Product Listings

Used to convert 22mm handlebar clamps to 28mm handlebar clamps. Fits hole distances 30-37mm w/ M8 bolts. Black or Silver.

Provides a more upright, comfortable riding position by raising and retracting the original 7/8" (22mm) diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 25mm (1.0") and move them back 25mm (1.0"), producing an overall handlebar displacement of 35.4mm (1.4") at a 45 degree angle from the original position.

Includes one pair of handlebar risers (20mm riser height) in silver.



No modifications of brake lines are necessary for installation.

Includes one pair of handlebar risers (30mm riser height) in silver.

Provides a more upright, comfortable riding position by raising the original 1-1/8" (28mm) diameter tubular handlebar by 30mm (1.2"). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. Also perfect for use with oversize handlebars (ProTaper, Magura, etc.).

Provides a 30mm rise in handlebar mount height for the 2008 and later R1200GS and R1200GS Adventure. Does not fit earlier models. Silver matches original handlebar attachment hardware.

Provides a more upright, comfortable riding position by raising the original 7/8" (22mm) diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. Choose a rise height of 20mm (0.8"), 25mm (1"), 30mm (1.2"), or 50mm (2").

Includes one-piece handlebar riser block (20mm rise height) in black, and longer screws.



No modification of brake lines is necessary for installation.

Includes one-piece handlebar riser block (20mm rise height) in silver, and longer screws.



No modification of brake lines is necessary for installation.

Provides a more upright, comfortable riding position by raising the original 1-1/8" (28mm) diameter tubular handlebar by 30mm (1.2"). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. Perfect for use with oversize handlebars (ProTaper, Magura, etc.).

Provides a more upright, comfortable riding position by raising the original 7/8" (22mm) or 1-1/8" (28mm) diameter tubular handlebar by 30mm (1.2"). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware.

Provides a more upright, comfortable riding position by raising the original 7/8" (22mm) or 1-1/8" (28mm) diameter tubular handlebar by 30mm (1.2"). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware.

Provides a more upright, comfortable riding position by raising the original handlebar by approximately 25mm (1 inch) and rotating them toward the rider by 15 degrees. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware.

Width of handlebar at clamps is 28mm (1 1/8") and tapers to 22mm (7/8") at ends - no change of controls or handgrips required! Manufactured by LSL Motorradtechnik. Available in silver or black.