxiliary Lighting Kit with Full Wiring Harness & M8 Mount | Chrome

    Denali DR1 Single Intensity LED Auxiliary Lighting Kit with Full Wiring Harness & M8 Mount | Chrome

    The large 10° optic in the DENALI DR1 maximizes the distance you can see down the road by concentrating a spot beam pattern at the center of the road. The DR1 is Ideal fornight riding in on/off road conditions where maximum beam distance is desired. Consuming only 10 watts of power per lamp. The DENALI DR1 Lights throw a blazing beam of light 695 feet down the road. That's over 4 times further than your typical motorcycle high beam.

    All Denali LED lights are housed in a rugged waterproof aluminum housing (submersible up to 3 meters underwater). Our LEDs have an average life span of 50,000 hours, that's 6 years without ever being shut off. Yes we went overboard, it's what we do.

    Want more from your DENALI DR1 Lights? Grab a set of Snap-On Beam Filters to change from spot to a wide flood or elliptical driving beam.

    Making our light kits easy to mount and install on your motorcycle is a top priority for us. Every light kit includes a purpose built motorcycle wiring harness, universal M8 mounting bracket and detailed wiring diagrams that are simple and easy to understand. Bike specific light mounts are also available for many popular bike models.

    Learn More
    $349.99 $249.95

  17. Barkbusters LED Indicator Lights for Jet, Storm & VPS Plastic Handguards | Amber

    Barkbusters LED Indicator Lights for Jet, Storm & VPS Plastic Handguards | Amber

    The Barkbuster LED Indicator Lights for Jet, Storm & VPS Plastic Handguards are designed to increase your visibility using 15 ultra bright LEDs that mount directly to the plastic handguards. Super bright auxiliary signals will make your directional intentions clear to upcoming traffic. The LED indicators are very low draw and E marked for road use. 

    Learn More
    $67.95

  18. Barkbusters LED Indicator Lights for Jet, Storm & VPS Plastic Handguards | White

    Barkbusters LED Indicator Lights for Jet, Storm & VPS Plastic Handguards | Clear

    The Barkbuster LED Indicator Lights for Jet, Storm & VPS Plastic Handguards are designed to increase your visibility using 15 super bright white LEDs that mount directly to the plastic handguards. Super bright auxiliary running lights will make your presence clear to upcoming traffic. The LED indicators are very low draw and E marked for road use.

    Learn More
    $67.95

  19. Barkbusters 10 OHM Resistor set for LED Indicator Lights

    Barkbusters 10 OHM Resistor Set for LED Indicator Lights

    The Barkbusters 10 OHM Resistor Set for LED Indicator Lights will correct the flash rate of your auxiliary signal lights. Ready to plug in connectors make installation a breeze. These resistors are intended for Barkbusters LED Indicator Lights

    Learn More
    $14.95

  20. SW-MOTECH HAWK Light Mount for LED Fog Lights

    SW-MOTECH HAWK Light Mount for LED Fog Lights | For Vertical Mounting

    This SW-MOTECH HAWK Light Mount for LED Fog Lights allows mounting with generic fastenings with M8 boreholes. Each system includes two mounting brackets, spacers, and all necessary screws and washers. This light mount is designed for mounting the lamps vertically for the most powerful and accurate range of illumination.

    Learn More
    $69.95

  21. R&G Front Indicator Adapters for GSX-S1000 '15 (Indicators sold separately)

    R&G Front Indicator Adapters for GSX-S1000 '15-'18 & GSX-S1000 ABS '15-'18 For Use With Micro Indicators

    The R&G Front Indicator Adapters allow the installation of R&G Micro Indicators. Polyethylene plates are designed to fit where the OEM signals previously mounted and provide a secure foundation for the smaller R&G signals. The adapters are sold as a pair. Learn More
    $13.00

  22. SALE
    Givi IN4114KIT Turn Signal Relocation Kit For Kawasaki Versys 650 LT ’15

    Givi IN4114KIT Turn Signal Relocation Kit For Kawasaki Versys 650 '15-'17 & Versys 650 LT ’15-'17

    Givi IN4114KIT Turn Signal Relocation Kit For Kawasaki Versys 650 and 650 LT

    Easily relocate the position of your turn signals with this kit. The Givi IN4114KIT includes everything you need change the position of your rear turn signals so that they are at a more visible location. This kit will install easily with a few simple hand tools, and a few minutes of your time. With this turn signal relocation kit, your Versys 650 carries you luggage and announces your intent to turn plainly.

