Product Listings

Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Will work with or without Barkbusters Full-Wrap VPS or Storm handguards. Does not fit K1200RS, R1100RS or R1150RS.

This MFW bike-specific mount allows you to install MFW adjustable footpegs on your motorcycle. Bike-specific mounts are compatible only with MFW footpegs. Mounts are sold in pairs and are available in silver.

This MFW bike-specific mount allows you to install MFW adjustable footpegs on your motorcycle. Bike-specific mounts are compatible only with MFW footpegs. Mounts are sold in pairs and are available in silver.

MRA Customshield windscreens are available in clear or smoke grey. Universal chrome two-point handlebar mounting hardware (MRA.HK kit - sold separately) fits both 7/8" (22mm) diameter and 1" (25.4mm) diameter handlebars. Bike-specific windshield mounting hardware (sold separately) is required for certain bike models.

19.3" (49cm) tall x 17.1" (43.5cm) wide.

MRA Highwayshield windscreens are available in clear or smoke grey. Universal chrome two-point handlebar mounting hardware (MRA.HK kit - sold separately) fits both 7/8" (22mm) diameter and 1" (25.4mm) diameter handlebars. Bike-specific windshield mounting hardware (sold separately) is required for certain bike models.

18.5" (47cm) tall x 16.1" (41cm) wide.

MRA RacingScreen for Naked Bikes uses a two-point handlebar mount for Naked Bikes and Cruisers. Available in clear, smoke grey, and gloss black.

MRA Roadshield windscreens are available in clear, smoke grey, and gloss black. Universal two-point handlebar mounting hardware (sold separately) fits 7/8", 1", and 28mm diameter handlebars. 12.4" (31.5cm) tall x 15" (38cm) wide.

The MRA SpeedScreen features one-piece construction with a two-point handlebar mount. Perfect for naked bikes and cruisers. Mounting hardware (sold separately) fits 22mm, 25mm, and 28mm diameter handlebars. 12.2" tall x 15.75" wide.

MRA VarioScreen windscreens feature two-piece construction with a two-point handlebar mount for Naked Bikes and Cruisers. The upper portion of the windscreen can be adjusted (+/- 2 inches) to various heights to suit the rider's taste and smooth out airflow. Available in clear or smoke grey. Universal mounting hardware (sold separately) fits 7/8" - 1-1/8" diameter handlebars. 19.3" (49cm) tall x 17.3" (44cm) wide.

MRA VarioTouringScreen windscreens feature two-piece construction with a two-point handlebar mount for Naked Bikes and Cruisers. The upper spoiler portion of the windshield can be adjusted (+/- 2 inches) to 7 unique positions to suit the rider's taste and smooth out airflow. Available in clear, smoke, and gloss black. 12 inches tall x 16 inches wide (without add-on spoiler).

The VarioTouringScreen features a 7-position adjustable spoiler at the top of a TouringScreen-shaped windshield. The adjustable spoiler can be used to redirect airflow to suit the rider.

This cargo net is a strong elasticized bungee net with 6 nylon coated hardened steel hooks. An indispensable accessory for transporting awkward items!

Dimensions:17" x 17" square

The only pressure gauge you’ll ever need. Precision measuring up to 199.9 PSI/13.8 Bar in 0.1 PSI/BAR increments

The Oxford Products First Aid kit fits under the seat of most motorcycles (4” x 5.7” x 1.8”) and contains hygienically sealed medical supplies.

These hand covers mount to your handlebars to keep your hands warm & dry even in the coldest riding weather! A pouch on the inside allows you to add Oxford Electric Hothands for added warmth!

For 7/8"-diameter handlebars with 4.75" to 4.9"-long open-ended original grips (the most common grip size for sportbikes, enduros, and scooters). NEW 'Sport' grip style!

For 7/8"-diameter handlebars with 4.75" to 4.9"-long open-ended original grips (the most common grip size for sportbikes, enduros, and scooters).

Wrap these quickly and go! This heated grip solution allows you to keep the existing grips on your motorcycle and add heat when needed. Secured with a hook and pile grip strip.

Oxford's smart 3600mA charger with multiple charging rates which analyzes battery condition, will check polarity, and "float", or maintain a charge for battery longevity. Suitable for all 12 volt motorcycle, car, truck and leisure batteries.

Tiny, all-weather clock/thermometer for handlebar or cockpit mounting. Includes ice alert and Velcro adhesive!

Quickly charges battery at 600mA/hour until full and maintains a gentle trickle charge to keep battery optimized. Quick-connect leads included for easy coupling to the Oximiser between rides. Wall Bracket and extra long cables make for ease-of-use in your garage.

Designed for the driver to offer a set of hand holds to their passenger. It is reflective, adjustable, breathable, and designed to be worn over the jacket.

The Oxford "Screamer" alarm disc lock emits a 100DB blast after a short 4 beep warning, if the bike is moved. Simple to use, portable, carrying case included and loud, loud, loud. So loud Edvard Munch is turning over in his grave.

The Oxford StowAway allows you carry a spare helmet visor in an anti-scratch pouch that can be buckled to your waist or stowed in your luggage.

Motorcycle tool kit made from high quality Carbon Steel with carrying case designed to fit under most motorcycle seats (4” x 7” 1.25”)

The PIAA 005 Lamp Kit with bike-specific Multi-Fit Mounting Brackets. Xtreme White H-3 bulb and a brilliant chrome finish will make this handsome and functional addition to your bike. Includes lamps, wiring harness, switch, and mounting brackets.

