x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us
Chain Oiler Spares & Adapters

Chain Oiler Spares & Adapters

Chain Oiler Spares & Adapters

Find spare tubes, adapters and more for your chain oiler system here.
FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 36 total

Page:
  1. 1
  2. 2
  1. Scottoiler High Temperature Lube Tube Chain Lubricant Reservoir Accessory

    Scottoiler Lube Tube Chain Lubricant Reservoir Accessory | With High Temperature Red Scottoil

    Triple the range of your Scottoiler Chain Oiler with the Scottoiler High Temperature Lube Tube Chain Lubricant Reservoir Accessory. Learn More
    $37.95

  2. Scottoiler Dual Injector Chain Lubricant Dispenser Accessory

    Scottoiler Dual Injector Chain Lubricant Dispenser Accessory

    Improve the efficiency of your Scottoiler Chain Oiler by flowing oil to both sides of the rear sprocket and chain of your motorcycle with the Scottoiler Dual Injector Chain Lubricant Dispenser Accessory. Learn More
    $34.95

  3. Scottoiler Lube Tube Chain Lubricant Reservoir Accessory

    Scottoiler Lube Tube Chain Lubricant Reservoir Accessory | With Traditional Blue Scottoil

    Triple the range of your Scottoiler Chain Oiler with the Scottoiler Lube Tube Chain Lubricant Reservoir Accessory. Learn More
    $41.95

  4. Scottoiler Universal Spigot Assembly For Select BMW, Honda, Husqvarna, MZ & Suzuki Motorcycles

    Scottoiler Universal Spigot Assembly For Select BMW, Honda, Husqvarna, MZ & Suzuki Motorcycle Models

    The Scottoiler universal spigot assembly is an auxiliary vacuum port for installation on motorcycles without an original vacuum connection which makes use of the vSystem automatic chain oiler possible. Without a factory vacuum connection the only other option would be to install the eSystem electronic chain oiler that is significantly more expensive. This handy universal spigot makes it possible (with modification) to use the vSystem on any motorcycle regardless of a factory equipped vacuum port! Professional installation is recommended but not required and it's a more affordable option when trying to fit an automatic chain oiler. Add the universal spigot assembly to your Scottoiler vSystem installation and ride off into the sunset perfectly lubricated!

    Learn More
    $9.95

  5. Scottoiler Vacuum Damper Assembly (With Filter) For Select Kawasaki, Triumph & Yamaha Motorcycles | 6mm

    Scottoiler Vacuum Damper Assembly (With Filter) For Select Kawasaki, Triumph & Yamaha Motorcycle Models | 6mm

    This replacement part is made for the Scottoiler vacuum operated vSystem. This elbow shaped piece connects your Scottoiler vacuum tubing to the engine vacuum and comes with a filter that stabilizes the vacuum and keeps the system clean. By damping the vacuum pulses the Scottoiler systems will not be affected by subtle pressure fluctuations. This Scottoiler vacuum damper assembly can be combined with a vacuum take-off point lager than the standard 4mm diameter. Learn More
    $5.95

  6. Scottoiler M6 Brass Screw-In Spigot

    Scottoiler M6 Brass Screw-In Spigot

    The Scottoiler M6 Brass Screw-In Spigot provides a vacuum port to connect and operate the vSystem chain oiler on motorcycles without an original vacuum connection. Use this spigot to tap into the engine vacuum on motorcycles where an M6 threaded hole exists. To install, simply screw this piece into the vacuum hole and use a small amount of sealant to achieve an airtight seal. The vacuum connection is now made and you’re ready to go.

    If you are moving your vSystem from one motorcycle to another, it is recommended that you purchase another Scottoiler M6 brass screw-in spigot.

    Learn More
    $4.95

  7. Scottoiler Breather Assembly With Male Luer

    Scottoiler Breather Assembly With Male Luer

    The Scottoiler breather assembly with male luer attaches to the oil reservoir. This piece is crafted using a clear PVC tube with a black plastic luer (spigot) on one end and a breather filter on the other.

    The breather assembly has a male luer which connects into the filler plug, allowing the system to breathe. As the oil in the reservoir level goes down, air is drawn in to replace it. Scottoiler includes a filter to prevent dirt and dust particles from getting into your vSystem or eSystem.