    Please note: The Givi IN4114KIT can be used with the Givi PL4114 and the Givi PL4114CAM.

    Learn More
    $18.00 $16.20

  23. SALE
    Givi E160 Brake Light Kit For Givi V56 Topcases

    Givi E160 Brake Light Kit For Givi V56 Topcases

    Givi E160 Brake Light Kit For Givi V56 Topcases

    If you’re looking for a way to increase your visibility on the road, then this Givi stop light kit will outfit your Givi V56 topcase with a set of bright incandescent halogens.

    The Givi brake light kit includes all wiring, bulbs, and installation instructions required for you to easily install it in your V56 case. With this kit you can add some extra lighting and step-up the safety of your ride.

    Learn More
    $75.00 $67.50

  24. SALE
    DENALI DM Micro Single Intensity LED Light Pod & M8 Mount | Single Chrome Pod

    DENALI DM Micro LED Light Pod & M8 Mount | Single Chrome Pod

    The ultra compact size of the DM light is ideal for when you want to maintain a clean inconspicuous look without sacrificing brightness. The DM is also ideal for daytime visibility as the smaller optic intensifies the brightness of light when looking at the light from the front. Consuming only 5 watts of power per lamp, the DENALI DM Lights throw a blazing beam of light 240 feet down the road in front of you. That's 85 feet further than your typical motorcycle high beam.

    All DENALI LED Lights are housed in a rugged waterproof aluminum housing (submersible up to 3 meters underwater). Our LEDs have an average life span of 50,000 hours. That's 6 years without ever being shut off. Yes we went overboard, it's what we do.

    Making our lights easy to mount and install on your motorcycle is a top priority for us. Every light includes a universal M8 mounting bracket. Bike specific light mounts are also available for many popular bike models. 

    Learn More
    $104.99 $78.95

  25. SALE
    Denali D2 LED Light Pod with M8 Mount | Single Chrome Pod

    Denali D2 LED Light Pod with M8 Mount | Single Chrome Pod

    The unique optic in the D2 light was designed to create a massive beam of light that is the perfect balance between distance and width. You won't believe how much light is produced in front of your bike and on the sides of the road. Consuming only 10 watts of power per lamp, the DENALI D2 lights throw a blazing beam of light 423 feet down the road in front of you. That's 3 times further than your typical motorcycle high beam.

    All DENALI LED Lights are housed in a rugged waterproof aluminum housing (submersible up to 3 meters underwater). Our LEDs have an average life span of 50,000 hours, that's 6 years without ever being shut off. Yes we went overboard, It's what we do.

    Making our lights easy to mount and install on your motorcycle is a top priority for us. Every light includes a universal M8 mounting bracket. Bike specific light mounts are also available for many popular bike models.

    Learn More
    $147.99 $110.95

  26. SALE
    Denali DR1 LED Light Pod with M8 Mount | Single Chrome Pod

    Denali DR1 LED Light Pod with M8 Mount | Single Chrome Pod

    The large 10° optic in the DENALI DR1 maximizes the distance you can see down the road by concentrating a spot beam pattern at the center of the road. The DR1 is ideal for night riding in on/off road conditions where maximum beam distance is desired. Consuming only 10 watts of power per lamp. The DENALI DR1 Lights throw a blazing beam of light 695 feet down the road. That's over 4 times further than your typical motorcycle high beam.

    All Denali LED lights are housed in a rugged waterproof aluminum housing (submersible up to 3 meters underwater). Our LEDs have an average life span of 50,000 hours, that's 6 years without ever being shut off. Yes we went overboard, it's what we do.

