Cart - $0.00

You have no items in your shopping cart.


Rox Handlebar Risers For 28mm Bars On Select BMW, Kawasaki & KTM Motorcycles with 28mm OE Handlebars | 1.75in rise

Rox Handlebar Risers For 28mm Bars On Select BMW, Kawasaki & KTM Motorcycles with 28mm OE Handlebars | 1.75in rise

$95.00 $85.50

Special order item.

Email me when back in stock


Email Me When Back In Stock

Enter your email below and we'll notify you when it is back in stock.

* Required Fields


Rox Handlebar Risers for 28mm bars on select BMW, Kawasaki & KTM, motorcycles allow you to adjust the position of your handlebars, instead of adjusting your posture to them. Designed specifically for oversized handlebars and fatbars, they feature dual rotation points that allow you to pivot them up and back diagonally approximately 1.75 inches to relieve the pressure that can build up on your wrists, forearms, and neck while riding. Removing this pressure means less pain and longer rides, and longer rides make for a happier you.

In the event that you've installed aftermarket or replacement footpegs and your handlebar position is no longer suitable, these risers will adjust your handlebars and get you riding in comfort again.

Need a larger displacement to get your handlebars in the right position? We offer Rox Handlebar Risers For 28mm Bars On Select BMW, KTM, Triumph & Ducati Motorcycles with a 2in Rise.

Crafted out of CNC machined billet 6061 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability.  These barbacks look great and are available in four finishes—and doesn't your motorcycle deserve that?

Ride with less strain and fatigue by installing these handlebar risers from Rox today.


  • 1.17in of displacement
  • Made for 28mm (1 1/8in) handlebars
  • Pivots forward or backward depending on personal preference
  • CNC machined billet 6061 T6 aluminum
  • Available in black anodized or clear anodized finish

What's In The Box:

  • One set of Rox Handlebar Risers for 28mm (1-1/8in) bars
  • Installation hardware
  • Installation manual
  • Rox sticker

Fits the following bikes:


  • BMW F800GS '08-'12
  • BMW F800GS '13-'17
  • BMW F800GS Adventure '14-'17


  • Kawasaki Versys 1000 '15-'18


  • KTM 250/300/350/450/500 EXC/SX/XC
  • KTM 250 EXC-F '17
  • KTM 350 EXC-F '17
  • KTM 500 EXC-F '17
  • KTM 690 Enduro R '07-'16
  • KTM 990 Adventure '06-'13
  • KTM 1190 Adventure & 1190 Adventure R '13-'16
  • KTM 1290 Super Adventure '15-'16

Note: First determine if you have adequate cable length and if cables can be re-routed before installing handlebar risers. Amount of extra cable length varies based on make and model. It is recommended that you consult your local dealer. After installation, check for any binding or pinching of the control cables (throttle cable, brake hose/cable) etc. When you are sure nothing is binding, start machine in neutral, slowly turn handlebar from left to right, if the engine idle speed increases STOP TURNING HANDLEBARS, TURN OFF ENGINE, YOUR THROTTLE CABLE IS BINDING. Check throttle routing and length. You may have to adjust position of controls, or purchase extended cables.

You may also be interested in the following product(s)

Customer Reviews
Review by Guest
The Rox Risers helped me reach my bars! Nice product. Great Finish, TT handled the order well. (Posted on 7/13/2017)
Write Your Own Review

Only registered users can write reviews. Please, log in or register

Chat with us!