Product Listings

For 7/8"-diameter handlebars with 4.75" to 4.9"-long open-ended original grips (the most common grip size for sportbikes, enduros, and scooters).

Wrap these quickly and go! This heated grip solution allows you to keep the existing grips on your motorcycle and add heat when needed. Secured with a hook and pile grip strip.

Oxford's smart 3600mA charger with multiple charging rates which analyzes battery condition, will check polarity, and "float", or maintain a charge for battery longevity. Suitable for all 12 volt motorcycle, car, truck and leisure batteries.

Tiny, all-weather clock/thermometer for handlebar or cockpit mounting. Includes ice alert and Velcro adhesive!

Quickly charges battery at 600mA/hour until full and maintains a gentle trickle charge to keep battery optimized. Quick-connect leads included for easy coupling to the Oximiser between rides. Wall Bracket and extra long cables make for ease-of-use in your garage.

Designed for the driver to offer a set of hand holds to their passenger. It is reflective, adjustable, breathable, and designed to be worn over the jacket.

The Oxford "Screamer" alarm disc lock emits a 100DB blast after a short 4 beep warning, if the bike is moved. Simple to use, portable, carrying case included and loud, loud, loud. So loud Edvard Munch is turning over in his grave.

The Oxford StowAway allows you carry a spare helmet visor in an anti-scratch pouch that can be buckled to your waist or stowed in your luggage.

Motorcycle tool kit made from high quality Carbon Steel with carrying case designed to fit under most motorcycle seats (4” x 7” 1.25”)

The PIAA 005 Lamp Kit with bike-specific Multi-Fit Mounting Brackets. Xtreme White H-3 bulb and a brilliant chrome finish will make this handsome and functional addition to your bike. Includes lamps, wiring harness, switch, and mounting brackets.

Durable, dependable and reliable, PIAA Powersports Anti-Vibration bulbs are specifically designed for Powersports to significantly increase bulb life and performance. This item offers a bluer light than the standard Extreme-White Plus bulb.

Durable, dependable and reliable, PIAA Powersports Anti-Vibration bulbs are specifically designed for Powersports to significantly increase bulb life and performance.

The PowerHub fuse block allows you to safely connect up to 6 electronic devices to your motorcycle in a clean, workmanlike manner. Includes six 10-amp fused outputs, six ground posts, and a plug-and-play wiring harness for direct battery hookup. Each of the six outputs can be individually set as "always on" or "switched" on/off with the ignition of the motorcycle.

The quick-release case adapter is a universal case mounting system that will transform any Pelican style flat sided case into quick release motorcycle luggage. It features an integrated keyed snap lock which attaches and locks your case to the toprack on your motorcycle in one simple motion. This is an adapter kit, case sold separately.

The quick release case adapter is a universal case mounting system that will transform any Pelican style flat sided case into quick release motorcycle luggage. It features an integrated keyed snap lock which attaches and locks your case to the sideracks on your motorcycle in one simple motion. This is an adapter kit, case sold separately.

The quick release case adapter is a universal case mounting system that will transform any flat sided case into quick release motorcycle luggage. It features an integrated keyed snap lock which attaches and locks your case to your motorcycle in one simple motion. This is an adapter kit, case sold separately.

These bar end protectors are simple to fit and replace the OEM bar end weights. Includes a replacable end "slider" or puck.

Constructed of heavy-duty machined steel, aluminum, high-density nylon, R&G frame sliders provide maximum protection and high quality fit and finish.

Constructed of heavy-duty machined steel, aluminum, and high-density nylon, R&G frame sliders provide maximum protection and high quality fit and finish. R&G "Aero" sliders have an aerodynamic teardrop shape for a more streamlined look than traditional cylindrical slider pucks.

These fork protectors were designed to help eliminate damage to the front axle during a drop, a skidding stop or a "Low Side".

R&G Racing Bike cover. Outdoor protection with anti-theft features and paint protection built in.

R&G Plug 'n Play Micro Turn Signal (pair). Designed to fit the R&G line of "Tidy Tail" fender eliminators. Suggested: R&G Plug 'n Play Micro Turn Signal Resistors. In many cases, after fitting these indicators, you may find that they flash too fast or too slow. R&G Resistor solves this issue (RGR0001)

R&G toe chain guards keep your foot from being caught in between the chain and rear sprocket in the event of a crash. It happens!

This toe chain guard features an elegant "shark fin" shape and ABS plastic construction.

R&G toe chain guards keep your foot from being caught in between the chain and rear sprocket in the event of a crash. It happens!

ROK Straps "flat stretch straps" are designed specifically for motorcycles, ATV's (quads), and snowmobiles. Secure anything to a motorcycle without scratches - no hooks. Loops on both ends can be secured to just about anything, and the mid-strap buckle allows you to tighten the strap to your needs.

