Twisted Throttle home
Search

Givi E97 Halogen Brakelight/Stoplight Kit for E52 Maxia Topcase

Item No: Givi E97

List Price: $61.00
Our Price: $54.90
Brakelight Quick-Disconnect Wiring Kit for SW-MOTECH Alu-Racks: optional

In Stock
Limited Stock - Order Soon!

When used with Givi mounting plates and the optional brakelight kit, the E52 New Maxia includes a hands-free electrical connector.When used with Givi mounting plates and the optional brakelight kit, the E52 New Maxia includes a hands-free electrical connector.

 

The E97 stoplight kit for the E52 New Maxia features an ultra-bright  dual-brakelight system for safety and visibility.The E97 stoplight kit for the E52 New Maxia features an ultra-bright dual-brakelight system for safety and visibility.

 

E52 with E97 light kit.  ST1300 wire harness is shown in the installer's hand after attaching the E97 wire leads to the bike's brake light wires.E52 with E97 light kit. ST1300 wire harness is shown in the installer's hand after attaching the E97 wire leads to the bike's brake light wires.

 

The E97 light kit has electrical contacts that will be installed within the E52 topcase.  These contacts are shown to the right of the case's latch mechanism.The E97 light kit has electrical contacts that will be installed within the E52 topcase. These contacts are shown to the right of the case's latch mechanism.

 

E97 brakelights in action!E97 brakelights in action!

 

Givi Monokey top plate with E97 eletrical contacts installed.  The electrical contacts are attached to a wire that you can splice into your bike's brake light circuit.Givi Monokey top plate with E97 eletrical contacts installed. The electrical contacts are attached to a wire that you can splice into your bike's brake light circuit.

 

The E97 electrical contacts that fit into your Givi Monokey top plate are attached to a wire that you can splice into your bike's brake light circuit.The E97 electrical contacts that fit into your Givi Monokey top plate are attached to a wire that you can splice into your bike's brake light circuit.

 

Dual incandescent brakelight kit for the Givi E52 New Maxia topcase. Significantly increase safety and visibility by raising and increasing you bike's brakelight capability. Includes hands-free connector kit which works with all newer (post -'00) Givi-manufactured topracks (Wingrack, Monorack, and E250 mounting plates).

Simple installation using pre-molded cutouts on the E52. Requires some disassembly of the E52 accent panels using a screwdriver. Requires tapping existing brakelight wires.

Note: hand-free connector mounts on the base of the topcase and is compatible ONLY with Givi or SW-MOTECH-manufactured topracks. Using this brakelight kit with the Five Stars topracks precludes use of the included hands-free connector. If you still want your top plate to be removable from an SW-MOTECH toprack after installing a brake light kit, you'll also need a brakelight quick-disconnect kit.

The E97 is the same brake light that comes pre-installed in the E52NF. If you are buying the E52NF topcase, you do not need to also buy the E97.

If you already own an E52 topcase (E52N, E52G730, E52N902, etc.) without a brakelight, then the E97 will provide everything you need to install the light kit in your E52 topcase.

 
Comments (0)

Be the first to write a comment!

Write a comment on this product

Receive email updates on sales and special offers:
twistedthrottle.com is a secure site that respects your privacy
Twisted Throttle ® is a registered trademark of Twisted Throttle LLC
Website & Original Content © 2004-2010. All rights reserved.