This accessory mount uses existing windscreen mounting points to provide a secure, flat mounting surface with an adjustable viewing angle and height. The 8 pre-drilled M6 mounting holes allow easy direct attachment of your motorcycle accessories. Pre-drilled holes are perfectly positioned to attach any RAM-B-238-compatible RAM mounts (sold separately) OR a TomTom Rider GPS.Originally designed to allow easy, direct attachment of a Garmin Zumo 450, Zumo 550 to the Suzuki V-Strom. Additionally attaches the Garmin 2600 or 2700-series GPS units (using several RAM components) to the V-Strom, but also works with many other electronics..
Not compatible with 2002-2003 DL1000 V-Strom.
Will accept the cradle from Garmin Zumo 660 and 665 with the optional SW-MOTECH GPS Adapter Kit for the Garmin Zumo 660/665.
RAM-B-238 NOT necessary to attach the RAM mounts for a Garmin 2600/2700-series GPS to this mount. The RAM-B-238 should NOT be used to add arms to the mount platform, as excessive vibration may occur.
No modification of this mount is needed for the 76 series, 176 series, 2610 series or the II & III series Mounts.
An additional hole is pre-drilled in this mount when used with with the ram holders for the Garmin Etrex, Garmin Quest, Garmin 60 Series, and other RAM GPS mounts that have a 45 degree offset mounting position.
According to RagnCajn of Stromtrooper.com, the SW-MOTECH gadget mount can be combined with the Madstad windshield mount. Here's an excerpt from his February 2008 comments:
With the GPS cradle installed, you can still access Madstad knobs. It is tight with the GPS in the cradle, but my hands can fit. With the GPS out, it is no problem. There is no interference from the bracket at all. The only time I think there may be the slightest contact is if you bring the bracket to it's highest position and full-tilt back towards the rider.
The past month, more people than I can count have stopped and commented on how cool of a setup it is. I'd have to agree. Not taking your eyes off the road, or scanning from gauges to GPS to road is extremely comfortable.
It is a great setup. I'd highly recommend it.
This item replaces the older GPS.05.013.100 that was not vibration damped.
Check out the totally Twisted Suzuki DL650 which is outfitted with this Twisted component
Installation Note: When used in conjunction with a MadStad Adjustable Windshield Mount (Suzuki DL650 & DL1000 V-Strom, '04-'11) discard the spacers in the GPS Holder kit. Special Thanks for this information go out to Eric Y and his detailed installation instructions found on Stromtrooper.com
Confuzzled on how to separate the two pieces in the kit? Watch the video below!
- Review by alonsosanchez20
- Review by Steve