Cart - $0.00

You have no items in your shopping cart.


Galfer Steel Braided Brake Line Kit for Suzuki DL650 V-Strom '12-'16 | Front +2in ABS

Galfer Steel Braided Brake Line Kit for Suzuki DL650 V-Strom '12-'16 | Front +2in ABS

SKU: GAL.FK003D772.3+2

Limited stock

Only 1 left


Galfer stainless steel brake lines greatly improve braking effectiveness! Stock lines are typically made from rubber that expands when the brakes are applied. Steel braided lines are designed to minimize expansion under pressure, which provides a firm, consistent feel at the lever for improved feedback and control. Less expansion also means that less lever force is required to achieve maximum braking power for reduced stopping distances.

Galfer has been a leader in stainless steel brake line kits for over 60 years. Galfer USA employees are all motorcycle enthusiasts who understand the needs of riders.

Galfer stainless brake line kits are made with a DuPont Teflon® inner core encased in a 64 strand braided steel outer casing and wrapped in a UV resistant PVC coating. These are top-quality lines that you can trust!

  • Made in the USA
  • Lifetime manufacturer's warranty
  • PTFE Teflon®
  • 64 lines of steel braid
  • Pre-positioned banjos for easy installation (adjustable as needed by hand)
  • Installation Instructions
  • 2 inches longer than stock to accommodate bar risers or taller handlebars

Please Note: This kit upgrades the front brake lines only.

Suzuki DL650 Vstrom '12 - '16 with ABS

Why do you need steel braided brake & clutch lines for your motorcycle? 

Fitment Note: Galfer designed these lines 2" longer than stock to allow the use of bar risers, taller handlebars or both.

Customer Reviews
Review by Guest
Straight forward installation on my 2012 VStrom once the radiator was lowered an inch. The Extra 2" of length is necessary due to the lack of bends at the banjo fittings. It is not a factory fit but still a clean look and improved brake lever feel. (Posted on 7/3/2017)
Review by Guest
Exact match to the OEM Suzuki lines and even had some extra hardware. Crystal clear instructions. Not to mention three lines for the price of one backordered Suzuki line. (Posted on 5/27/2017)
Review by Guest
The lines themselves seems very well made, no issue here. However, Galfer has made one mistake. The line from the master cylinder to the union under the triple clamp (oil line to ABS unit) is incorrect. The original banjo connector at the lower end has a 90 degree bend manufactured into it. This redirects the brake line forward (it is installed pointed straight down). The Galfer unit does not have this bend. As a result, it is the braided line which must bend to make the 90 degree turn. This adds undue stress, and effectively shortens the useful length of the line. In the end, it works, but only because the line is 2 inches longer. Also of concern, is if the constant bending of the line (when the forks are turned) will cause premature failure?
To note, because of this error, the extra 2 inches of line normally available to accommodate bar risers isn't, as it is wasted making that bend. This is was the primary reason I bought them, so no luck there either.
I got it to work, but it required rerouting throttle cables and electrical wires to allow for a more direct path for the brake line. In the end, all of the above are no longer in their respective factory locations.
This is not Plug and Play.

Can they be used on a 2015 DL650?......Yes.
Do they work?.....Yes.
Do they fit a 2015 DL650 correctly?......No (Posted on 5/14/2017)
Review by Duende
The lines are perfect, the fitment is the same with OEM lines. (Posted on 9/3/2014)
Write Your Own Review

Only registered users can write reviews. Please, log in or register

Chat with us!