The 1100X lamp is loved for its symmetrical pattern allowing for greater visibility even when leaning in turns. PIAA's most popular PowerSports lamp in a complete kit to fit a multitude of applications. Includes lamps, wiring harness, switch, and vehicle-specific mounting brackets.

Durable, dependable and reliable, PIAA Powersports Anti-Vibration bulbs are specifically designed for Powersports to significantly increase bulb life and performance. This item offers a bluer light than the standard Extreme-White Plus bulb.

Durable, dependable and reliable, PIAA Powersports Anti-Vibration bulbs are specifically designed for Powersports to significantly increase bulb life and performance.

The PowerHub fuse block allows you to safely connect up to 6 electronic devices to your motorcycle in a clean, workmanlike manner. Includes six 10-amp fused outputs, six ground posts, and a plug-and-play wiring harness for direct battery hookup. Each of the six outputs can be individually set as "always on" or "switched" on/off with the ignition of the motorcycle.

ROK Straps "flat stretch straps" are designed specifically for motorcycles, ATV's (quads), and snowmobiles. Secure anything to a motorcycle without scratches - no hooks. Loops on both ends can be secured to just about anything, and the mid-strap buckle allows you to tighten the strap to your needs.

ROK Straps "flat stretch straps" are designed specifically for motorcycles, ATV's (quads), and snowmobiles. Secure anything to a motorcycle without scratches - no hooks. Loops on both ends can be secured to just about anything, and the mid-strap buckle allows you to tighten the strap to your needs.

The STASH BOX is a weather resistant storage box that mounts between the motorcycle and the license plate. It is ideally suited to storing the vehicle registration and other small objects while remaining unobtrusive. The Stash Box has features that provide benefits over other motorcycle storage devices i.e., low cost, concealed mounting location, vehicle styling is unaffected, and easy accessibility.

Dual-tone air horn from Stebel of Italy available in Black or Chrome. Loud enough to convince other drivers that there's a derailed freight train barreling down on them. Don't press the horn button in the garage, it hurts! At 139dB it can be heard for almost 3 city blocks! YEEEOOOWWW!

SW-MOTECH's highly functional and elegant toprack features a strong, integrated-looking, lightweight aluminum design. Mounts alone or with SW-MOTECH Quick-Lock sideracks (available separately). The smart, multi-functional design enables the use of a Quick-Lock adapter plate (sold separately) to carry GIVI Monokey, TraX ALU-BOX, Kappa, Hepco & Becker, and Krauser topcases. A GIVI Monolock topcase may be mounted on the Alu-Rack using the permanent-mount adapter plate included with the Monolock case. 12-inch wide and 16-inch wide soft luggage adapter plates are also available for the Alu-Rack to expand the capacity for carryling soft luggage.

Constructed of heavy-duty mild steel, SW-MOTECH crashbars are designed to provide maximum protection, optical integration, and high-quality fit and finish.

This bike-specific electronics mount is outfitted with quick-disconnect and vibration damped mechanisms. Fits the BMW F800R. It will hold any RAM-B-238-compatible RAM Mount, Garmin Zumo GPS, TomTom Rider GPS, or a Bags-Connection GPS or PDA pocket.

This universal fixing bracket allows you to attach a flush-mount 12-volt BMW/Euro-style socket to most handlebar mounting clamps for easy attachment of electrical accessories!

This universal fixing bracket allows you to attach a SW-MOTECH flush-mount 12-volt Cigarette-style socket to most handlebar mounting clamps for easy attachment of electrical accessories!

If you're tired of seeing your own shoulders in your rearview mirrors, then these are for you! This pair of mirror wideners screws into the original mirror mount on your motorcycle handlebars, providing a spacer between the base of the rearview mirror and the motorcycle's original mirror mount.

High-quality, German-made Quick-Lock luggage sideracks by SW-MOTECH. This unique design allows the racks to be removed from the bike in less than 30 seconds without special tools by opening 3-4 quick-release fasteners on each side. These narrow profile, black powder-coated steel racks are compatible with luggage cases from GIVI (Monokey system), TraX ALU-BOX, Pelican, Micatech, Kappa, Shad, Hepco-Becker, Krauser, and more. Luggage-specific adapter kits are sold separately. Strong enough to withstand adventure-touring off-road abuse, yet completely removable for local cruising or track days.

This is the Techmount 3rd generation mounting system. They were able to combine all of the current production handlebar sizes from 7/8” (22mm) up to 1 ¼” (32mm) into one mount system. This allows it to fit virtually every motorcycle with tubular handlebars. Requires only ¾” of handlebar space and can be mounted at any angle. Available in Black, Silver oe Chrome. Having no need for a shaft, makes this mount system very strong and very compact.

Designed with the motorcyclist in mind, the TPX Radar & Laser Detector 2.0 Main Console is water, shock, and vibration resistant. Now with increased sensitivity and more mode functions! It features oversized buttons for ease of use with riding gloves. Its large, angled, top-positioned LCD optimizes viewing from all riding positions and is easily viewable in direct sunlight. Now includes LED Visual Alert!

This aluminum BPA Free water bottle will proudly go around the world with you pronouncing your love of Twisted Throttle and your commitment to reduce waste.

This Bottle mount kit attaches directly to the outside of any flat-sided sidecases and can be used to carry our MSR 30oz Fuel Bottle or Twisted Throttle Water Bottle as well as any other gear that can fit inside of it. It has an internal diameter of 3.12" and an internal height of 11.5".