    Learn More
    $8.95

  8. Scottoiler Dispenser Adapter Kit SA-0091BL for select Ducati Scrambler models

    Scottoiler Dispenser Adapter Kit SA-0091BL for select Ducati Scrambler models

    Fit a Scottoiler to your Ducati Scrambler with a SA-0091BL Dispenser Adapter Kit. Allows mounting of standard dispenser to your motorcycle's swingarm. Learn More
    $14.95

  9. Scottoiler European Adaptor

    Scottoiler European Adapter Kit for Euro Spec BMW F650GS Twin '08-'12, F700GS '13-'16 & F800GS '08-'16

    The Scottoiler European Adapter Kit is required to complete the installation of the vSystem automatic chain oiler on European versions of the BMW F650GS & F800GS Twin & F700GS. The airbox connections are slightly different than those of motorcycles built for the U.S and this component ensures proper fitment without the need for modifications. If you plan to install the Scottoiler vSystem on your European BMW, pick up one of these adapters and make the installation a no brainer!

    Learn More
    $9.95

  10. Scottoiler Tee Connector, Natural Nylon | 4mm

    Scottoiler Tee Connector, Natural Nylon | 4mm

    Easily re-connect your Scottoiler vSystem to your motorcycles vacuum with the Scottoiler tee connector. This replacement piece is manufactured out of natural nylon and is specifically made for motorbikes with 4mm vacuum piping. Simply cut the vacuum pipes and insert the tee piece and then attach the shorter 3rd arm to the Scottoiler unit. This piece is included with the Scottoiler standard universal vSystem. Learn More
    $3.95

  11. Scottoiler Dual Lock - 2 Pieces

    Scottoiler Dual Lock - 2 Pieces

    The Scottoiler Dual Lock velcro has excellent adhesion properties and provides a secure hold for the eSystem display unit. To install, simply peel off the backing and stick one pad to the electronic component and the other to a flat surface on your motorcycle. Attach the electronic display unit to the corresponding velcro piece and you're ready to go.

    Dual Lock is often used by motorbike manufacturers to secure fairing panels. This industrial grade velcro is super strong. If you are changing motorcycles it is recommended that you get new Dual Lock pieces to establish a strong connection.

    Learn More
    $9.95

  12. Scottoiler Reservoir Cage

    Scottoiler Reservoir Cage

    The Scottoiler reservoir cage provides a secure mounting solution and protection for the reservoir unit. This component also allows for a neat and tidy mounting solution to your motorcycle's frame (or anywhere else) it can be neatly attached with tie wraps. Along the underside of the cage is a series of cable tie routing channels, for super easy installation. Inside and outside of the holder comes complete with rubber securing strips. Learn More
    $11.95

  13. Scottoiler RMV Bolt-On Clamp Set Assembly For 6mm Holes

    Scottoiler RMV Bolt-On Clamp Set Assembly For 6mm Holes

    Use the Scottoiler RMV bolt-on clamp set assembly to attach your Scottoiler reservoir on your motorcycle where a 6mm diameter hole is available. This durable clamp uses two slightly different sized mounting rings that securely hold your Reservoir Metering Valve in one direction only. Add a Scottoiler vSystem or eSystem to your motorcycle for the best automatic chain oiling on the market. Learn More
    $20.95

  14. Scottoiler eSystem REP

    Scottoiler eSystem REP

    The Scottoiler eSystem REP is one of the most important components of the electronic chain oiler. The Reservoir Electronic Pump provides the pumping action that forces the oil from the reservoir. The REP works in conjunction with the display unit which provides the sensing and control of the eSystem. This unit is a direct replacement for the pump that came with your Scottoiler Electronic Automatic Chain Oiler. Learn More
    $232.95

  15. Scottoiler Dispenser Plate (Small) | 10mm

    Scottoiler Dispenser Plate (Small) | 10mm

    This Scottoiler dispenser plate (small) 10mm is a replacement piece. The part is designed to securely hold the injector nib so it touches the face of the sprocket. This little component operates in some harsh environmental conditions. If the dispenser plate gets damaged, replace it with a genuine Scottoiler part.

    Learn More
    $4.95

  16. Scottoiler Delivery Tubing | Clear PVC - 3m

    Scottoiler Delivery Tubing | Clear PVC - 3m

    Use this Scottoiler delivery tubing when extending or changing the existing dispenser route or moving your automatic chain oiler to another motorcycle. The tube is manufactured using clear PVC, so you can see the Scottoil inside. This tubing conveys the oil to the injector unit and withstands road and trail conditions. Learn More
    $9.95

  17. Scottoiler Tee Connector With Viton For Select Triumph Model Motorcycles | 8mm

    Scottoiler Tee Connector With Viton For Select Triumph Motorcycle Models | 8mm

    The Scottoiler Tee connector with Viton is used for Triumph motorcycle models that have corrugated vacuum pipes. Scottoiler uses Viton in the construction of the T-piece because it will resist heat up to 400° F and wards against oxidation, ozone, UV exposure, weather, fungus, and mold, ensuring a secure seal.

