Note: The SW-MOTECH Black & Silver aluminum engine guard skidplate for Kawasaki KLR650 '08-'15 is no longer able to be ordered in the USA but is available in Canada. Please use the toggle button on the upper right of your screen to switch to our Canadian website.Constructed of a 4mm-thick aluminum base plate and 3mm-thick side plates for heavy-duty, light-weight protection. Where the base plates and side plates overlap, it forms a riveted 7mm-thick rail for extra rigidity. Base plate includes side protectors that wrap around the engine block to provide both bottom and side protection. Now available in a 2 tone black & silver finish.
Special Note: This Skid Plate is compatible with the earlier style Crashbars SBL.08.297.10000 & SBL.08.297.10001 which mount to the footpeg mounts but is NOT compatible with the revised Crashbars SBL.08.297.10002 which clamp to the frame instead. If you have or plan to order the revised Crashbars SBL.08.297.10002, please order SW-MOTECH Skid Plate MSS0846910000. If you are not sure which version your have, please contact our Customer Service at 855-255-5550 and we will be glad to help.
This item will also fit the KLR650 '87-'07 WITHOUT SW-MOTECH Crash Bars. If you plan to install both the crashbars and the skidplate please use part # MSS.08.347.100 for the '87-'07 models only.
Kawasaki KLR 650E Skidplate overview video:
Video review of the SW-MOTECH Kawasaki KLR 650 Demo Bike:
All hardware needed to mount the skidplate is included. Typically installs using basic hand tools. No welding, cutting, or drilling of existing frame or body parts required. Designed to work with OEM components -- we cannot assure fit with aftermarket exhausts or other accessories.
The infamous KLR650 "Doohickey" (the left-side balancer chain tension adjuster) is accessible with the skidplate installed.
The skidplate's front mounting point is hinged so that the skidplate can be pivoted out of the way after releasing the two rear skidplate mount bolts. This makes maintenance and oil changes much faster than with our competitor's non-hinged skidplates.
Designed by Twisted Throttle and produced exclusively for Twisted Throttle by SW-MOTECH.
Special Note: This skid plate CAN be installed WITH Givi TN421 crashbars by using 2 spacers of a reduced thickness of 2mm each on the front bracket. This is number 5 in the parts list of the installation guide at the bottom of this page. If you are handy and can remove 2mm from the existing spacers or can get your hands on 2 spacers with these dimensions: OD: 20, ID: 8.2, H: 14, then you are ready to go.
KLR 650 Crash Protection Fitment Compatibility
|KLR 650 '08-'17||Crash Bars||Skid Plate||Center Stand|
|KLR 650 '86-'07||Crash Bars||Skid Plate||Center Stand|
|Crash Bars||SBL.08274.100||Yes||Yes||Yes||Yes(W/ HW)*|
|Center Stand||HPS.08.321.100||Yes(W/ HW)*||Yes (W/ HW)*||Yes||Yes||Yes||Yes|
**(W/ HW)** With HardWare kit (Free)
- Review by steve
- Review by Sheepdog
- Review by thebaldguy
- Review by Lenny
- Review by Garrett