Product Listings

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/2" (37mm) and back 1" and (25mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (38mm). This is double the riser height of part# S122. This will help to relieve wrist and neck pain on long rides. We recommend rerouting the choke cable to remove cable tension when the handlebars are turned to full right or left.

The risers are placed between the fork crown and the handlebars to raise the bars up 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. We recommend rerouting the choke cable to remove cable tension when the handlebars are turned to full right or left.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (38mm). This is double the riser height of part# S222. This will help to relieve wrist and neck pain on long rides. We recommend rerouting the choke cable to remove cable tension when the handlebars are turned to full right or left.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm) and back 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/8" (32mm)and back 3/4" (21mm). This will help to relieve wrist and neck pain on long rides. Does not requires change of front brake hydraulic hose.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm). This will help to relieve wrist and neck pain on long rides. Does not require change of front brake hydraulic hose.

The risers are placed between the fork crown and the handlebars to raise the bars up 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

For use with original top clamp. Adds an additional 20mm of rise to the bar height without changing of control cables, wiring, or hoses. However, the installer should always check for adequate cable/wiring/hose slack during installation. Available in polished silver finish.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm). This will help to relieve wrist and neck pain on long rides. Requires NO change of control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 " (25mm) and back 1/2 " (12.5mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 " (25.5mm) and back 1 1/4" (32mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/2" (38mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

Provides a more upright, comfortable riding position by raising the original handlebar by approximately 25mm (1 inch). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. No change of control cables, wiring, or hoses is required. It is recommended that the installer should check for adequate cable/wiring/hose slack during installation.

The risers are placed between the fork crown and the handlebars to raise the bars up 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The risers are placed between the fork crown and the handlebars to raise the bars up 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

Moves bars up & back diagonally approximately 2" to unload weight from wrists & forearms and relax the neck. Fits all 1-1/8" diameter handlebars, but is especially designed for use on BMW R1200GS '04-, R1200GS Adventure '06-, HP2, and KTM LC4 & LC8 models with 28mm-diameter handlebars. Clear anodized billet aluminum.

Moves bars up & back diagonally approximately 2" to unload weight from wrists & forearms and relax the neck. Fits all 7/8" diameter handlebars, but is especially effective for Buells and other bikes with asymmetrical handlebar mounts. Clear anodized finish.