Product Listings

New for 2010, Barkbusters presents their Variable Section 28mm fat bar. The bars are 22mm (7/8") at the grips/control perches, with an immediate taper to 28mm for the majority of the bar. This kit includes a bike-specific riser/converter for the Triumph Tiger 1050. No change of cables or controls necessary.

Used to convert 22mm handlebar clamps to 28mm handlebar clamps. Fits hole distances 30-37mm w/ M8 bolts. Black or Silver.

Provides a more upright, comfortable riding position by raising and retracting the original 7/8" (22mm) diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 25mm (1.0") and move them back 25mm (1.0"), producing an overall handlebar displacement of 35.4mm (1.4") at a 45 degree angle from the original position.

Moves bars up 40mm & back 40mm to unload weight from wrists & forearms and relax the neck. No change of brake cable necessary. Anodized black.

The risers are placed between the fork crown and the handlebars to raise the bars up 4/5" (20mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. This is the same handlebar riser kit included in the VPS handguards for the BMW F650GS & F650GS/Dakar, '00-'07.

Includes one pair of handlebar risers (20mm riser height) in silver.



No modifications of brake lines are necessary for installation.

Includes one pair of handlebar risers (30mm riser height) in silver.

The risers relocate the stock handlebars 1" closer to the rider. This will help to relieve wrist and neck pain on long rides.

Moves bars up & back diagonally ~1" to unload weight from wrists & forearms and relax the neck.

Moves bars up & back diagonally ~1" to unload weight from wrists & forearms and relax the neck.

Provides a more upright, comfortable riding position by raising the original 1-1/8" (28mm) diameter tubular handlebar by 30mm (1.2"). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. Also perfect for use with oversize handlebars (ProTaper, Magura, etc.).

Provides a 30mm rise in handlebar mount height for the 2008 and later R1200GS and R1200GS Adventure. Does not fit earlier models. Silver matches original handlebar attachment hardware.

Moves bars up & back diagonally ~3/4" to unload weight from wrists & forearms and relax the neck.

Provides a more upright, comfortable riding position by raising the original 7/8" (22mm) diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. Choose a rise height of 20mm (0.8"), 25mm (1"), 30mm (1.2"), or 50mm (2").

The risers are placed between the fork crown and the handlebars to raise the bars up 1-1/4" (32mm) and back 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. They are anodized to match the color of the stock bar mounts. Requires no change of any control cables, wiring, or hoses.

This handlebar riser only fits 1-1/8" (28mm) diameter bars. The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (31mm) and back 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The H121 risers fit Honda 1" diameter tube style handle bars. The risers are placed between the fork crown and the handlebars to raise the bars up 1" (25mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm) and back 1" (25mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the base of the handlebars to raise the bars up 2 1/2" (63mm) and back 1 5/8" (41mm). This will help to relieve wrist and neck pain on long rides. Longer bolts are supplied. Requires no change of any control cables, wiring, or hoses. This riser is for the models with a one piece handlebar and riser.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/2" (38mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/2" (38mm) and back 7/8" (22mm). This will help to relieve wrist and neck pain on long rides. Requires minimal re-routing of some control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 1" (25mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 2" (50.8mm) and back 1 1/8" (28.5mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. This riser is for models with a one piece handlebar and riser.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (38mm) and back 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Longer bolts are supplied. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (38mm). This will help to relieve wrist and neck pain on long rides. Longer bolts are supplied. Generally requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm) and back approximately 5/8" (17mm). This will help to relieve wrist and neck pain on long rides. Longer bolts are supplied. Requires no change of any control cables, wiring, or hoses.

These risers fit Vulcans with 1" (25mm) tube handlebars. The risers are placed between the fork crown and the handlebars to raise the bars up 1" (25mm). This will help to relieve wrist and neck pain on long rides. Longer bolts are supplied. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm) and back approximately 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Longer bolts are supplied. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/2" (38mm). and back 1" (25mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. The risers are cut and powder coated to match the factory bracket.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 inch (25mm) and back 5/8 inch (16mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 3/4 (19mm)". This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 7/8" (22mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 5/8" (16mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 1" (25mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

Provides a more upright, comfortable riding position by raising the original 1-1/8" (28mm) diameter tubular handlebar by 30mm (1.2"). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. Perfect for use with oversize handlebars (ProTaper, Magura, etc.).

Provides a more upright, comfortable riding position by raising the original 7/8" (22mm) or 1-1/8" (28mm) diameter tubular handlebar by 30mm (1.2"). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware.

Provides a more upright, comfortable riding position by raising the original 7/8" (22mm) or 1-1/8" (28mm) diameter tubular handlebar by 30mm (1.2"). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware.