Cart - $0.00

You have no items in your shopping cart.

YouTube Facebook Twitter 855-255-5550 Email Us

SW-MOTECH aluminum engine guard/skidplate Yamaha FZ-09 '14-'16

SKU: MSS.06.471.10000B

Limited stock

Only 5 left


Constructed of a 4mm-thick aluminum base plate and 3mm-thick side plates for heavy-duty, light-weight protection. Where the base plates and side plates overlap, it forms a riveted 7mm-thick rail for extra rigidity. Base plate includes side protectors that wrap around the engine block to provide both bottom and side protection.

There are 4 brackets and 8 mounting bolts to help distribute the force of an impact over a larger area. Also designed into this skidplate are rubber dampeners in key locations that further distribute the load. No cutting or drilling required. All mounting hardware included.

The Pyramid Plastics Fenda Extenda for the front fender cannot be used on this motorcycle if the SW-MOTECH skidplate is installed because the products occupy the same physical space when the suspension is fully compressed.

Note: May not work with aftermarket exhaust systems.

Customer Reviews
Review by Helene
I returned mine. The plate blocks the drain bolt and either you have to modify the plate to have a "hole" or you have to remove the skid plate each time you have to change the oil. (Posted on 9/20/15)
Review by alnbama
This is a three piece guard/skid plate. A mount that connect to the bottom of the engine, and a two piece plate that mounts to the base mount. The plate is almost unnoticed from the side of the bike. It appears that it will provide good protection to the drain plug area of the motor. The only down side is that the complete guard will have to be removed for an oil change. (Posted on 2/14/15)
Review by motorock
Have had it for about 3 weeks. It was very easy to install once I was able to unscrew all the bolts off the bike. It fits like a glove, and protects the entire underbelly of the bike, especially that oil drain plug- gives me peace of mind knowing that oil is not going to gush out if I do manage to hit the underside on the road/sidewalk/stone etc. Also, it really looks well finished and gels with the lines of the bike. (Posted on 1/24/15)
Write Your Own Review

Only registered users can write reviews. Please, log in or register