    Want more from your DENALI DR1 Lights? Grab a set of Snap-On Beam Filters to change from spot to a wide flood or elliptical driving beam.

    Making our lights easy to mount and install on your motorcycle is a top priority for us. Every light includes a universal M8 mounting bracket. Bike specific light mounts are also available for many popular bike models.

    Learn More
    $159.99 $111.95

  27. SALE
    Givi Turn Signal Relocation Kit for Honda CB500X '13-'15 | Rear Indicators

    Givi Turn Signal Relocation Kit for Honda CB500X '13-'16 | Rear Indicators

    The Givi turn signal relocation kit moves the rear indicators farther rearward and up from the original location to increase visibility with sidecases mounted. Precisely manufactured bracketry bolts to the bike with no drilling, cutting or other modifications. Enhance safety and ensure your directional intentions are clear to trailing traffic with this handy relocation kit. Learn More
    $30.00 $27.00

  28. Denali Auxiliary Light Mount for Select Kawasaki & Yamaha Star Cruisers | Black (Shown with DENALI DR1 LED Light kit, sold separately)

    DENALI Auxiliary Light Mount for Select Kawasaki & Yamaha Star Cruisers | Black

    Laser-cut from mild steel and powder coated black, these light mounting brackets are both strong and attractive. The kit allows fitment of any Denali LED Lighting Kit to the Kawasaki Vulcan Vaquero, Vulcan voyager, Vulcan 900 & Yamaha/Star 950, 950 Tourer, 1300, 1300 Deluxe, 1300 Tourer. See app chart for specific model years. Learn More
    $75.00

  29. DENALI Auxiliary Light Mount for Select Honda Cruisers | Black

    DENALI Auxiliary Light Mount for Select Honda Cruisers | Black

    Laser-cut from mild steel and powder coated black, these light mounting brackets are both strong and attractive. The kit allows fitment of any Denali LED Lighting Kit to the Honda Interstate, Stateline, Sabre, Shadow RS, Shadow Spirit 750, Shadow Aero and Shadow Phantom. See app chart for specific model years

    Learn More
    $75.00

  30. R&G Front Indicator Adapter Kit For Honda CBR300R ’14-‘16

    R&G Front Indicator Adapter Kit For Honda CBR300R '14-'17

    Grab the R&G Front indicator adapter kit and get rid of those big and bulky OEM signals and replace them with a set of R&G’s micro indicators (RG.RG370, RG.RG371, RG.RG372.BK or RG.RG372.SI).  The R&G Front indicator adapter kit will give your motorcycle a sportier look.

    To ensure a proper flash rate when installing a set of the R&G micro indicators get either the RG.RGR0001 - 9.8 Ohm each or the RG.RGR0002 - 21.5 Ohm each.  These turn signal resistors require no cutting, crimping or soldering. Plug n play!

    Notes:
    If you're replacing original 21 watt turn signals with R&G LED turn signals use resistor RG.RGR0001.

    Learn More
    $13.00

  31. R&G Indicator Adapter Kit For R&G Micro Indicators | Universal Round

    R&G Indicator Adapter Kit For R&G Micro Indicators | Universal Round

    If your motorbike has round stalks for its turn signals and you’re trading those too large OEM indicators for a set of the more streamlined R&G ones; then grab the R&G indicator adapter kit to fill in those left over gaps.  This turn signal adapter kit is universal for motorbikes with round indicator mounting points.  The R&G indicator adapter kit for R&G micro indicators, universal round is compatible with the R&G’s micro indicators (RG.RG370, RG.RG371, RG.RG372.BK or RG.RG372.SI).

    To ensure a proper flash rate when installing a set of the R&G micro indicators get either the RG.RGR0001 - 9.8 Ohm each or the RG.RGR0002 - 21.5 Ohm each. These turn signal resistors require no cutting, crimping or soldering. Plug n play!

    Notes:
    Do not use if you're replacing original LED turn signals with R&G LED turn signals.
    If you're replacing original 21 watt turn signals with R&G LED turn signals use resistor RG.RGR0001.

