CART
Cart - $0.00

You have no items in your shopping cart.

USD

Helmet Guardian, Black

Helmet Guardian, Black

$51.95
SKU: STA.HG.B

Out of stock but more on the way. Order now for fastest delivery.

Email me when back in stock

 

Email Me When Back In Stock

Enter your email below and we'll notify you when it is back in stock.


 

Readily installed on either the upper or lower license plate bolts, this is the perfect accessory for securing your helmet to your bike!

The Helmet Guardian consists of two high quality, spring loaded helmet locks attached to a steel plate that is predrilled with slots ready to attach to most US and Canadian license plates.

Comes in powder-coated black.

Overall width: 11" (279.4mm)
Lock height: 2.5"(63.5mm)

Fits standard North American motorcycle license plate mounts. Not for use with European or United Kingdom motorcycle license plates.
Customer Reviews
Review by Guest
Rating
I had two of this company's locks on my last bike, so I didn't hesitate when I saw this. I love the locking action, and the spring loaded clip so you can leave it open and just snap your helmet in when you stop. However, the plate between the two locks is extremely flimsy and, in fact, mine was bent on arrival. I can't help thinking it wouldn't be too difficult to bend this back and forth until it breaks. Now, I need to buy a steel plate to laminate to the back so I can have any trust in it. Disappointing. (Posted on 4/16/2019)
Review by Guest
Rating
The "K-brand" didn't fit so I tried this. Love it! (Posted on 12/12/2018)
Review by Guest
Rating
No longer have to walk around with your helmets. Great product would definitely recommend. (Posted on 10/4/2018)
Review by Guest
Rating
The helmet stiorage is limited on the new 2018 gdwing. This product mounts easy and fast and holds two helmets (Posted on 9/9/2018)
Review by Guest
Rating
I have 2 bikes and a Helmet Guardian on each. The best way I know to keep a helmet safe when not on my head. It is dirt cheap insurance for the integrity of your helmet when a single fall can ruin that piece of expensive riding gear. If your bike doesn't have helmet locks, you NEED one of these. (Posted on 8/19/2018)
Review by Guest
Rating
Bought my first one for my (then new) '14 Honda CTX 1300 as its OEM helmet holders SUCK and are inconvenient. The Helmet Guard is quite handy and well engineered. As such, when I picked up a nice used '07 ST 1300 a few years back I got one for it as well for same reasons. A month ago I took delivery of my '18 Gold Wing Tour DCT Air Bag. Unlike my previous Wings who's OEM under trunk Helmet Holders which were perfect, this new '18's design are awkward and cumbersome to utilize. So I just bought a 3'rd Helmet Holder and all is well. (Posted on 8/19/2018)
Review by Guest
Rating
Had one on my last bike for 10 years. Used it frequently and always worked flawlessly. New bike, so I added another Helmet Guardian. (Posted on 7/31/2018)
Review by Guest
Rating
I installed it on my bmw r1200rt and it's perfect for short stop (Posted on 7/29/2018)
Review by Guest
Rating
I have a Helmet Guardian installed on my other Motorcycle and I love it! The Helmet Guardian frees up my Top case space for other things (jacket, gloves, etc...) (Posted on 6/26/2018)
Review by Guest
Rating
Few if any modern bikes have a helmet lock - but the Helmet Guardian solves this problem with a slick little attachment to your licence plate bracket. It provides two secure locks so that you and your passenger can leave your helmet on the bike without too much risk. (Posted on 6/22/2018)
Review by Guest
Rating
Goes on easily . A slight bulk but worth it . Works great and is very easy to use & convenient - wonder why I waited so long ? (Posted on 6/11/2018)
Review by Guest
Rating
Essu to install. I have a BMW K1600 and the way my helmets hang on the guardian they touch my hot exhaust pipes. I wish guardian had an accessory to protect helmets from hot pipes. Otherwise it's a great product. (Posted on 6/3/2018)
Review by Guest
Rating
I'm on my second one because I've forgotten the key three times (now I only have one working lock on my bike). Since my wife doesn't want or need the spare on her key chain, which I grabbed without thinking, I had to use bolt cutters that were thankfully available where I parked my bike. I would like to be able to order a new hook from Helmet Guardian and fix it, but haven't found a way to contact them to see if the one part can be replaced, or if I have to buy a third one. I'll be putting the spare key under my locked seat from now on. (Posted on 5/18/2018)
