CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us

SW-MOTECH EVO 2.0 12-volt Electric QUICK-LOCK Top Ring Upgrade Kit for SW-MOTECH EVO Tank bag Mounting Systems

SW-MOTECH EVO 2.0 12-volt Electric QUICK-LOCK Top Ring Upgrade Kit for SW-MOTECH EVO Tank bag Mounting Systems

$141.95
SKU: TRE.00.640.10203.B

Out of stock but more due on Oct 20, 2017. Order now for fastest delivery.

Email me when back in stock

 

Email Me When Back In Stock

Enter your email below and we'll notify you when it is back in stock.


 

Provide a 12 volt power supply to the inside your EVO Tank Bag with the SW-MOTECH EVO 2.0 12-volt Electric QUICK-LOCK Top Ring Upgrade Kit. Compatible with most EVO tank rings, this kit is designed to replace the standard top ring that came with your tankbag to provide a quickly detachable and clean power supply to its interior. Power running to the tank ring is controlled by a switch on the main power supply cable that detects when the bag is mounted and removes power to the tank ring mounted T-connector when the bag is removed. This means you never have to worry about unsightly dangling wires or the hassle of unplugging devices. Installation is simple, a drill bit, template, hex key and torx bit are included to allow you to swap out your existing top ring or make a fresh install on a new bag as well as connect the SAE supplied power cable to feed your devices. A switched and fused main power supply connects directly to the battery and plugs into a T-connector that attached to your existing EVO tank ring. This T-connector allows power to pass through the ring when the bag is mounted and provides a clean look when it is is detached. Since there is a small draw on the power switch while the bag mounted, we recommend removing your tank bag from your motorcycle when it will sit for long periods of time or overnight. Keep your smartphone and other gadgets powered up, handy, and out of sight with the EVO 2.0 12-volt electric top ring upgrade kit by SW-MOTECH.

Features:

  • Replaces standard Top Ring on SW-MOTECH EVO Tank Bags
  • Compatible with most SW-MOTECH EVO Tank Rings
  • Enables detachable and clean 12 volt power supply to inside of Tank Bag
  • Allows power to Top Ring only when Tank Bag is seated
  • 5amp maximum operating load
  • Wires directly to battery
  • Inline 5amp fuse
  • Gold plated vibration proof contacts
  • Waterproof harness connection
  • Black base with red clamps

Includes:

  • EVO 2.0 Electric Top Ring
  • Tank ring base T-connector power harness
  • Battery connection power supply cable
  • Top ring power supply cable with SAE connection
  • Mounting hardware
  • 5 aluminum mounting rings
  • Drill template
  • 8.5mm drill bit
  • T6 torx bit
  • 3mm Hex key
  • Installation instructions

 


Attention: The SW-MOTECH EVO 2.0 12-volt Electric QUICK-LOCK Top Ring supplied in this kit is compatible only with EVO 2.0 main power supply cable and T-connector supplied with the EVO 2.0 top rings. Use with the wiring harness & T-connector of previous EVO 12-volt Top Rings is not possible.

SW-MOTECH EVO 2.0 and EVO Top Ring Guide
SW-MOTECH EVO 2.0 and the previous EVO 12-volt top rings are not compatible with each other due to differences in the T-connector that mounts on the tank ring as well as the switch pickup in the top rings. Motorcycles that have the T-connector from previous generation EVO 12-volt top ring kits will have to install the new power supply cable and T-connector that is supplied with the EVO 2.0 12-volt kit.
EVO 2.0 and EVO Top Ring Differences
Use the images below to determine if your existing top ring is EVO 2.0 or EVO.
SW-MOTECH EVO 2.0 Top Ring SW-MOTECH EVO 2.0 T-Connector SW-MOTECH EVO Top Ring SW-MOTECH EVO T-Connector
EVO 2.0 Top Ring
The EVO 2.0 Top Ring has red clamps
EVO 2.0 T-Connector
The EVO 2.0 T-Connector has no visible screws

EVO Top Ring
The EVO Top Ring has black clamps

EVO T-Connector
The EVO 2.0 T-Connector has two visible screws
If you already have an SW-MOTECH EVO 12-volt Tank Bag and you wish to use it with the EVO 2.0 T-connector and power supply, you will need to purchase an SW-MOTECH EVO 2.0 12-volt Top Ring Kit to retrofit the EVO tank bag.

Although SW-MOTECH EVO 2.0 12-volt Electric QUICK-LOCK Top Rings are compatible with most EVO tank rings, they are not compatible with the following:

 


Write Your Own Review

Only registered users can write reviews. Please, log in or register