    Learn More
    $7.42

  32. R&G Front Indicator Adapter Kit For Select Kawasaki Motorcycles

    R&G Indicator Adapter Kit For R&G Micro Indicators For Select Kawasaki Motorcycles

    Easily fill the gaps left over when changing out your larger OEM signals with a set of R&G’s micro indicators (RG.RG370, RG.RG371, RG.RG372.BK or RG.RG372.SI) with the R&G front indicator adapter kit.  This signal adapter set includes four pieces that will fit on most Kawasaki model motorcycles and can be used on both front and rear indicator mounting points.  

    To ensure a proper flash rate when installing a set of the R&G micro indicators get either the RG.RGR0001 - 9.8 Ohm each or the RG.RGR0002 - 21.5 Ohm each.  These turn signal resistors require no cutting, crimping or soldering. Plug n play!

    Technical Notes:
    Do not use if you're replacing original LED turn signals with R&G LED turn signals.
    If you're replacing original 21 watt turn signals with R&G LED turn signals use resistor RG.RGR0001.

    Learn More
    $7.42

  33. R&G Indicator Adapter Kit For R&G Micro For Select Suzuki Motorcycles

    R&G Indicator Adapter Kit For R&G Micro Indicators For Select Suzuki Motorcycles

    If you’re switching your large OEM turn signals out for the R&G micro ones you should grab a R&G indicator adapter kit. These pieces of plastic easily install to your motorcycle to fill in any gaps left after swapping out the original turn signals. This indicator adapter kit is suitable for select Suzuki model motorbikes, and can be used on both the front and rear indicator mounting points with the R&G micro indicators (RG.RG370, RG.RG371, RG.RG372.BK or RG.RG372.SI).

    To ensure a proper flash rate when installing a set of the R&G micro indicators get either the RG.RGR0001 - 9.8 Ohm each or the RG.RGR0002 - 21.5 Ohm each. These turn signal resistors require no cutting, crimping or soldering. Plug n play!

    Learn More
    $7.42

  34. R&G Indicator Adapter Kit For R&G Micro For Select Suzuki Motorcycles

    R&G Indicator Adapter Kit For R&G Micro Indicators For Select Suzuki Motorcycles

    Clean up those gaps left over from removing your original signals and adding the R&G micro indicators with the R&G indicator adapter kit. This indicator kit includes four pieces that are designed to fit select Suzuki motorcycles and can be used on both the front and rear indicator mounting points with the R&G micro indicators (RG.RG370, RG.RG371, RG.RG372.BK or RG.RG372.SI). Grab the R&G indicator adapter kit to finish the job of making your turn signals look sleek and streamlined.

    To ensure a proper flash rate when installing a set of the R&G micro indicators get either the RG.RGR0001 - 9.8 Ohm each or the RG.RGR0002 - 21.5 Ohm each. These turn signal resistors require no cutting, crimping or soldering. Plug n play!

    Learn More
    $7.42

  35. R&G Indicator Adapter Kit For R&G Micro Indicators For Select Yamaha Motorcycles

    R&G Indicator Adapter Kit For R&G Micro Indicators For Select Yamaha Motorcycles

    Grab an R&G indicator adapter kit when replacing those big and bulky OEM turn signals with the smaller and streamlined R&G indicators. The adapter kit will fill in those gaps left over when changing to the smaller signals. This indicator kit includes four pieces that are designed to fit select Yamaha motorcycles and can be used on both the front and rear indicator mounting points with the R&G micro indicators (RG.RG370, RG.RG371, RG.RG372.BK or RG.RG372.SI). To ensure a proper flash rate when installing a set of the R&G micro indicators get either the RG.RGR0001 - 9.8 Ohm each or the RG.RGR0002 - 21.5 Ohm each. These turn signal resistors require no cutting, crimping or soldering.

    Learn More
    $7.42

FILTER OPTIONS

Grid List

per page

Items 176 to 210 of 280 total

Page:
  1. 4
  2. 5
  3. 6
  4. 7
  5. 8