Review by Guest
Rating
This is a great solution for bikes without a helmet lock. Easy install. (Posted on 4/21/2018)
Review by Guest
Rating
It is perfect put those motorcycles where there is no place to put your helmet securely. Install in about 10 minutes. Excellent product. (Posted on 4/13/2018)
Review by Guest
Rating
Have this on my BMW 1200GS. Easy to put on and much easier to use than stock helmet holder!! Very solid with good locks. Took about five minutes to install. (Posted on 3/14/2018)
Review by Guest
Rating
Purchased for a recent road trip with my wife on our BMW K1200GT. Worked great. Very convenient to hold and secure helmets for stops along the way so we didn't have to lug our helmets with us. When not touring we normally just put our helmets inside our hard cases on the bike, but that wasn't an option for our trip as they were full with clothes. (Posted on 3/5/2018)
Review by Guest
Rating
I installed this feature 2-months ago, and it functions as advertised, which is a great addition to my wheels. It was a tight fit, but do-able with a little fussing. Design looks like it would fit and adjust to any bike because of the large slot-holes on the product. (Posted on 11/30/2017)
Review by Guest
Rating
Excellent!!!!
Excellent!!!!
Excellent!!!!
Excellent!!!! (Posted on 11/16/2017)
Review by Guest
Rating
I'm a long time motorcycle driver. I remember when locks used to come standard on bikes. Not this silly cable you have to pull the seat to attach. This product works perfectly - even better than the old ones I remember.
It is secure and uses security fasteners to prevent removal. Locks both helmets easily. (Posted on 10/17/2017)
Review by Guest
Rating
I purchased and installed on my 2016 Yamaha Super Tenere ES. Install was easy. The provided instructions are well written. It did not interfere with my license plate or rear fender at all. It’s discrete. All hardware was of good quality. The locks themselves are adequately secure and have a quality feel when opening or closing. I do use a chrome helmet d loop extender providing additional slack where the D loop hangs from the guardians u Lock. I found this gives just a bit more clearance with this specific bike ensuring the helmet hangs freely/not touching luggage or rear fender. I recommend this if your looking for an easy solution go (Posted on 10/10/2017)
Review by Guest
Rating
It looked a little flimsy online. However, when I got it and attached it to my bike (VRSCA) it worked fine. Plenty solid enough. (Posted on 9/11/2017)
Review by Guest
Rating
Put this on wife's Spyder, holds both our helmets. Good quality, Highly recomend (Posted on 8/24/2017)
Review by Guest
Rating
Bought this to mount on the underside of the rear rack on my Concours to hang helmets and jackets from. Works perfectly (Posted on 7/20/2017)
Review by Guest
Rating
I had two of this company's locks on my last bike, so I didn't hesitate when I saw this. I love the locking action, and the spring loaded clip so you can leave it open and just snap your helmet in when you stop. However, the plate between the two locks is extremely flimsy and, in fact, mine was bent on arrival. I can't help thinking it wouldn't be too difficult to bend this back and forth until it breaks. Now, I need to buy a steel plate to laminate to the back so I can have any trust in it. Disappointing. (Posted on 7/6/2017)
Review by Guest
Rating
Bought this as a way to temporarily lock helmets to bike when in stores, etc. Quick and easy to use. Great product. (Posted on 6/7/2017)
Review by Guest
Rating
I bought this two months ago for FJR1300, 2014. Mounted by the tag. Went on, no problem at all. Works great. (Posted on 3/26/2017)
Review by Guest
Rating
Bought this for my wife's Ducati Scrambler. Now we can keep her helmet with the bike instead of bringing it into the restaurant or wherever we're going. Very well built. (Posted on 3/6/2017)
Review by Guest
Rating
Easy to use Better than The Under Seat Hook that comes on the Bike.. (Posted on 9/18/2016)
Review by Guest
Rating
The mounting holes were incorrect for my 2015 Honda CTX 700n. I had to drill the holes lower to get it to work. Other than that I'm pleased with the product. (Posted on 8/14/2016)
Review by Guest
Rating
Installed on my Honda CTX in minutes.
I use it all the time. Convenient very accessible but nicely tucked away.
I highly recommend this product . (Posted on 8/12/2016)
Review by Guest
Rating
I've installed the helmet guard and it's very secure, works as described (Posted on 7/19/2016)
