CART
Cart - $0.00

You have no items in your shopping cart.

USD
YouTube Facebook Twitter 855-255-5550 Email Us

DENALI D2 2.0 TriOptic LED Light Kit with DataDim Technology

DENALI D2 2.0 TriOptic LED Light Kit with DataDim Technology

$350.00
SKU: DNL.D2.10000

In stock


 

The DENALI D2 2.0 LED TriOptic™ LED light kit with DataDim technology produces a remarkable amount of light in a very compact package that is perfect for all styles of riding and types of motorcycles. With a powerful 10-watt Cree LED, the DENALI D2 casts a powerful beam 525ft down the road.

DENALI 2.0 Installation and Operation

 




Housed in compact aluminum pods measuring just 2.2in in diameter and 2.4in deep, the D2 LED lights are perhaps the most versatile design available; powerful enough to be your “primary” driving light yet small and light enough to comfortably mount on a fender. The DENALI D2s feature durable black powder-coated finishes and special cooling fins to make sure the LED itself runs cool and bright. New for the DENALI 2.0 series is a special Impact PC™ corrosion proof bezel that ensures your lights will continue to look great even after repeated stone and debris impacts. Low profile hinge mounts offer secure mounting and include stainless steel M8 mounting hardware for installation on light bars or model specific light mounts.

The D2 2.0 kit uses a just-developed HotSwap™ modular wiring harness that, by default, causes these single intensity lights to function at full brightness. But if you would like them to operate at both half and full power, simply add the dual intensity DataDim™ controller. No other changes are required except to replace the original relay with the DataDim™ module and connect one wire to the high-beam circuit. (You can also purchase a three-position switch to manually control light intensity independent of the bike’s high beam.)

Also new with the DENALI 2.0 generation of lighting is the industry-leading TriOptic™ lens system. Each lamp comes with both spot (installed) and flood (supplied) lenses, nothing else to buy. The spot lens produces the greatest beam distance, while the flood lens produces a broader spread of light closer to the motorcycle, filling the road edge and shoulders. To get the best of both worlds, use a spot lens on one light and a flood lens on the other light for distance illumination and a useful spread of light at close range. The flood lenses are E-Marked to be road legal in countries where this is a requirement. No matter which lens you choose, the D2 2.0 light kit lets you see the road (or lack thereof) and be seen by other traffic around you. It’s that simple: See further, be seen better, with DENALI!

Specifications:

  • LEDs 10 Watt Cree XPL HI (per lamp)
  • Power Draw: 1.6 amps (total)
  • Beam Distance (spot): 525ft
  • Beam Width (spot): 75ft
  • Raw Lumens: 2190
  • Intensity: Single Intensity Harness
  • DataDim™ Compatible: Yes
  • Operating Voltage: 12v
  • Pod Size 2.2in diameter x 2.4in deep

D2 Kit Contents:

  • (2) LED Light Pods
  • (2) Spot lenses (pre-installed)
  • (2) E-Mark approved elliptical flood lenses
  • (1) HotSwap™ single intensity wiring harness
  • (1) DrySeal™ waterproof illuminated switch
  • (1) 7/8in Handlebar switch mount
  • (1) 1in Handlebar switch mount
  • (2) Hinge mounts with M8 stainless steel hardware
  • (4) Zip ties & (1) adhesive mounting square


DENALI 2.0 LED Auxiliary Lighting Guide
Designed specifically for motorcycles, the DENALI 2.0 LED TriOptic auxiliary lights with DataDim technology maximize visibility in an extremely durable, efficient, compact yet very powerful package. The DENALI 2.0 product line carries a 5-year warranty.

 

 DENALI 2.0 LED TriOptic Auxiliary Light Kits
TriOptic lenses feature spot and either flood or hybrid options to customize your illumination needs while DataDim technology provides dual intensity with the addition of a plug and play module. With black powder coated cooling fins to keep the LEDs cool and operating at full strength, an Impact PC corrosion proof bezel protecting the front of the lights from stone chips, and DrySeal submersible waterproof construction, your way will be clear no matter the conditions.
DENALI DM 2.0 LED Light Pod DENALI D2 2.0 LED Light Pod DENALI DR1 2.0 LED Light Pod DENALI D4 2.0 LED Light Pod
DENALI DM 2.0
LED TriOptic Light Kit

