Cart - $0.00

You have no items in your shopping cart.


Rox Handlebar Risers For 28mm Bars On Select BMW, KTM, Triumph & Ducati Motorcycles | 2in rise

Rox Handlebar Risers For 28mm Bars On Select BMW, KTM, Triumph & Ducati Motorcycles | 2in rise

$97.00 $87.30

Out of stock but more on the way. Order now for fastest delivery.

Email me when back in stock


Email Me When Back In Stock

Enter your email below and we'll notify you when it is back in stock.

* Required Fields


Rox Handlebar Risers for 28mm bars on select BMW, KTM, Triumph & Ducati motorcycles allow you to adjust the position of your handlebars, instead of adjusting your posture to them. Designed specifically for oversized handlebars and fatbars, they feature dual rotation points that allow you to pivot them up and back diagonally approximately 2 inches to relieve the pressure that can build up on your wrists, forearms, and neck while riding. Removing this pressure means less pain and longer rides, and longer rides make for a happier you.

In the event that you've installed aftermarket or replacement footpegs and your handlebar position is no longer suitable, these risers will adjust your handlebars and get you riding in comfort again.

Crafted out of CNC machined billet 6060 T6 aluminum, these handlebar risers are engineered and tested for maximum strength and durability.  These barbacks look great and are available in four finishes—and doesn't your motorcycle deserve that?

These Rox risers will mount on essentially any machine that has a handlebar that measures 1 1/8" at the bar clamps, has an open mounting area, and has enough cable slack to accommodate the risers.


  • 2 inches of displacement
  • Made for 28mm (1 1/8 inch) handlebars
  • Pivots forward or backward depending on personal preference
  • CNC machined billet 6060 T6 aluminum
  • Available in black anodized, gunmetal gray anodized, clear anodized or machined aluminum finish

What's In The Box:

  • One set of Rox Handlebar Risers for 28mm (1-1/8in) bars
  • Installation hardware
  • Installation manual
  • Rox sticker

Handlebar risers for 28mm handlebars fit bikes including:

  • BMW F800GS '08-'12 (not compatible with 1R-AV2PP)
  • BMW F800GS '13-'16 (not compatible with 1R-AV2PP)
  • BMW F800GS Adventure '14-'18 (not compatible with 1R-AV2PP)
  • BMW F800GT '13-'17
  • BMW R nineT '14-'18
  • BMW S1000R '14-'18
  • BMW R1200GS '04-'12
  • BMW R1200GS Adventure '06-'13
  • BMW R1200R '06-'14
  • Ducati Hypermotard 821 '13-'15
  • Ducati Hypermotard 1100 '08-'13
  • Ducati Multistrada 1200, 1200S & 1200S GT '10-'14
  • Honda CTX700 '14-'17
  • Honda CTX1300 '14
  • Honda XRV750 & XRV650 Africa Twin '88-'03
  • Honda Africa Twin CRF1000L '16
  • Kawasaki Z1000 '03-'16
  • Kawasaki Versys 1000 '15-'18
  • KTM 250 '04-'16
  • KTM 300XC '04-'16
  • KTM 350EXC/XC/SX '04-'16
  • KTM 450EXC/SX/XC '04-'16
  • KTM 500EXC/XC '04-'16
  • KTM 690 Enduro R '07-'18
  • KTM 950 Adventure '03-'15
  • KTM 990 Adventure '06-'13
  • KTM 1290 Super Adventure & T '15-'17
  • Moto Guzzi Stelvio 1200 4V '09-'11
  • Triumph Speed Triple '08-'15
  • Triumph Street Triple '08-'11
  • Triumph Tiger 800XC & 800XCS '11-'14
  • Triumph Tiger 1200 Explorer '12-'15
  • Yamaha V-Max 1200 '04-'07
  • Yamaha FJ-09 '15-'17
  • Yamaha XT1200Z Super Tenere '11-'13

Note: First determine if you have adequate cable length and if cables can be re-routed before installing handlebar risers. Amount of extra cable length varies based on make and model. It is recommended that you consult your local dealer. After installation, check for any binding or pinching of the control cables (throttle cable, brake hose/cable) etc. When you are sure nothing is binding, start machine in neutral, slowly turn handlebar from left to right, if the engine idle speed increases STOP TURNING HANDLEBARS, TURN OFF ENGINE, YOUR THROTTLE CABLE IS BINDING. Check throttle routing and length. You may have to adjust position of controls, or purchase extended cables.

You may also be interested in the following product(s)

Customer Reviews
Review by Guest
The product is very well made and easy to install. I put these on my BMW and they improved the riding position without materially affecting the riding dynamics and handling of the bike. I did not have to replace the cables and have normal steering ability. (Posted on 8/13/2018)
Review by Guest
Installed on a 2018 V-Strom XT 1000. Has to reroute cables to behind the triple tree, easy to do.

No longer have shoulder blade issues. These are recommended if you have any phantom shoulder pain, which MAY indicate you are reaching for the bars when in the riding position. (Posted on 7/18/2018)
Review by Guest
Easy to install and does even better job than advertised or expected (Posted on 3/6/2018)
Review by Guest
I put these on and they immediately changed my riding position. Not only did I want to be able to stand occasionally but I also wanted to set the bars back just a bit. The Rox accessories allowed me to accomplish both. I am using them on my 2013 Triumph Tiger XC (Posted on 7/29/2017)
Write Your Own Review

Only registered users can write reviews. Please, log in or register

Chat with us!