Cart - $0.00

You have no items in your shopping cart.

YouTube Facebook Twitter 855-255-5550 Email Us

SW-MOTECH Bags-Connection Blaze Sport Saddlebag System for Yamaha YZF R1 '09-'14

SKU: HTA.06.740.10000

Limited stock

Only 1 left


The SW-MOTECH Bags-Connection Blaze Sport Saddlebag System offers an innovative way to mount soft saddlebags onto sport-style motorcycles. The system features mounting arms that quickly attach to the motorcycle and then slip into channels located on the backside of each bag. These arms ease installation and support the bags to prevent side-to-side movement and potential contact with the exhaust or rear tire. The mounting arms detach quickly to retain the stock look of the motorcycle when the bags are removed. The SW-MOTECH Bags-Connection Blaze Sport Saddlebags feature durable YKK RC-Fuse zippers and are expandable from 14 to 21 liters per bag.


  • Made from high quality 1680 ballistic nylon
  • Volume 14-21 liters per saddlebag
  • Solid panniers prevent contact between saddlebags and tires
  • Quick lock pannier bracket
  • Main compartment with top loading function and outside pocket with side loading function
  • Reflective trim
  • RC-Fuse Zippers (RC-Fuse Video)
  • 2 Year warranty

Included accessories:

  • Mounting hardware
  • Waterproof inner bags

Watch the video below for step-by-step instructions on how the Sport Panniers system works.


Special Note: This product was designed for use with the original exhaust system (OEM). Any damage resulting from use in combination with a non-OEM exhaust systems is not covered by the manufacturer warranty.

Customer Reviews
Review by Superfunkomatic
Bought these awhile ago and finally installed them. Instructions aren't the best, but work. Bags are excellent quality and fit is perfect with my stock mufflers (gutted and race-baffled). Smaller aftermarket cans probably wouldn't fit as well. The side rails would not stay clamped into the plastic quick release mechanism, with provided bolts alone. There is a place between the two clamping bolts to add a sheet metal screw or rivet. I drilled a hole in each rail and installed a washer and pop-rivet, to prevent any possibility of rails pulling out. They should come from factory with holes drilled and screws provided. Be sure to use green loctite on all bolts that clamp plastic, since it will cold-flow and loosen over time. (Posted on 8/29/15)
Write Your Own Review

Only registered users can write reviews. Please, log in or register