Luggage & Racks

This waterproof welded PVC liner bag has a single large pocket. Even if you leave your hard luggage open during a hurricane or throw your liner bags in a puddle, these liner bags will keep your stuff dry. Learn More

Includes all necessary hardware to mount Trax Alu-Box topcase to a steel toprack. Learn More

This DrySpec Motorcycle Tool Tube Kit attaches directly to the outside of any flat-sided sidecases and can be used to carry our MSR 30 oz. Fuel Bottle and any other gear that can fit inside of it.

Learn More

Adapter kit required for attaching TraX ALU-BOX sidecases to SW-MOTECH Quick-Lock EVO carrier. Includes all hardware required to mount one pair of sidecases to your sideracks. Learn More

Removable quick-release adapter plate for attaching a TraX ALU-BOX topcase to an SW-MOTECH Alu-Rack toprack. Learn More

This waterproof welded PVC liner bag has a single large pocket. Even if you leave your hard luggage open during a hurricane or throw your liner bags in a puddle, these liner bags will keep your stuff dry. Learn More

This pair of Lockable Quick-Locks can be used to replace any one of the standard Quick-Locks found on each sidecarrier. The set includes two matched keys. Helps prevent theft by locking the racks to the bike. Learn More

Includes all necessary hardware to mount Givi Monokey cases to Steel-Racks. Learn More

Includes 6 matching locks, retention clips, and 2 keys for TraX EVO®/TRAX ADV ALU-BOX cases. Learn More

This replacement set of 4 rubber bumpers fits most Givi Monolock and Monokey top plates. Learn More

Includes 4 matching locks, retention clips, key ring and 2 keys for TraX EVO®/TRAX ADV ALU-BOX cases.

Learn More

Constructed from 600-Denier Nylon. Designed to attach to the tie-down points on either 37 or 47-liter TraX EVO® ALU-BOX sidecases. Also fits the TRAX ADVENTURE ALU-BOX sidecases and Givi Trekker Outback sidecases.  Expandable from 8 to 14 liters.

Dimensions:

• 17.25" long x 9" wide x 5" tall
• 17.25" long x 9" wide x 7" tall expanded
• Straps 11" on center
  

Includes: 

• Waterproof liner: 17" x 8.6" x 4.75"/7"

Learn More

Replacement Relay designed to plug right into the existing Denali D1 LED Auxiliary Lighting Harness. Learn More

The quickest, strongest way to mount your RotopaX. Use with included base plate or remove the plate to attach the mount direct by bolting up through the bottom or down through the top. The unique design adds strength and provides extra tightening power. Pack Mounts are milled from solid aluminum then anodized black and finally engraved. This mount uses a 5/16" steel all-thread rod with a steel threaded insert (Helicoil) in the base. Learn More

Passenger backrest made of EPS foam for attachment to 38L TraX® and TraX® EVO ALU-BOXES. Learn More

This GIVI 3-Case Lock Set with 6 Matched Keys includes three lock cylinders to match the keys for three GIVI cases - for example, two side cases and a top case. Learn More

This 'Y' adapter allows you to run two Denali LED pods in place of one. By installing the Y adapters, you could link multiple Denali pods together in a single location.

Learn More

Designed to place on the "other side" of a surface to which you mount the RotopaX Pack Mount as additional support. Powder coated steel backing plate 5.5" round, 16 gauge (.063") thick. Learn More

SW- Motech Drinking Bottle for thirsty people Learn More

Attaches to the existing tie-down points on TraX ALU-BOX sidecases for easy carrying. Learn More

This adjustable shoulder strap attaches to the D-rings on a TraX Nylon Liner Bag. Learn More

SW- Motech Drinking Bottle for thirsty people Learn More

Includes 2 matching locks and 2 keys for TraX EVO®/TRAX ADV ALU-BOX cases. Learn More

Keep the lid for your TraX case supported with these lid stays from SW-MOTECH. These PVC coated, stainless steel cables work with all TraX cases and install with no tools.

Learn More

Nylon Monokey toplate compatible with all F-series Monoracks. Learn More

Includes bottom brakelight connector that attaches to a standard Givi Monokey or Monolock top plate, as well as a wire to attach the connector to your motorcycle's wire harness. Learn More

Already have the GIVI E52 light kit? With the AdMore Lighting LED Kit you can still use the stock "hands-free" connector that came with the original light kit and benefit from the tail light function and much brighter brake lights! Learn More

Universal E-series adapter plate designed to add a Givi Monokey topcase to most existing flat rear luggage racks. Learn More

SW-MOTECH 2 liter plastic auxiliary fluid bottle with screw cap. Constructed from magical German plastic to hold your important liquids. Learn More

Inner bag for Givi E52, E55 & V56 Maxia Topcases Learn More

Fits only Givi V46 and E52 topcases; not for other luggage case models. Keys can only be ordered as blanks and cannot be pre-cut by Givi to specific key numbers. Learn More

Includes top brakelight connector that installs within the bottom shell of your luggage case, as well as a wire to attach the connector to your Givi brakelight. Learn More

Includes 4 tie-down points for TraX ALU-BOX topcase and mounting hardware. Silver. Learn More

Allows you to attach TraX ALU-BOX Sidecases or Micatech V2 Sidecases to GIVI (Monokey system). Attachment to Micatech V2 Sidecases requires separate purchase of a Micatech hardware kit. Learn More