CART
Cart - $0.00

You have no items in your shopping cart.

USD

Barkbusters Single Point Bar End Mount Handguard Kit for 6mm & 8mm Internal Threaded Bar Ends | STM-007 STORM

Barkbusters Single Point Bar End Mount Handguard Kit for 6mm & 8mm Internal Threaded Bar Ends | STM-007 STORM

$104.90
SKU: BB.STM-007-01-BK

Out of stock but more on the way. Order now for fastest delivery.

Email me when back in stock

 

Email Me When Back In Stock

Enter your email below and we'll notify you when it is back in stock.


 

Give your hands and levers a break with Barkbusters Storm S7 wind and weather protection handguards for 6mm or 8mm internal threaded handlebars. These guards are designed to provide you comfort when riding in the elements or through narrow trails where brush can scrape up your hands or whack your levers. When you mount these motorcycle handguards for wind protection on your bike, you will also enjoy not being pegged in the fingers with rocks and branches. Oh, and they look cool. 

Barkbusters Motorcycle Handguards Explained

 


Features:

  • Fits 6mm or 8mm internal thread handlebars
  • Single point mounting system
  • Aluminum mounting frame
  • Not designed for impact protection
  • Easy installation
  • Tough and weather shielding Storm handguards
  • Compatible with Barkbusters VPS or CARBON deflector guards
What's in the box:
    • Left and right aluminum single point mounting bars
    • Outer handlebar mounting hardware for both sides
    • Left and right Storm plastic handguard deflectors
    • Installation instructions
Note: For installation on the Yamaha FZ-07 '14-'17 or Yamaha FZ-09 '13-'16, order the Barkbusters B-083 Bar End Adapter Kit.


Barkbusters Handguard Kits
Designed and manufactured in Australia since 1984, Barkbusters' superior design and quality are world renowned. Multiple, single and two point mounting systems are available as well as a variety of guard designs providing Barkbusters Handguard Kits that fit most motorcycles and meet your exact needs.

JET for Dual Sport, Enduro and Trail motorcycles

JET Handguard Kits feature impact resistant replaceable plastic guards as well as two-point heat treated aluminum mounting backbones for superb impact protection or single point bar end mounts to provide weather protection.

245mm (9.6in) wide and 110mm (4.3in) tall, JET guards are interchangeable with VPS, STORM and CARBON guards, and are available in Black, Blue, Green, Orange, Red, White or Yellow.

If purchasing backbones and guards seperately, here are the JET Guards a-la-carte. 

VPS for Adventure, Enduro, Motocross, Street and Supermoto motorcycles 

VPS Handguard Kits feature high-impact resistant replaceable plastic guards as well as heat-treated two-point aluminum mounting backbones for superb impact protection or single point mounts to provide weather protection. VPS-MX Handguard Kits are open ended guards specifically designed for competition motocross.

250mm (9.8in) wide and 105mm (4.1in) tall or 130mm (5.1in) tall with deflector, VPS guards are interchangeable with JET, STORM and CARBON guards, and are available in Black, Black on Black, Blue, Green, Orange, Pink, Red, Silver, White or Yellow. 

If purchasing backbones and guards seperately, here are the VPS Guards a-la-carte.

STORM for Adventure, Cruiser, Scooter and Street motorcycles

STORM Handguard Kits feature replaceable large guards that provide extra wind and element protection as well as heat treated two-point aluminum mounting backbones for superb impact protection or single point mounts for weather protection.

275mm (10.8in) wide and 170mm (6.7in) tall, STORM guards are interchangeable with JET, VPS and CARBON guards, and are available in Black.

If purchasing backbones and guards seperately, here are the Black Storm Guards and the White Storm Guards a-la-carte.

CARBON for Street motorcycles
CARBON Handguard Kits feature genuine hand laid carbon fiber guards as well as heat treated two-point aluminum mounting backbones for superb impact protection or single point mounts for weather protection. CARBON Handguard Kits are not recommended for off-road applications.

250mm (9.8in) wide and 120mm (4.7in) tall, CARBON guards are interchangeable with JET, VPS and STORM guards, and are available in Black Carbon Fiber.

If purchasing backbones and guards seperately, here are the Carbon Guards a-la-carte.

EGO for Enduro, Trail and Mini motorcycles

EGO Handguard Kits feature high-impact resistant replaceable plastic guards coupled with a heat treated two point aluminum mounting backbones to produce one of the world’s toughest and most durable handguards. The compact curved profile of the bars and guards provide added strength and also allow for tighter trail riding. EGO Mini Handguard Kits are 20mm shorter making them ideal for small motorcycles.

EGO guards are available in Black, Blue, Green, Orange, Red, White and Yellow.

EGO guards are not compatible with standalone Barkbuster Backbone Aluminum Handguard kits.

BBZ for Adventure, Cruiser, Scooter and Street motorcycles

BBZ Handguard Kits feature large fabric guards lined with a waterproof and windproof membrane that provide excellent foul and cold weather protection. BBZ handguards have a universal mounting system that can be fitted over existing Barkbusters Handguard Kits or independently to most motorcycles.

325mm (12.8in) wide and 170mm (6.7in) tall, BBZ guards are compatable with most motorcycle handlebars.