ROK Straps "flat stretch straps" are designed specifically for motorcycles, ATV's (quads), and snowmobiles. Secure anything to a motorcycle without scratches - no hooks. Loops on both ends can be secured to just about anything, and the mid-strap buckle allows you to tighten the strap to your needs.

The STASH BOX is a weather resistant storage box that mounts between the motorcycle and the license plate. It is ideally suited to storing the vehicle registration and other small objects while remaining unobtrusive. The Stash Box has features that provide benefits over other motorcycle storage devices i.e., low cost, concealed mounting location, vehicle styling is unaffected, and easy accessibility.

Twisted Throttle has put together this complete mounting solution for the Suzuki V-Strom (650 & 1000). It consists of an L-Bracket, a U-Bolt and Nylock nuts to mount the Stebel 139dB Airhorn to the left upright of the tubular fairing stay You do not need to remove the fairing to access this location. This horn mounting bracket may work with other applications on a round pipe ranging from 17mm to 19mm.

Dual-tone air horn from Stebel of Italy available in Black or Chrome. Loud enough to convince other drivers that there's a derailed freight train barreling down on them. Don't press the horn button in the garage, it hurts! At 139dB it can be heard for almost 3 city blocks! YEEEOOOWWW!

New design with a 4mm-thick aluminum baseplate and 3mm-thick sideplates for heavy-duty, light-weight protection. Redesigned rear mounting bracket prevents damage to screw heads when sliding over rocks.

The must-have accessory for sport-touring! Greatly eases basic chain maintenance, tire changes, parking, and bike cleaning. Super-strong steel construction features typical German design and high engineering standards. Superb integration with the factory exhaust and sidestand components - retain all existing features without sacrificing lean angle or clearances.

Polished aluminum. Heavy-duty, corrosion resistant protection for your bike.

Constructed of heavy-duty mild steel, SW-MOTECH crashbars are designed to provide maximum protection, optical integration, and high-quality fit and finish.

This electronics mount is outfitted with quick-disconnect and vibration damped mechanisms. Fits all 10 to 12.5mm (0.4 to 0.5 inch) diameter crossbars. Compatible with most handlebar crossbars, including the SW-MOTECH universal handlebar crossbar LST.00.244.100.

This universal fixing bracket allows you to attach a flush-mount 12-volt BMW/Euro-style socket to most handlebar mounting clamps for easy attachment of electrical accessories!

This universal fixing bracket allows you to attach a SW-MOTECH flush-mount 12-volt Cigarette-style socket to most handlebar mounting clamps for easy attachment of electrical accessories!

Spread the load of your adventure bike over a larger surface with this aluminum alloy CNC machined kick stand foot print enlarger. The side stand will rest in the stock position when not in use.

If you're tired of seeing your own shoulders in your rearview mirrors, then these are for you! This pair of mirror wideners screws into the original mirror mount on your motorcycle handlebars, providing a spacer between the base of the rearview mirror and the motorcycle's original mirror mount.

The convertible footpeg system from SW-Motech allows you to replace your stock pegs with wider pegs at one of two heights, complete with a removable rubber pad for quick conversion from on to off-road applications! Bike-specific mount and set of footpegs with removable textured rubber foot pads included.

The Quick-Lock EVO carrier is next generation of luggage carrier by SW-MOTECH. Same, great Quick-Lock design, with a more robust, tubular steel rack that has an even more narrow profile than the original sidecarrier! The racks can be removed from the bike in less than 30 seconds without special tools by opening 3-4 quick-release fasteners on each side. These black, powder-coated, tubular steel racks are compatible with luggage cases from GIVI (Monokey system), TraX ALU-BOX, Pelican, Micatech, Kappa, Shad, Hepco-Becker, Krauser, and more. Luggage-specific adapter kits are sold separately.

Protects the radiator from rocks, bugs, and other UFOs.

This guard protects the rear master cylinder from impact and normal wear from boot heels equally as well. Constructed of lightweight high strength laser cut and precision bent aluminum with a brushed silver finish.

Twisted Throttles's highly functional and elegant toprack features a strong, integrated, lightweight steel design. The smart, multi-functional design accepts many brands of topcases including Coocase, TraX ALU-BOX, Pelican and GIVI (Monolock or Monokey).

Installs in minutes by clamping onto existing 7/8" (22mm) diameter handlebar. Perfect for mounting GPS, radar detector, coffee mug, flux capacitor, etc. Available in powdercoated silver (s) or black (b).

This accessory mount uses existing windscreen mounting points to provide a secure, flat mounting surface with an adjustable viewing angle and height. The 8 pre-drilled M6 mounting holes allow easy direct attachment of your motorcycle accessories. Pre-drilled holes are perfectly positioned to attach any RAM-B-238-compatible RAM mounts (sold separately) OR a TomTom Rider GPS.