Review by sonnypoc
Rating
I bought this a few weeks ago for my Honda CTX. I stepped down from a Goldwing that had storage for everything including helmets. The new bike had a difficult lock for one helmet that you had to remove the seat to access. I ride with my wife and this locks up 2 helmets in a snap. The unit is well made and a snap to install behind the license plate. I will eventually make a backer plate and attach it to the backrest to get the helmets father away from the ground, back wheel and exhaust. (Posted on 5/10/2016)
Review by janbo
Rating
The Helmet Guardian is a great addition to my FJ09. Well constructed and looks good. You do need a special bit (security hex key) to install. Once I figured that out, was good to go. Love it! (Posted on 4/28/2016)
Review by rugs52
Rating
This thing works perfectly just as pictured and described in the web page. The key works and the locks pop!! I can't wait to make my next purchase through twisted throttle; just need to save a little money but the shipping was flawless and timely. (Posted on 4/13/2016)
Review by Nakid
Rating
Bought this item a couple of months ago since my wife decided to start coming in rides with me. It's been great to have the ability to lock both helmets to the bike rather than carrying them around with us. Having both locks keyed the same is one of the best features.
I have it mounted to the back of my plate replicator and it works well. The only "bad" thing I can say is that the security bolts are about twice as long as they need to be. Other than that, awesome! (Posted on 2/16/2016)
Review by HumanBeans
Rating
Most of my friends leave their helmets strapped to their bikes (Some places I ride the helmet would be take in a heart beat, not by other bikers but dumb kids) or they take them with them (which I did). But not with the helmet lock I can lock two helmets and not worry about them being stolen. I wouldn't leave it there overnight, but to eat or run into a store or touring sites it is great! (Posted on 1/10/2016)
Review by jdycus
Rating
When I went into stores I always had to make a choice between leaving my helmet on the bike and worrying that it would be gone when I returned or hauling it into the store.This fits the bike in an unobtrusive way and works perfectly. Great product. (Posted on 11/24/2015)
Review by Doin time
Rating
Well built, nice addition to my new bike. OEM should have thought of this. (Posted on 11/9/2015)
Review by scott_rei
Rating
I have a couple of friends and family members that have used the helmet guardian. And love it. After buying and installing it, I can see why.
It took very little time to install provided better security for my license plate from theft, and secures my helmet and a passenger or bud's helmet quickly without scratching paint or getting in the way.
Simple to use, easy to install, durable, and affordable. Love it. (Posted on 11/5/2015)
Review by rugs52
Rating
This thing works perfectly just as pictured and described in the web page. The key works and the locks pop!! I can't wait to make my next purchase through twisted throttle; just need to save a little money but the shipping was flawless and timely. (Posted on 9/8/2015)
Review by diegosaenz
Rating
And by safe I mean, no one can just walk away with it. They can always jank it off or unscrew it, but its definitely better than nothing and great when you have an extra helmet to leave on the bike. Probably one of the best farkles out there and cheap too! (Posted on 8/24/2015)
Review by Jiri
Rating
Perfect fit, great quality and functionality, looks like an integral part of the bike. (Posted on 8/16/2015)
Review by cliffordmusante
Rating
I had purchased the previous version of the helmet lock from Twisted Throttle, and while it worked pretty well, I found I needed to lubricate the locking mechanism frequently, due to it being exposed to the weather and the dirt from Adventure riding.
For my new 2015 R1200 GSA, I purchased what I thought was the same product, but was pleasantly surprised that this version does not suffer from the need to regularly lubricate the locking mechanism, and it works perfectly.
This device allows me to easily lock up my helmet, and secure it to the bike during short periods away from the bike.
The helmet lock is a little wider than the previous version, and this extra width seems excessive, but as I think about what will happen when two helmets are clipped into the lock, I can see that the width is appropriate if you need to lock up more than one helmet. (Posted on 7/8/2015)
