Product Listings

This high intensity light bar features 72 bi-color LEDs in 4 clusters and housed in a black polycarbonate case with clear lenses. Easily mounted to the underside of just about any toprack, this light bar is designed to enhance visibility with or without a topcase mounted! Light bar can also be flush mounted on any flat surface, including license plate brackets.

The Bags-Connection Daypack II Quick-Lock Tankbag is a small 5-liter to 7-liter tankbag that locks to a subtle bracket that installs to pre-existing threaded holes in the motorcycle’s gascap. Includes a large external lid pocket.

This small tankbag is now equipped with an expansion zipper. This small ballistic nylon tankbag, with a 3.5-liter capacity, expands to 6.5 liters and is perfect for shorter rides. Includes a cell phone holder with a transparent see-through window so you can see who is calling; map holder is optional. 2-year manufacturer warranty!

This medium-sized tankbag comes with a removable belt bag as well as a detachable mobile phone holder with belt-clip. This tankbag is best suited for sport and touring motorcycles. Total volume 8.5 liters. Please note that this capacity is the combined total capacity of the individual Vina bag components: the main tankbag + the cell phone pocket + the belt pouch (see dimensions of these individual components below).

This waterproof sport-touring pack system features 52 liters of storage volume without the need for hard luggage racks! Also includes paint protection film. 2-year manufacturer warranty!



Designed for installation over the passenger seat and portions of the tailsection.

The XBi2 is Chatterbox's latest bike-to-bike wireless intercom that also comes equipped with A2DP Bluetooth technology. It has all the features that the XBi has but with additional power that will allow simultaneous communications between 3 riders with up to 500 meters of range [1,640 ft] in optimum conditions.

Twisted Throttle is proud to present Denali LED Lighting. The Denali D1 light kit was designed from the ground up specifically for use on motorcycles. The compact 2”-square lamps house ultra-bright LED's with an incredibly low draw of 0.75 amps each. A two lamp kit provides similar light output as dual 55-watt halogen kits on the market.

Do it all with the rugged, waterproof, multi-mode nüvi 550. Drive, hike, bike or boat — this dynamic device switches modes to navigate your active lifestyle. It's packed with detailed street maps for North America or Europe and millions of places. Like the 500, nüvi 550 provides spoken turn-by-turn directions to your destination and accepts optional maps for any adventure.

motorcycle-friendly design, card slot, preloaded, full coverage, optional traffic alerts, anti-theft, MP3 player, picture viewer, speaks street names, XM Satellite compatible, Bluetooth wireless

Take a ride on a new route and explore the open road with the zūmo 660. This motorcycle-friendly navigator was built to lead you on all of your two-wheeled adventures. Whether you’re on a weekday ride just across town or a weeklong trip to an annual rally with friends, the zūmo 660 is ready to show you the way.

Strong, functional, and well-tested Monorack-style toprack for either general luggage or a Givi Monokey or Monolock compatible topcase (E460, E52, etc). The light design allows the perfect adjustment of the plate to the motorcycle using unique adjustable fasteners. Includes fitting kit and all hardware needed for mounting. Specify Monokey or Monolock plate when ordering.

The Wingrack Fitting Kit is the model-specific hardware kit required to mount the Givi Wingracks to your motorcycle. All necessary hardware, brackets, braces, fasteners, and instructions are included to install a Wingrack; the Givi Wingrack itself is sold separately.

Readily installed on either the upper or lower license plate bolts, this is the perfect accessory for securing your helmet to your bike!

MFW's bike specific Vario Mounting Brackets allow you to use their indexed footpeg mounting system to displace your footpegs using 3 different displacement arms and rotate your footpegs to 8 possible positions. Compatible only with MFW footpegs. Sold in pairs. Available in silver.

Same shape as the original manufacturer's windshield. Available in 7 colors, including a new carbon-look finish!

Same shape as the original manufacturer's windshield. Available in 7 colors, including a new carbon-look finish!

Same shape as the original manufacturer's windshield. Available in 7 colors, including a new carbon-look finish!

The MRA SpoilerScreen is a flat, sport-styled windshield with a deep recess in the center and a small spoiler in the center. Available in 10 colors.