395ft maximum range
2190 raw lumens
1.7in width
1.6 amp total draw
Includes spot & flood lens

DENALI D2 2.0
LED TriOptic Light Kit

525ft maximum range
2190 raw lumens
2.2in width
1.6 amp total draw
Includes spot & flood lens

DENALI DR1 2.0
LED TriOptic Light Kit

1000ft maximum range
2190 raw lumens
3.7in width
1.6 amp total draw
Includes spot & True-Hybrid lens

DENALI D4 2.0
LED TriOptic Light Kit

800ft maximum range
8760 raw lumens
3.9in width
6.6 amp total draw
Includes spot & True-Hybrid lens

DENALI 2.0 Light Specific TriOptic Amber Lens Kits
DENALI 2.0 TriOptic amber lenses are an optional accessory for added daytime visibility and fog-cutting performance. Each kit includes a set of amber spot lenses as well as a set of amber flood or True-Hybrid lenses, allowing you to select one or both options to customize your illumination.
DENALI DM 2.0 Amber Lens Kit DENALI D2 2.0 Amber Lens Kit DENALI DR1 2.0 Amber Lens Kit DENALI D4 2.0 Amber Lens Kit
DENALI DM 2.0
Amber Lens Kit

Replacement lens kit
Includes spot & flood lens

DENALI D2 2.0
Amber Lens Kit

Replacement lens kit
Includes spot & flood lens

DENALI DR1 2.0
Amber Lens Kit

Replacement lens kit
Includes spot & True-Hybrid lens

DENALI D4 2.0
Amber Lens Kit

Replacement lens kit
Includes spot & True-Hybrid lens

DENALI 2.0 TriOptic LED Light Kit Accessories
DENALI 2.0 accessories expand the functionality of your existing DENALI 2.0 TriOptic Light Kit
DENALI DataDim Controller DENALI Hi-Low-Off Waterproof Switch DENALI 2.0 Y-splitter Kit DENALI 2.0 Light Harness Extension
DENALI 2.0 DataDim
Dual Intensity Controller

Plug this module into your DENALI 2.0 TriOptic Light Kit to allow switching between full and half intensity with your high beam switch

DENALI 2.0 Hi-Low-Off
Waterproof Switch

Replace the standard On-Off switch in your DENALI 2.0 TriOptic Light Kit to enable independent control of your DataDim Dual Intensity Controller

DENALI 2.0 Y-Splitter Kit
Allows installation of a second pair of DENALI 2.0 TriOptic Light Pods on your existing DENALI 2.0 TriOptic Light Kit



DENALI 2.0 Light Harness Extension
Single 24 inch plug and play harness extension allows expansion of your existing DENALI 2.0 TriOptic Light Kit mounting options

DENALI DRL and Brake Light Options
DENALI DRL and brake lights were built to create the most amount of light from the smallest, slimmest housing possible
DENALI DRL Daytime Running Lights With Universal Offset Mounting Kit DENALI DRL Daytime Running Lights With Universal Fender Mounting Kit DENALI B6 Flush Mount LED Auxiliary Brake Light DENALI B6 Dual License Plate LED Auxiliary Brake Lights
DENALI DRL Daytime Running Lights With Universal Offset Mounting Kit
Designed for fitting a pair of DENALI DRL pods to the side of any M6 hardware mounting point on your motorcycle 

DENALI DRL Daytime Running Lights With Universal Fender Mounting Kit
Designed to mount a pair of DENALI DRL pods on the front fender of your bike


DENALI B6 Flush Mount LED Auxiliary Brake Light
Designed to mount a single B6 Pod to any flat surface on your vehicle




DENALI B6 Dual License Plate LED Auxiliary Brake Lights
Designed to mount to either side of your license plate




Understanding DENALI 2.0 Wiring

 


