Twisted Throttle home
Search

Stebel Horn Mount for the V-Strom DL650 & DL1000 by TWISTED THROTTLE

Item No: HMT.05.821.10000

Our Price: $17.50
In Stock

Locate the LEFT front fairing stay near the left fork. This can be accessed from the top without removing any bodywork.Locate the LEFT front fairing stay near the left fork. This can be accessed from the top without removing any bodywork.

 

Place the U-bolt and the Backing Plate around the fairing stay with the left hand nylock nut twisted on ONE TURN ONLY. Otherwise, you will be unable to place it over the fairing stay.Place the U-bolt and the Backing Plate around the fairing stay with the left hand nylock nut twisted on ONE TURN ONLY. Otherwise, you will be unable to place it over the fairing stay.

 

Slide the backing plate over the end of the U -bolt. Place the short length of the L-bracket onto the end of the U -bolt without a nylock nut. Tighten the nylock nuts. Do not tighten them completely so that you can make adjustments once the horn is installed.Slide the backing plate over the end of the U -bolt. Place the short length of the L-bracket onto the end of the U -bolt without a nylock nut. Tighten the nylock nuts. Do not tighten them completely so that you can make adjustments once the horn is installed.

 

Install the horn. Be sure to read the mounting instructions included with the horn. Keep the Stebel Air Horn within the 15 degree operating parameters listed in the instructions [included].Install the horn. Be sure to read the mounting instructions included with the horn. Keep the Stebel Air Horn within the 15 degree operating parameters listed in the instructions [included].

 

Twisted Throttle has put together this complete mounting solution for the Suzuki V-Strom (650 & 1000). It consists of an L-Bracket, a U-Bolt and Nylock nuts to mount the Stebel 139dB Airhorn to the left upright of the tubular fairing stay You do not need to remove the fairing to access this location. This horn mounting bracket may work with other applications on a round pipe ranging from 17mm to 19mm.



Locate the LEFT front fairing stay near the left fork. This can be accessed from the top without removing any bodywork.

Place the U-bolt and the Backing Plate around the fairing stay with the left hand nylock nut twisted on ONE TURN ONLY. Otherwise, you will be unable to place it over the fairing stay.

Slide the backing plate over the end of the U -bolt. Place the short length of the L-bracket onto the end of the U -bolt without a nylock nut. Tighten the nylock nuts. Do not tighten them completely so that you can make adjustments once the horn is installed.

Install the horn. Be sure to read the mounting instructions included with the horn. Keep the Stebel Air Horn within the 15 degree operating parameters listed in the instructions [included].

 
Related Files:
Install Instructions - Stebel Horn Mount for the DL 650 by TWISTED THROTTLE [PDF]
(804.51 KB)
Comments (0)

Be the first to write a comment!

Write a comment on this product

Receive email updates on sales and special offers:
twistedthrottle.com is a secure site that respects your privacy
Twisted Throttle ® is a registered trademark of Twisted Throttle LLC
Website & Original Content © 2004-2010. All rights reserved.