CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us

SW-MOTECH Alu-Rack Toprack to fit TraX, Givi & Other Topcases for Kawasaki Ninja 250 '88-'07

SW-MOTECH Alu-Rack Toprack to fit TraX, Givi & Other Topcases for Kawasaki Ninja 250 '88-'07

$109.95
SKU: GPT.08.819.10000.B

In stock

Only 9 left


 

The SW-MOTECH ALU-RACK is a clean looking, stand-alone base system that allows Quick-Release fitment of TraX, Givi and other Topcases, SW-MOTECH luggage racks, or SW-MOTECH Bags-Connection Quick-Lock Tankbags to keep your motorcycle as versatile as you are.

ALU-RACK Topracks are a sturdy and elegant solution for mounting your topcase. Constructed from high-strength, lightweight aluminum for durability, they are bike-specific and shaped to accentuate the lines of your motorcycle. Three mounting points for Quick-Lock fasteners in the center of the ALU-RACK allow attachment of removable adapters to fit most Topcases, an SW-MOTECH Quick-Release Soft Luggage Carrier, or an SW-MOTECH ALU-RACK QUICK-LOCK Tankring for fitting flat-bottom SW-MOTECH Bags-Connection Tankbags such as the QUICK-LOCK EVO Sport Tankbag or the QUICK-LOCK EVO Daypack Tankbag.

Adapter plates are available to fit the following Topcases

  • Givi Monolock
  • Givi Monokey
  • TraX ALU-BOX
  • Pelican
  • DrySpec
  • Shad SH26, SH29, SH32, SH33, SH37, SH40, SH42, SH45 & SH46 (not SH48, SH49 or SH50)
  • Kappa
  • Hepco-Becker
  • Coocase

Fits all EX250-F and EX250-G models, including:
1988-2007 Ninja 250R / ZZR250 (U.S. model)
1988-1999 Ninja 250R / ZZR250 (Canadian model)
1988-1992 GPX-250R (U.K. model, years are approximate)
1988-199? GPX-250R and GPX250R-II (Japan model, years approximate)

Does not fit EX250-E, EX250-H, EX250-J, and EX250-K models, including:
1986-1987 models in all markets worldwide
2000-2007 EX250-H Canadian model
2008 & later U.S. and Canadian model (EX250-J and EX250-K models)

Customer Reviews
Review by wendyjboss
Rating
I bought this rack about two weeks ago. It seemed simple enough to attach with just six screws, but it was deceptively difficult. There are two screws under the passenger grab rail that are almost impossible to get tight if you follow the pictorial directions sequentially. I left all my bolts loose as the instructions said, but I was not happy when i got to that step and found out the above issue. I ended up readjusting the rack so that it sat wider at the tail and that helped. However, the top attachment then goes on harder and you have to deform the rack by pushing hard to get the front bolts through. Knowing these gotchas will get you through. Also have a torque wrench on hand. I didn't and ended up snapping one of the top rack bolts. The rep at twisted throttle was understanding when I called and sent the replacement bolt right away. Also be careful. This is designed to be lightweight so every nut appears to be aluminum. There is a mild danger of stripping otherwise. If I added up the time to install, I'd say it took me about 4-6 hours. That includes adding the top case adaptor which uses a locking bolt that I could not get through the provided snapping washer. I ended up ditching the washer and it went in just fine.Trial run is today... I'm glad to have found this rack here because it frees me up to stop using the bicycle panniers that I adapted for the motorcycle - an acceptable, but not ideal solution. (Posted on 5/14/16)
Review by joo lied
Rating
Much searching to find a toprack for the elderly GPX250 here in Australia - no luck. Local garage said that this is the best product they have seen so go ahead and buy. Twisted Throttle had proper pictures and reviews (not just generic pictures of any old rack) so that I feel confident I have ordered the right product - important when paying all that freight to Australia! Looking forward to it's arrival! (Posted on 5/7/16)
Review by teleboy
Rating
"6 bolts, easy install," I thought. 2 hours later, I was able to catch my breath.

The first screw is the awkward one, hiding on the bottom side of the sissy bar (L and R), and the rack/bike body leave little to no room to access this. to get it in, you'd need a skinny flexible socket wrench. But the satisfaction of having the top rack and Givi box on solid outweighed the hassle. (Posted on 9/1/15)
Review by Superfunkomatic
Rating
The rack an adapter plate installed without any problems. A great product all around, very happy with it and also the service from Twisted Throttle. (Posted on 6/13/15)
Review by Glenn
Rating
Waited for *years* for this product. Nicely finished metal parts, good instructions, and the fit is perfect.... only one issue; the bolt that attaches the rack to the underside of the stock grab rail is rather a pain to get in properly. Aside from that, a beautiful piece of kit, and solid as the proverbial masonry outbuilding. (Posted on 6/4/13)
Write Your Own Review

Only registered users can write reviews. Please, log in or register