Manufacturer # DNL.D2.10000
Customer Reviews
Review by Guest
Rating
Timely delivery and everything needed for installation was there. Had dealer install and they commented on the quality and effectiveness of the additional lighting. Had the flood lens installed on the left engine guard and the pencil beam on the right. Definitely hard to miss. The dimming/low beam feature is great for in town riding. (Posted on 6/25/2018)
Review by Guest
Rating
For 20 watts, these put a useful amount of light on the road. I attached to the fender mounts for my Suzuki Burgman 650. The mounts were very clean and easy to bolt on. I have the lights configured with 1 spot and 1 flood lens.
The wire harness, though, is grossly over-engineered. It includes a separate branch with a switch, a separate branch with a relay, a connector in case you want to buy another harness and switch to add the Data-Dim feature, and a fuse. When I wired it up, the excess was much too thick and long to tuck neatly under the bodywork. And I still needed to solder an extra 6 inches onto the power leads, which were inexplicably short.
Particularly for a bike that has the excellent Denali PowerHub, all that's needed is a single pair of wires with an in-line switch and a short Y with connectors for the 2 lights. The PowerHub has the fuse and the relay already. When I have some spare time, I'll cut away most of the harness and solder a simple pair of wires to what's left. (Posted on 4/30/2018)
Review by Guest
Rating
Excellent directions for installation. On my bike I had to fabricate a mounting bracket, but everything went together nicely. Good light for the size, excellent daytime visibility, decent nighttime range. Plus the delivery was quick and service excellent. (Posted on 4/14/2018)
Review by Guest
Rating
We installed these on a customer's Kawasaki KLR650. The lights went right on, and after a night-time ride the customer reported "It's like daylight out there!" (Posted on 3/8/2018)
Review by Guest
Rating
Bought these to augment the Cyclops LED headlights and factory fog lamps I installed on my 2017 Tiger Explorer XRT.
They do a better job of lighting up the road than the LED headlights!
Installation was fairly straightforward, but to route the wiring required removal of the gas tank, which is a bit of a job on the Explorer.
The wiring harness is high quality and strong, although the connection for the DataDim relay pointed in the wrong direction for me, making the routing of the wiring uneccessairly long.
I may add the DataDim unit later, and set these up for high/low beam automatic operation, but for now I am content with the high beam only operation with the manual switch. (Posted on 1/28/2018)
Review by Guest
Rating
I bought the Denali d2 lights. Purchased the ez canbus to connect everything all together on my 2014 r1200gs .installation was not too bad .when all connected the brightness of these lights cannot be beat for there size .Another satisfied customer. (Posted on 1/19/2018)
Review by Guest
Rating
I bought the lights and my experience didn't end there. I was almost lead to what I needed to get for my bike and the support people helped me million times by guiding me thru what exactly I needed for my bike. I am embarrassed, but, ever this worked as they recommended. (Posted on 12/10/2017)
Review by Guest
Rating
I bought these lights because of the LEDs, the size and the swappable lenses . I put lights on all my bikes because of night riding and country roads, but my 2016 Triumph T120 needed special help, the high-beam is almost useless.
They tucked up nicely inside the top outside corners of the engine guards, hanging from rubberized P-clamps to quell vibration. The wiring is super easy to hook up and run. I wired mine into the USB charger under the seat.
I use the high/low beam controller and switch, because part of Triumphs "go your own way" ideology is not using the front turn signals as running lights like the other manufacturers. The lights on low beam take care of this. I ride in a lot of fog in my commute at times, on dirt roads dodging horses, buggies, deer and other animals, so I use the amber lenses with the flood beam on the left and the spot on the right.
Whether on high or low, they throw a really nice, bright beam, with a good pattern. I really am glad I chose these particular lights.
My only niggling complaint is with the switch, for 2 reasons. The first is that I am not a fan of the mounting system, with the 2 small screws kitty-corner top and bottom. Those tiny screw heads stripped out before getting the switch tight enough to hold on a chrome tube handlebar. Larger screws and the double-sided tape supplied with the switch inside the clamp fixed that. The other is that the switch is small enough that it can be difficult to lock into the on position with heavy gloves.Other than that, these lights are bang-on perfect for my needs. (Posted on 11/28/2017)
Review by Guest
Rating
How to instal in a GSA1200 2017. the double intensity don t work (Posted on 11/16/2017)
Review by Guest
Rating
My Multistrada does a great job out of the crate in terms of illuminating the road for night riding. But these little LED's fill out the view going around corners and it really helps.

It is easy to adjust them with the brackets TS sell, so you can angle them to avoid blinding oncoming traffic without really compromising their effect on illuminating dark roads.

I am really happy with these lights. I've ridden with them from New England to British Columbia. I have no complaints. They are durable, reliable, and low profile. (Posted on 8/14/2017)
Write Your Own Review

Only registered users can write reviews. Please, log in or register

Chat with us!