Review by Janka
Rating
Fantastic product ! I recommand. It's a very good product (Posted on 7/7/2015)
Review by redjon
Rating
...which, in my opinion, is a good thing. Used to be that, motorcycles had helmet locks just like this next to the seat. My 2014 Versys has a more sophisticated (and difficult to use) method. Simpler is better, IMO, and this is simple. (Posted on 6/26/2015)
Review by Joe
Rating
Easy install on my my bike. Well made and looks factory. (Posted on 6/26/2015)
Review by Moe
Rating
Second time around,functional product works well, still using my first one no problems after 15 years. (Posted on 6/23/2015)
Review by Superfunkomatic
Rating
Saw one on an instructor's bike and was glad to find you carry them. Installed easily and the high security hardware is a big plus. Looks very durable and should fit almost any license plate bracket. Shipping was very quick. (Posted on 6/11/2015)
Review by James
Rating
The Helmet Guardian was very easy to install and looks nice on the BMW F800 GS. It is easy to use and securely holds my helmet. It is very nice to have two locks available. (Posted on 6/10/2015)
Review by Tigerxc
Rating
Easy to install Works as advertised Great to have on trips when luggage is full. (Posted on 5/30/2015)
Review by Tiny
Rating
I have one of these for many years and it is the best helmet lock and the easiest lock to use. I have tried many others that didn't compare. I purchased two more for another bike and one for a friends bike. Quality is excellent and easy to install. Very pleased with the product. (Posted on 4/27/2015)
Review by ANIL
Rating
Received the item in good condition this is very solid and looks great installation completed in five minutes. (Posted on 3/15/2015)
Review by Sacrider
Rating
Easy to install and what a convenience. Would not leave helmets on it overnight, but it's great to easily and quickly lock the helmets to the bike when stopping for lunch or going for a hike and etc. (Posted on 3/12/2015)
Review by shazam
Rating
I like this so much I just got one for my new bike and one as a Christmas present for a friend. (Posted on 12/16/2014)
Review by bmash
Rating
Great addition and much needed helmet lock for my Vstrom 650. Looks great, blends in with the bike, works as intended, easy to install. I really like the spring releases on the locks that do not require the key to close. (Posted on 11/27/2014)
Review by Ribitner
Rating
Received shipment quickly. Easy to install in just a few minutes and works as described. (Posted on 11/14/2014)
Review by hintonmcse
Rating
I bought this from Twisted Throttle for my new 2014 Suzuki Vstrom 1000. They shipped quickly and arrived in perfect condition. Installed it in about 5 minutes and works perfectly. The rear fender on the Strom is a bit wobbly but not the product's fault. After some rain I needed to lubricate the locks. Good product and would buy again. (Posted on 10/4/2014)
Review by ollie
Rating
This is the best device for securing your helmet when you are out of site of your bike! And it is always with you. (Posted on 9/24/2014)
Review by Bill
Rating
A super easy and secure method to stow a helmet(s). It also allows a helmet to be locked and then hung upright over he locking mechanism protecting the inside of the helmet from rain. Can easily accommodate two helmets. (Posted on 8/27/2014)
Review by lar
Rating
Fit my Super Tenere by a small modification to the rear reflectors
No our helmets are safe and secure (Posted on 8/27/2014)
Review by ChuckD
Rating
I bought the Helmet Guardian last summer because I couldn't lock my helmet onto my '99 Bandit 1200 with my Givi hard cases latched on. The Givi cases covered the helmet lock on my bike, and I was stuck running a cable through my helmet and locking it to my bike every time I rode. I'm so glad I bought the Guardian. The install was simple and took all of 5 minutes. The device is sturdy and fits 2 helmets perfectly. It's also nice that I can unlock it and remove the key so I can then unlock my Givi cases. Great invention! (Posted on 8/26/2014)
Review by MBM
Rating
I bought this item last year and its probably the most useful item I bought for my Versys. Simple and easy to install, a must for anyone riding 2 up. (Posted on 8/13/2014)
Review by Frog
Rating
I often need to leave 2 helmets near our bikes and found this product is great both locked and unlocked for holding 2 modular full face helmets (Posted on 7/7/2014)
Write Your Own Review

Only registered users can write reviews. Please, log in or register

Chat with us!