SW-MOTECH Alu-Rack Topcase Adapter Plate (GIVI / Kappa Monokey)
Item No: GPT.00.152.405
| Our Price: | $40.00 |
The SW-MOTECH top-plate releases from the Alu-Rack toprack in seconds thanks to special quick-release fasteners. Discontinued style of plate shown.
A typical SW-MOTECH ALU-Rack toprack (pictured without the a detachable top-plate). Alu-Racks can be used with or without SW-MOTECH Quick-Lock sideracks.
Removable quick-release adapter plate for mounting a standard Givi Monokey or Kappa Monokey topcase (E52, V46, E460, E45, E360, E36, E35, etc.) to an SW-MOTECH Alu-Rack toprack.
Includes Givi fitting lugs and rubber vibration-reducing bumpers.
The top plate can be removed from the Alu-Rack by turning each of three quarter-turn Quick-Lock fasteners 90 degrees, providing a cleaner look to the motorcycle when the topcase and topplate are not in use.
Givi brakelight kits are 100% compatible with this top plate.
If using a Givi brakelight kit with your SW-MOTECH top plate, we recommend also purchasing the Quick-Release Wiring Kit for SW-MOTECH top plates (part EC.TT-00001), so that your top plate will still be removable after you wire up the topcase's brake light!
Weight of adapter plate: 1.4 lbs
| Related Files: | |
|---|---|
| SW-MOTECH Alu-Rack Topcase Adapter Plate (GIVI / Kappa Monokey) [PDF] |
Comments (1)
09.09.2007 13:59 » Fit and function of adapter plate David Choo
Admin note: This is a dedicated thread for discussing the Motech Alu-Rack Topcase Adapter Plate (Givi or Kappa). Okay for starters this may seem a little unfair as I have the OLD discontinued GPT.00.152.205 style of adapter plate. This new GPT.00.152.405 plate is now in stock at Twisted Throttle and has a very different design. The quick release function for the Monokey plate is great I love that part. Now for the dislikes. The quick-disconnect bolts are not very reliable. At first they held great after 2 months and 4000 miles the most rear bolt spring washer went flat and broke out while riding causing the plate and box to bounce. The retainer springs for the top plate wear into the top rack its self from the normal bike vibration. Okay, I know this sounds horrible but If you bolt it directly with a couple of rubber washers to isolate the vibration it becomes a mute point as long as you are not trying to remove the top plate regularly. }}}Note from Mr. Twisted: the Quick-Release fasteners are under warranty for two years from date of purchase. If you have a set that fails, just call us for a replacement. Based on the low number of calls we get about this, such failures are not common.