CART
Cart - $0.00

You have no items in your shopping cart.

USD

DENALI B6 Auxiliary LED License Plate Brake Light

DENALI B6 Auxiliary LED License Plate Brake Light

$95.00
SKU: DNL.B6.10000

In stock


 

The B6 LED brake light was purpose built to create the most amount of light from the most compact, low-profile housing possible. Six 1-watt Light Emitting Diodes generate improved visibility with minimal bulk. Newly updated to operate as both a brake light and running light, the B6 provides enhanced functionality on conventional motorcycles as well as those that can use the advanced features of the CANsmart Controller (sold separately). Note that flash patterns and deceleration activated “auto brake light” functionality is only available when used in conjunction with the DENALI CANsmart Controller.

NOTE: Not compatible with any KTM Super Duke Models

DENALI B6: Building a Better Brake Light

 


Features:

  • Six extremely bright LEDs
  • Low 6 watt power consumption
  • Running light
  • Brake light
  • License plate light
  • Low profile design
  • Easy to wire to existing brake and running light circuits
  • Compatible with DENALI CANsmart Controller (sold separately)

Additional Features with DENALI CANsmart Controller:

  • Deceleration activated brake light (sensitivity adjustable)
  • Burst flash brake light (adjustable)
  • Plug & play installation without modifications

What's in the box: 

  • DENALI B6 license plate LED brake light
  • M6 Mounting hardware
  • (1) Wiring pigtail
  • (3) Posi-Taps

Installation notes:

  • For conventional installations, use the supplied Posi-Tap connectors to connect the black wire to ground; the red wire to the tail or running lights; and the orange wire to the brake-light circuit.
  • For DENALI CANsmart or similar accessory controller installations, connect the orange wire to the orange controller wire and the black wire to the black controller wire on the pigtail harnesses using the Posi-Lock connectors provided with the CANsmart product. The red wire is not used in this application.

Manufacturer # DNL.B6.10000
Customer Reviews
Review by Guest
Rating
For a KTM 1090 adv r I bought the Y splitter, plugged it in between the stock tail light and harness connectors, cut off the open Y splitter connector, and soldered in the B6 pigtail leads to the cut connector wires, joining the red to black and black to red leads. The orange (brake) leads mate together. Remember to slip on the heat shrink tubes before you solder! (Posted on 2/16/2019)
Review by Guest
Rating
I just purchased this kit for my KTM 950 ADV. Installation was quick and painless with the included pigtail adapter. Took about 20-30 minutes to install and reroute all of the wires and everything properly. The unit is small and easy to mount to the existing lower license plate bracket. (Posted on 9/24/2018)
Write Your Own Review

Only registered users can write reviews. Please, log in or register

Chat with us!