Product Listings

Fenda Extenda fender extensions are manufactured by Pyramid Plastics and attach to your bike's original fender by drilling four holes in the guard and using the screws provided. They fit neatly onto the mudguard to provide extra protection for the radiator and engine from road grit and gravel kicked up by the front tire.

These footpeg clamps allow you to attach MFW Footpegs to crashbars with a diameter from 0.85" (21mm) to 1.125" (28mm), including all SW-MOTECH and Givi crashbars. Sold in pairs.

Galfer stainless steel brake lines greatly improve braking effectiveness! Stock lines are typically made from rubber that expands when the brakes are applied. Steel braided lines are designed to minimize expansion under pressure, which provides a firm, consistent feel at the rear brake pedal for improved feedback and control. Less expansion also means that less lever force is required to achieve maximum braking for reduced braking distances.

Galfer stainless steel brake lines greatly improve braking effectiveness! Stock lines are typically made from rubber that expands when the brakes are applied. Steel braided lines are designed to minimize expansion under pressure, which provides a firm, consistent feel at the rear brake pedal for improved feedback and control. Less expansion also means that less lever force is required to achieve maximum braking for reduced braking distances.

Galfer stainless steel brake lines greatly improve braking effectiveness! Stock lines are typically made from rubber that expands when the brakes are applied. Steel braided lines are designed to minimize expansion under pressure, which provides a firm, consistent feel at the rear brake pedal for improved feedback and control. Less expansion also means that less lever force is required to achieve maximum braking for reduced braking distances.

Galfer stainless steel brake lines greatly improve braking effectiveness! Stock lines are typically made from rubber that expands when the brakes are applied. Steel braided lines are designed to minimize expansion under pressure, which provides a firm, consistent feel at the rear brake pedal for improved feedback and control. Less expansion also means that less lever force is required to achieve maximum braking for reduced braking distances.

Do it all with the rugged, waterproof, multi-mode nüvi 550. Drive, hike, bike or boat — this dynamic device switches modes to navigate your active lifestyle. It's packed with detailed street maps for North America or Europe and millions of places. Like the 500, nüvi 550 provides spoken turn-by-turn directions to your destination and accepts optional maps for any adventure.

Take a ride on a new route and explore the open road with the zūmo 665, a motorcycle-friendly navigator with stereo Bluetooth® and XM® satellite radio, weather and traffic. Whether you’re on a weekday ride just across town or a week long trip to an annual rally with friends, the zūmo 665 is ready to show you the way.

This stylish, well-constructed replacement windscreen features improved height and shape with top-notch quality. Mounts in minutes using stock fasteners. Features clear tint and precision-cut shape. Overall height is 29.5" (750mm); maximum width is 23.6" (600mm), approximately 4 inches (10cm) taller than the original screen. Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 90 cm (12 cm of extension) width 58 cm

Givi crashbars are designed to protect the engine in the event of a tip over or mild crash. Constructed of 1" diameter mild steel, black finish.

This E-series model-specific adapter plate is designed to add a Givi Monokey case to your existing OEM toprack or tailsection (model-dependent). Depending on the model, the adapter plate may be cast aluminum or durable molded nylon. Rugged black finish. All necessary mounting hardware and installation diagram included.

These model-specific tubular sideracks are designed to provide a more unobtrusive mounting solution for the Givi Monokey sidecases. These sideracks are custom designed for select individual motorcycle models. The sleek design and integrated look helps to maintain the narrowest possible profile for your motorcycle with the sidecases mounted, while keeping a simple and clean look after the sidecases are removed. Although no extra mounting hardware is required, these sideracks cannot be readily transferred from one bike model to another. The holder allows the mounting of an upper plate through new supporting fins or top luggage rack (sold separately from holder).

PLX sideracks hug the tailsection of your bike tighter than any previous mounting system from Givi, and are compatible only with Givi PLX sidecases like the Givi V35.

Stylish, well-constucted replacement windscreen for the DL1000 ('04-) and DL650 features improved height and shape with top-notch quality. Mounts in minutes using stock fasteners. Features clear tint and precision-cut shape.

Stylish, well-constucted replacement windscreen for the DL1000 ('02-'03 only) features improved height and shape with top-notch quality. Mounts in minutes using stock fasteners. Features clear tint and precision-cut shape.

Universal adapter plate designed to add a Givi Monolock topcase to most existing flat rear luggage racks.

Provides a more upright, comfortable riding position by raising and retracting the original 7/8" (22mm) diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 25mm (1.0") and move them back 25mm (1.0"), producing an overall handlebar displacement of 35.4mm (1.4") at a 45 degree angle from the original position.

Provides a more upright, comfortable riding position by raising the original 7/8" (22mm) diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. Choose a rise height of 20mm (0.8"), 25mm (1"), 30mm (1.2"), or 50mm (2").

Readily installed on either the upper or lower license plate bolts, this is the perfect accessory for securing your helmet to your bike!

The Interphone F4 Bluetooth ®Motorcycle Communicator offers reliable, crystal-clear communication for a pair of riders at an excellent price. Effective motorcycle intercom maximum range of 0.3 miles (500m - if you're in Canada) between a pair of riders. The waterproof, full-duplex communicator allows both people to talk at once.

