Cart - $0.00

You have no items in your shopping cart.

YouTube Facebook Twitter 855-255-5550 Email Us

DENALI Plug-N-Play Wiring Kit for Denali SoundBomb Compact & Split Dual-Tone Air Horns & Stebel Air Horn

DENALI Plug-N-Play Wiring Kit for Denali SoundBomb Compact & Split Dual-Tone Air Horns & Stebel Air Horn

SKU: DNL.ELC.10000

In stock


Easy and inexpensive Plug-N-Play wiring kit for Denali SoundBomb Compact Dual-Tone Air Horn & Stebel Air Horn that does not require any cutting, soldering, slicing or crimping as long as the original horn has blade-style electrical connections. Clip one lead to your original horn trigger wire, one lead to battery ground, one lead to battery positive, and plug in your horn's relay.

If the original horn does not have blade-style electrical connections, the original horn connector needs to be removed and replaced with female spade connectors in order to use this harness. If your BMW does not have spade connectors please order the DENALI wiring adapter for BMW motorcycles (in the drop down menu above) to avoid modifying your wiring harness.

For use with Stebel Air Horn & Denali SoundBomb Compact Dual-Tone Air Horn, but can also be used with other replacement horns.


  • No cutting, soldering or crimping for application with blade style horn connections
  • Extra connections for custom applications
  • 5.5ft harness length
  • 30amp Mini inline fuse
  • Inline relay socket
  • Protective vinyl sheath
  • Weather resistant


  • Complete Harness with inline fuse and relay plug as well as pre-connected ring terminals and female blade connections
  • 2 posi-tap inline wire connectors for custom applications
  • 2 male blade crimp on connectors for custom applications
  • 2 female blade crimp on connectors for custom applications
  • 4 wire zip ties
  • 30amp Mini Fuse for pre-connected inline fuse holder


  • Motorcycles with blade style horn wire connections

Please Note: A 5 Pin relay is not included with this kit. A relay is provided with the purchase of a DENALI SoundBomb Compact & Split horn. If using this harness with another horn, please use this 5 pin relay.


Customer Reviews
Review by TheOldNewb
Near perfect harness. All wires are plenty long enough if you route along the factory wiring harness. In fact, they are way too long in most cases. You will have to be creative in securing the extra wiring (the only downside). I cannot say it was quick to route and secure the wires onto the bike but the connections themselves are flawless and very fast. Not having to worry about cutting, stripping, splicing, and crimping made it worthwhile. (Posted on 2/18/2016)
Review by Captrjm
Positive wire was way too short and wires to stock horn much too long for Multistrada (Posted on 1/3/2016)
Review by Sandy
Third horn on a bike and while someone with the bits pieces and parts could do the same thing cheaper, I do not have electrical pieces laying around like I have other common hardware. This wiring and the bike-specific bracket may cost you near the cost of the horn, but what is your time worth? The right bracket and this wiring setup makes installs a breeze. So just get it and make preemptive noise at intersections and blind turns. These wires to a Stebel horn is guaranteed to stop the text-while-driving m*r*ns. (Posted on 10/15/2015)
Review by Batman
i bought the denali sound bomb and wiring harness. Very easy to install however they include a small ground wire separate from the harness. there was no easy access to a grounding screw. had to use a longer wire to go to battery. don't know if this is prevalent or not. the denali horn sounds like the hold 68-72 dual horns that Cadillacs had back in those days. (Posted on 8/15/2015)
Review by tew47
I have had several air horns before and the Plug-N-Play made the easiest one to install by far. It just took a few minutes and I was done!!! (Posted on 6/17/2015)
Review by Superfunkomatic
Last 2 were from Twisted Throttle. Delivery was very quick. If it's my 5th one I must like them. Sound like a Semi in close quarters and they DO hear you. Strongly recommended. (Posted on 6/12/2015)
Review by coloradotiger
I got tired of the wimpy stock horn on my Triumph Tiger 10505 and installed a SoundBomb horn. This wiring harness kit made it very easy. Simply figure out where you want to mount it, then figure out the wiring path back to the battery, connect, and go!! (Posted on 6/10/2015)
Review by Local
I bought this because it professes to make it so easy. It might be if you already know what to do and how to do it. I, however, do not. Its just a bunch of wires to me. The instructions are useless and there is no web support. (Posted on 6/10/2015)
Write Your Own Review

Only registered users can write reviews. Please, log in or register

Chat with us!