Manufacturer # STM-007-01-BK
Customer Reviews
Review by Guest
Rating
Ordered the set yesterday and received today. It took 20 minutes to install. Looks good on my R1200RS. I will test them monday , the weather will be around 6 C . I have heated grips but the wind was freezing the top of my hands. This set should solve a big part of the problem. (Posted on 10/31/2018)
Review by Guest
Rating
These are nice pieces. They installed easily on my 2008 FJR1300.
I went on a 4 hour ride with temps between 25 and 60 F shortly after installing them. Although they diverted some of the windblast from my hands, they where not as effective as the handguards on some other bikes I've ridden. It seems that they need to be taller, particularly the end toward the center of the bike. That part tapers thinner and quite a bit of air pours over and under the guard and hits your hands. I also found that the inner end of the guard was about 1.5" further away from the bars than necessary. I removed the guard and mounting bar (easy) and bent the mount to pull the inner end in close to the bars. This helped block the wind slightly better, but still not enough to keep my hands warm, even with grip heaters. (Posted on 5/2/2018)
Review by Guest
Rating
I had purchased the Barkbuster kit for my FZ-07 and was unaware of the additional
items required for installation. (I didn't read the catalog information.) I called Twisted Throttle and spoke to Matthew who knew immediately what I needed and sent it the same day. Kudos to both Twisted Throttle and to Barkbusters, the former for their promptness and the latter for their product with particular note for the detailed instructions included. Thanks to all. (Posted on 1/31/2018)
Review by Guest
Rating
Although I have heated grips I wantwd more protection below 45 degrees. Last ride mid 30's to 45 in thick fog. Hands stayed warmer and dry. Great addition to bike for winter riding and only one bolt to remove. (Posted on 1/23/2018)
Review by Guest
Rating
I bought these Barkbusters for my Piaggio MP3 500cc to keep wind and cold air off of my hands. They are a very good value for a solid product and were easy to install. (Posted on 10/25/2017)
Review by Guest
Rating
I went from a VStrom that I had put these on. Last year a changed to an FJR. I got caught in some nasty weather and realized how much these helped. I have now put a set on the FJR with no regrets. (Posted on 7/22/2017)
Review by Guest
Rating
Spyder F3 owners be advised: If you have installed Can-Am's heated grips, these Barkbusters will not fit properly. (Posted on 2/23/2017)
Review by Guest
Rating
Perfect for street application and v easy install. (Posted on 1/29/2017)
Review by Guest
Rating
I bought these for my 2015 street triple. They are quick and easy to install (15 min). I wanted wind protection for my hands on the cold mornings. They do help some. But my hands still get cold when the temp drops to the low 40s, even though I have winter gloves on. The hand guards look good on the bike. The only downside is they only come with 1 plastic attachment for each guard but they are made to take 2. This doesn't seem to affect it, but I'm worried if that 1 little plastic piece beaks, I will lose the guard. I may make my own and attach it to the other holes. (Posted on 1/26/2017)
Review by Guest
Rating
Good product, easy installation. Use to keep my HippoHands in place (Posted on 12/26/2016)
Review by Guest
Rating
installation is easy once you figured the combination of screws. i recommend to purchase the FZ adapters for perfect fit installation. only complain is the right handguard is kind of loose and have some scratches. (Posted on 10/22/2016)
Review by Steve
Rating
Fit my 2012 Kawasaki Versys perfect. Easy installation. (Posted on 5/2/2016)
Review by speedy
Rating
superb fit and finish, easy to install and very effective. no more rocks hitting my hands. I plan to add the flashers in the near future. (Posted on 4/14/2016)
Review by kensninja
Rating
I ordered these a few weeks ago for a 2014 Ninja 1000. TwistedThrottle's on-line ordering said they were out of stock but they shipped the next day.

Installation took all of 15 minutes and they fit perfectly on the Ninja. After a few hundred cool, damp miles I can say they do exactly what I needed them to do - keep that cool damp wind off my hands. My preference is thin deerskin gloves but they simply aren't reasonable here much of the year, even with grip heaters. These deflect the cold wind and dampness enough to allow using these gloves.

I also like the single ended design. Strong enough for all normal use but they'll break away before breaking your arms if there's an accident. (Posted on 2/29/2016)
Review by eedly
Rating
They went on easily, keep the rain off, haven't needed adjusting, and don't look horrible. I wish I had the option of something better than single-point attachment, but that's a shortcoming of my R850R's non-round bolt-on handlebars. It's great that there's a product that accommodates this.

My one issue for TT is that the S7 handguards don't seem to show up on the webpage when I filter by Handguards or Barkbusters. I initially ordered the S5 model, which didn't fit my bike. TT support was very helpful and got me on the right track, however! (Posted on 11/13/2015)
Review by shoppy
Rating
Wanted to add some extra wind protection and options to do this on current gen FJRs seem pretty limited however the Storm S7 goes straight on with no issues at all.

Some interference at extreme lock however as the S7s don't have an inner bracket they just flex out of the way so no concerns there at all. Contact is minimal as well.

Very high quality product and very pleased with them. 15 minute install once you identify the right length bolt to use - everything in the kit you need though. You do loose the stock bar ends using these but there is still a fair bit of weight for the fitment kit so no concerns about bar vibration being any worse, not that this is an issue on the FJR anyway in my experience. (Posted on 2/17/2015)
Review by STL
Rating
Bought these to block wind off my hands in cold weather and the prove to do that well. Fit perfection my 04 BMW R1150R. (Posted on 11/14/2014)
Write Your Own Review

Only registered users can write reviews. Please, log in or register

Chat with us!