The Interphone F4 Bluetooth ®Motorcycle Communicator offers reliable, crystal-clear communication for a pair of riders at an excellent price. Effective motorcycle intercom maximum range of 0.3 miles (500m - if you're in Canada) between a pair of riders. The waterproof, full-duplex communicator allows both people to talk at once.

The Interphone F5 Bluetooth ®Motorcycle Communicator offers full-duplex communication for groups of up to 6 riders. Effective maximum range starts at 0.8 miles between a pair of riders and increases to 1.5 miles for a group of six riders. The full-duplex communication allows all six people to talk at once.

The Interphone F5 Bluetooth 3.0® Motorcycle Communicator offers full-duplex communication for groups of up to 6 riders. Effective maximum range starts at 0.8 miles between a pair of riders and increases to 1.5 miles for a group of six riders. The full-duplex communication allows all six people to talk at once.

Want Barkbusters Storm or VPS hand guards and a Kaoko Cruise Control? We've got you covered with this Barkbusters-compatible cruise control from Kaoko! Can also be used with OEM hand guards as well.

Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Fits with or without heated grips. Use with heated grips requires optional thrust washer (included).

Kaoko Cruise Controls are purpose-built throttle locker. They consist of a friction nut that is integral with a replacement handlebar-end weight. Fits with or without heated grips.

Fits:Suzuki DL650 (with ProTaper handlebars & original Suzuki full-wrap hand guards)

Suzuki DL1000 V-Strom (with ProTaper handlebars & original Suzuki full-wrap hand guards)

NOTE: Will also fit DL650/DL1000 without hand guards.

Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Fits with or without heated grips. Use with heated grips requires optional thrust washer (included). Also fits DL1000 V-Strom, '02-'03 with original Suzuki one-sided hand guards that do not connect to bar end.

Light saver headlight guards are constructed of a 30 mil (~1/16") thick, double-polished, optical quality, poly-vinyl film. This film is applied to the surface of your stock headlight to protect the lens from damage due to rocks, bugs, and other flying debris.

This accessory bracket provides a convenient mounting point for the on/off switch included with PIAA and Denali auxiliary lighting kits. Fits most metric bikes.

The MadStad Adjustable Windshield Mount for the Suzuki V-Strom DL1000 & DL650, '04-'11. It replaces the factory windshield mount, making your windshield infinitely adjustable within the 25 degrees of tilt angle and the 3" (76mm) of height adjustment. This adjustability is achieved without tools, while on the bike and in the riding position! Smooths out the air flow and eliminates turbulence. Powdercoated black.

MFW's bike specific Vario Mounting Brackets allow you to use their indexed footpeg mounting system to displace your footpegs using 3 different displacement arms and rotate your footpegs to 8 possible positions. Compatible only with MFW footpegs. Sold in pairs. Available in silver.

This MFW bike-specific mount allows you to install MFW adjustable footpegs on your motorcycle. Bike-specific mounts are compatible only with MFW footpegs. Mounts are sold in pairs and are available in silver.

Want to mount your Tool Tube or Bottle Mount to your SW-MOTECH siderack? These brackets which can mount in an infinite number of positions are the answer.

Same shape as the original manufacturer's windshield. Available in clear, smoke gray and gloss black.

Same shape as the original manufacturer's windshield. Available in clear, smoke gray and gloss black.

The MRA SpoilerScreen is a flat, sport-styled windshield with a deep recess in the center and a small spoiler in the center. Available in clear, smoke gray and gloss black.

The VarioTouringScreen features a 7-position adjustable spoiler at the top of a TouringScreen-shaped windshield. The adjustable spoiler can be used to redirect airflow to suit the rider.

The VarioTouringScreen features a 7-position adjustable spoiler at the top of a TouringScreen-shaped windshield. The adjustable spoiler can be used to redirect airflow to suit the rider.

The VarioTouringScreen features a 7-position adjustable spoiler at the top of a TouringScreen-shaped windshield. The adjustable spoiler can be used to redirect airflow to suit the rider.

MRA X-creen Add-On Variable Windscreen Spoiler Blade are now available to fit most original motorcycle windshields. This is the bolt-on style that requires you to drill holes in your existing screen. If you would be more comfortable with a clamp-on configuration please order MRA.XCC. Dimensions: approximately 15" wide x 6" tall

MRA X-creen Add-On Variable Windscreen Spoiler Blade are now available to fit most original motorcycle windshields. This is the clamp-on style. If you would be more comfortable with a bolt-on configuration that that requires you to drill holes in your existing screen please order MRA.XCA. Dimensions: approximately 15" wide x 6" tall

This cargo net is a strong elasticized bungee net with 6 nylon coated hardened steel hooks. An indispensable accessory for transporting awkward items!

Dimensions:17" x 17" square

The only pressure gauge you’ll ever need. Precision measuring up to 199.9 PSI/13.8 Bar in 0.1 PSI/BAR increments

The Oxford Products First Aid kit fits under the seat of most motorcycles (4” x 5.7” x 1.8”) and contains hygienically sealed medical supplies.

These hand covers mount to your handlebars to keep your hands warm & dry even in the coldest riding weather! A pouch on the inside allows you to add Oxford Electric Hothands for added warmth!