Cart - $0.00

You have no items in your shopping cart.

YouTube Facebook Twitter 855-255-5550 Email Us

Techmount 10mm Mirror Mount (Left or Right Side), black (Discontinued)

Techmount 10mm Mirror Mount (Left or Right Side), black (Discontinued)

SKU: TM.31000

Sorry, but this item is no longer available.

Note: The Techmount 10mm Mirror Mount (Left or Right Side), black has been discontinued and is no longer able to be ordered.

Mirror Mounts are designed to thread into the un-used mirror mounting holes found on many metric motorcycles. Threads into any 10mm x 1.25 standard. Includes both standard (right hand) or reverse (left hand) thread pitch adapter.

  • ZC600 Ninja 600R '91-'97
  • ZX1100 GPz 1100 '95-'96
  • ZX1100 GPz 1100 ABS '95-'96
  • ZX1100-C Ninja ZX-11 '91-'93
  • ZX1100-D Ninja ZX-11 '93-'01
  • ZX1200 Ninja ZX-12R '01-'10
  • ZX1200 Ninja ZX-12R 1996
  • ZX1200 Ninja ZX-12R 1993
  • ZX1400 Ninja ZX-14R '06-'10
  • ZX600 Ninja ZX-6 '93-'06
  • ZX600 ZZR600 '03-'10
  • ZX750 Ninja ZX-7 '91-'95
  • ZX750 Ninja ZX-7R '91-'96
  • ZX750 Ninja ZX-7RR '91-'03
  • ZZR1200 '08-'10

  • FJR1300 '03-'10
  • FZ1 '05-'05
  • FZR1000 '91-'95
  • FZR600R '91-'99
  • GTS1000A '93-'94

Since many motorcycles have fairing mounted mirrors and manufactures commonly share the same handlebar controls between models, the original mirror hole locations are often unused. This provides a good solid mounting location for electronic devices. Mirror Mounts are good choice for motorcycles with hard to fit or limited handlebar space. They also provide a secure, easy to reach mounting location. A great choice for devices that should be mounted within a short reach from the grips. Such as radios, MP3 players, cell phones or GPS equipment.
This is another of our 3rd generation mount systems, which means that it is interchangeable with any of the 2010 TechMounts. This kit combines the Left and Right hand threaded mirror bases (10mm x 1.25 thread pitch) into one mount kit. This kit will fit both the left or right side mirror holes found on many metric motorcycles. Mirror Mounts have all the adjustability and range of movement of all other TechMount systems. Installation is easy, simply thread the mounts hex shaped base into the unused holes on the mirror perches. This kit is available in anodized black. It’s a great choice for an off-center location many Japanese and European bikes. This more universal fitment means lower inventory cost, easier to explain and fewer returns.. Having no need for a shaft, makes this the most compact mount possible. Accessory shafts and holders are available to add even more mounting flexibility.
Kit includes: left and right bases, installation tools and instructions.
New Side Grip/Pin Base Design:
•Allows 360° of rotation without removing any part of the mount. Much easier to make small adjustments with the device in place.
•Improved rotational grip (no unwanted side to side movement).
•Allows the entire upper portion of the mount to be removed easily by removing one bolt and then installed onto another bike or stored for later use.
•Customer can purchase just the base for another bike and move the GPS or other accessory from bike to bike easily. Less expensive (more desirable) for the customer with multiple bikes.
Inter-locking Pivot Design:
•Makes the mount more compact. No shaft required.
•No slippage over rough terrain.
•Inter-locking pin acts as a shear pin in the event of an accident. Allow the device to move out of the way without being lost.
Round Top Plate:
•More compact, allows less plate showing with device installed.
•Always straight, no angles to clash with the device cradle alignment.
•Center and off-set mounting holes, allows the top plate to be mounted centered or off-set as well as to be rotated 360° independently from the rest of the mount.
•Safer, no sharp angles.
•Has built in counter-rotation pin for added security. Won’t droop or sag over rough terrain.
•Pre-drilled with the industry standard 4 hole mounting pattern (AMPs) and a camera thumbscrew hole.
New Hybrid Shaft Design:
•Combines pivot shaft strength with ball/socket flexibility.
•Simpler to install.
•All shafts have counter-rotation pins for added security.
•One shaft fits all TechMounts, makes purchasing extension shafts less confusing.
Manufacturer # No
Write Your Own Review

Only registered users can write reviews. Please, log in or register

Chat with us!