    Installation is super simple. Just cut the vacuum pipe and slide the T-piece over the outer of the corrugated pipes to re-join the severed ends. The white leg then connects your vacuum damper attached to the vacuum tube from the reservoir. Install a Scottoiler vSystem on your motorcycle and receive the best automatic oiling of your chain and sprocket on the market.

    Learn More
    $25.95

  18. Scottoiler Dual Injector Replacement Injector Assembly | 55mm

    Scottoiler Dual Injector Replacement Assembly | 55mm

    The Scottoiler dual injector assembly is designed to be worn down by your motorcycle's chain and sprockets. This important part also acts as failsafe by preserving the dual injector body in the event of a failure. The pair of nibs on the part are 55mm long and allow your Scottoiler system supply lubricant to both sides of your sprocket, providing optimum oil distribution. When you need to replace the dual injector assembly be sure to grab this genuine Scottoiler replacement part.

    The Scottoiler replacement injector assembly also comes in a 75mm length (SCT.SA-0171BL).

    Learn More
    $10.95

  19. Scottoiler Injection Tubes - Pair

    Scottoiler Injection Tubes - Pair

    This pair of replacement Scottoiler injector tubes will replace old, worn or broken ones. The Scottoiler tubes are designed as a failsafe for the unit by easily breaking off if snagged on either the chain or sprocket. These tubes will work with both of the Scottoiler vSystems or eSystems. Grab a set of Scottoiler replacement injector tubes to bring your dispenser back to full working order. Learn More
    $5.95 $4.45

  20. Scottoiler Dispenser Adapter Kit For Select Kawasaki Motorcycles

    Scottoiler Dispenser Adapter Kit SA-0093BL For Select Kawasaki Motorcycle Models

    The Scottoiler dispenser adapter kit will provide you with a neat and tidy setup for your Scottoiler unit on your Kawasaki motorcycle. Included in this kit are all the pieces necessary to install the dispenser. This is a replacement kit and contains the same pieces that came with your Scottoiler vSystem. Learn More
    $8.95 $5.41

  21. Scottoiler Vacuum Damper Assembly (With Filter)

    Scottoiler Vacuum Damper Assembly (With Filter)

    The Scottoiler vacuum damper assembly (with filter) is made for the vSystem. This elbow shaped piece of plastic will fit onto the engine, manifold, EVAP, throttle body or carb vacuum take off (location is motorcycle model dependant). The assembly comes complete with a filter that will help stabilize the vacuum and keep the system clean. By damping the vacuum pulses the Scottoiler vSystem will not be affected by subtle pressure fluctuations. This component comes in handy when you are moving the automatic chain oiling system from one motorcycle to another. For hassle free installation, apply a small amount of oil on the SA-0100BL.

    The vacuum damper assembly is made of flexible plastic. Over time (like 10+ years) it can harden. If you are moving the kit from one motorbike bike to another, we recommend you replace this part. This component is crucial to get an airtight seal on the engine.

    Learn More
    $4.95

  22. Scottoiler Dispenser Adapter Kit SA-0615BL for BMW F800R models

    Scottoiler Dispenser Adapter Kit SA-0615BL for BMW F800R models

    Fit a Scottoiler to your BMW F800R with a SA-0615BL Dispenser Adapter Kit. Allows mounting of standard dispenser to the M6 threaded chain guard mount on your motorcycle's swingarm. Learn More
    $10.95

  23. Scottoiler Tee Connector For Select Aprilia & Triumph Motorcycles | 8mm

    Scottoiler Tee Connector For Select Aprilia & Triumph Motorcycle Models | 8mm

    Discover how easily the Scottoiler Tee connector attaches your 8mm internal diameter pipes to the Scottoiler vSystem. To install, simply cut your vacuum pipe and insert the tee piece to re-connect the two pieces. The shorter leg then connects to the vacuum damper attached to the vacuum tube from the reservoir. This tee connector is a replacement piece for the one that originally came with your Scottoiler vSystem. Learn More
    $5.95

  24. Scottoiler Dispenser Assembly For Select Ducati Motorcycles

    Scottoiler Dispenser Assembly Kit SA-0026BL For Select Ducati Motorcycle Models

    This Scottoiler dispenser assembly is meant to keep as a spare in your toolbox and replace the original if it got damaged. The assembly enables neat and tidy installation of the dispenser unit. You will receive enough oil delivery tubing to ensure proper installation. This adapter is made for Ducati single-sided swingarms where access is difficult. Learn More
    $18.95 $13.01