The MRA SpoilerScreen is a flat, sport-styled windshield with a deep recess in the center and a small spoiler in the center. Available in 10 colors.

The MRA SpoilerScreen is a flat, sport-styled windshield with a deep recess in the center and a small spoiler in the center. Available in 10 colors.

Similar in shape to the original windscreen, the MRA TouringScreen includes a raised extension approximately 2-3 inches (5-7 cm) taller than the original windscreen.

Similar in shape to the original windscreen, the MRA TouringScreen includes a raised extension approximately 2-3 inches (5-7 cm) taller than the original windscreen.

Similar in shape to the original windscreen, the MRA TouringScreen includes a raised extension approximately 2-3 inches (5-7 cm) taller than the original windscreen.

The VarioTouringScreen features a 7-position adjustable spoiler at the top of a TouringScreen-shaped windshield. The adjustable spoiler can be used to redirect airflow to suit the rider.

Extend your riding range with this heavy-duty fuel canister! Air-tight seal allows fuel to be stored longer by preventing air from entering and degrading fuel. Made from single-piece, impact-extruded aluminum to prevent leaks and cracks. Bolstered shoulder and base to resist bulging when pressurized.

Highly reflective visibility vest designed to be worn over your riding gear for ultimate rider visibility.

Bungee cargo net for use on rear seats and luggage racks. Available in 2 sizes.

The only pressure gauge you’ll ever need. Precision measuring up to 199.9 PSI/13.8 Bar in 0.1 PSI/BAR increments

The Oxford First Aid kit fits under the seat of most motorcycles (4” x 5.7” x 1.8”) and contains hygienically sealed medical supplies.

These hand covers mount to your handlebars to keep your hands warm & dry even in the coldest riding weather!

The ultimate motorcycle sidestand support. Prevents sidestand from sinking into mud, slipping on loose gravel, and generally getting out of control! Park your bike with confidence on any surface with the MagniMate.

Tiny, all-weather clock/thermometer for handlebar or cockpit mounting. Includes ice alert and Velcro adhesive!

For 7/8"-diameter handlebars with 4.75" to 4.9"-long open-ended original grips (the most common grip size for sportbikes, enduros, and scooters). NEW 'Sport' grip style!

Motorcycle tool kit with carry case designed to fit under most rear seats (4” x 7” 1.25”)

ROK Straps "flat stretch straps" are designed specifically for motorcycles, ATV's (quads), and snowmobiles. Secure anything to a motorcycle without scratches - no hooks. Loops on both ends can be secured to just about anything, and the mid-strap buckle allows you to tighten the strap to your needs.

ROK Straps "flat stretch straps" are designed specifically for motorcycles, ATV's (quads), and snowmobiles. Secure anything to a motorcycle without scratches - no hooks. Loops on both ends can be secured to just about anything, and the mid-strap buckle allows you to tighten the strap to your needs.

Dual-tone air horn from Stebel of Italy available in Black or Chrome. Loud enough to convince other drivers that there's a derailed freight train barreling down on them. Don't press the horn button in the garage, it hurts! At 139dB it can be heard for almost 3 city blocks! YEEEOOOWWW!

The new Stop & Go Portable Mini-Air Compressor measures only 4" x 2" x 6" making it possible to be carried on virtually any motorcycle, scooter, or ATV. The built-in gauge allows you to observe the increased pressure with a reading up to 120 psi.

If you're tired of seeing your own shoulders in your rearview mirrors, then these are for you! This pair of mirror wideners screw into the original mirror mount on your motorcycle's fairing, providing a spacer between the base of the rearview mirror and the motorcycle's fairing.

Handlebar mounts use a machined clamp designed to clamp onto round 7/8" handlebars without damaging the bar. Clamp is 1/2" wide.

Designed with the motorcyclist in mind, the TPX Radar & Laser Detector Main Console is water, shock, and vibration resistant. It features oversized buttons for ease of use with riding gloves. Its large, angled, top-positioned LCD optimizes viewing from all riding positions and is easily viewable in direct sunlight. Now includes LED Visual Alert!