  25. :  Scottoiler Filler Plug With Female Luer

    Scottoiler Filler Plug With Female Luer Connection

    The Scottoiler filler plug with female luer provides a seal against the elements and a connection for priming the system. This piece sits inside the filling hole in the oil reservoir recess. The filler plug with female luer allows the RMV to breathe. This replacement piece connects to either the breather assembly in normal use, the lube tube, touring kit or the filling spout on the oil during priming of the system. To refill your reservoir remove the oil filler plug.

    The flexible rubber plug can harden over time (10+ years) and it is recommended that you replace it with a genuine Scottoiler filler plug with female luer, especially if you are changing the vSystem from one motorcycle to another.

    Learn More
    $6.95

  26. Scottoiler Stainless Steel Dispenser Plate Clip

    Scottoiler Stainless Steel Dispenser Plate Clip

    The Scottoiler stainless steel dispenser plate clip is a replacement part manufactured to keep your vSystem in tip top shape. This corrosion resistant and sturdy piece is a very important component of the automatic chain oiler system. The clip is designed to hold the injector nib securely to the dispenser plate so it makes contact with the face of the sprocket, ensuring proper lubrication. When the dispenser plate clip needs to be replaced after riding through many kinds of harsh environments or you are changing motorcycles, be sure to get this genuine Scottoiler replacement. Learn More
    $4.95

  27. Scottoiler M5 Brass Screw-In Spigot

    Scottoiler M5 Brass Screw-In Spigot

    This Scottoiler M5 brass screw-in spigot provides an auxiliary vacuum outlet to connect and operate the vSystem automatic chain oiler. To install this component use a small amount of sealant to achieve an airtight seal. This spigot taps into your motorcycle's engine vacuum where an M5 threaded hole exists.

    Are you transferring your Scottoiler vSystem from one motorcycle to another? If you are it is recommended that you purchase this replacement M5 brass screw-in spigot.

    Learn More
    $4.95

  28. Scottoiler eSystem Check Valve Assembly

    Scottoiler eSystem Check Valve Assembly

    The Scottoiler eSystem check valve assembly will keep the oil from moving down along the feed tube when your motorcycle is not moving. This lets the oiling system to operate only while you're riding. Without this necessary component, your electronic automatic chain oiler will be siphoned out of oil thanks to atmospheric pressure.

    When installing a Scottoiler system check valve assembly please ensure that it is oriented correctly. There is an arrow marked on the valve to make this easy.

    Here's a little tip. To speed up priming the system, remove the check valve assembly and connect the feed tube directly to the reservoir.

    Learn More
    $18.95 $9.45

  29. Scottoiler Vacuum Tubing | Black - 2m

    Scottoiler Vacuum Tubing | Black Nylon - 2m

    The Scottoiler vacuum tubing is manufactured using a high-quality fuel resistant nylon to ensure safety. This material can easily be cut with a sharp knife to get the required length (smaller sections make replacement injector nibs). The tubing is used in the installation process of a Scottoiler vSystem to make the connection between the reservoir and your motorcycle's engine vacuum.

    For easy attachment, apply a small amount of oil on the SC-0051BL. If the tubing on your automatic chain oiler happens to get damaged or you are moving the system to another motorcycle, grab some new Scottoiler vacuum tubing.

    Learn More
    $7.95

  30. :  Scottoiler Reservoir Metering Valve (RMV) For vSystems
    $74.95

  31. Scottoiler Self Adhesive Cable Clips | Pair
    $4.95

  32. Scottoiler Dispenser Adapter For Eccentric Adjuster Models (CAM)
    $8.95

  33. Scottoiler Lube Tube Body Assembly
    $53.95 $38.95

  34. Scottoiler Dispenser Adapter Kit SA-0620BL for KTM models
    $4.45

  35. Scottoiler Dispenser Adapter Kit SA-0625BL for BMW S1000R & S1000RR models

    Scottoiler Dispenser Adapter Kit SA-0625BL for BMW S1000R & S1000RR models

    Fit a Scottoiler to your BMW S1000R or S1000RR with a SA-0625BL Dispenser Adapter Kit. Allows mounting of standard dispenser to the M8 threaded paddock bobbin mounts integrated in your motorcycle's swingarm. Learn More
    $6.95

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 36 total

Page:
  1. 1
  2. 2
Chat with us!