x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
CBR1000RR SP '17

CBR1000RR SP '17

CBR1000RR SP '17

2017 Honda CBR1000RR SP

Honda CBR1000RR SP '17

Carve more canyons and twist it through more turns with motorcycle protection, comfort, lighting and luggage upgrades for your Honda CBR1000RR SP. With quality accessories by respected brands like R&G, SW-MOTECH, DrySpec, DENALI, GIVI and AdMore Lighting, you will be sure to ride longer, see further and carry more.

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 89 total

Page:
  1. 1
  2. 2
  3. 3
  1. AdMore Lighting High Output Premium LED Light Bar with Running, Brake, Progressive Turn Signals & Smart Brake Technology

    AdMore Lighting High Output Premium LED Light Bar | Running, Brake, Progressive Turn Signals & Smart Brake Technology

    Built-in accelerometer helps reduce the risk of rear-end collisions

    The AdMore Lighting high output premium LED light bar with running, brake, progressive turn signals, and Smart Brake technology is an essential piece of safety equipment on your motorcycle. With the programmable accelerometer, this new light bar is one of the most advanced motorcycle safety accessories on the market. It's also some of the cheapest insurance you can buy.

    *Photo animation illustrates brake and turn signal functions only. During deceleration, the center strip of white LED lights also flashes to alert oncoming drivers.


    AdMore has upped the ante with this Smart Brake technology. Significantly reduce the risk of a rear-end collision with a sophisticated accelerometer that activates brake lights with no input other than rapid deceleration via throttle release or downshifting. Command attention with 81 retina burning LED's that feature progressive amber turn signals. The brake light ignites with a flashing strobe upon initial application to capture the awareness of drivers behind you with a consistent strobe of white LED's that are sure to be seen. The unit also works with the hazard (4-way flasher) lights of your motorcycle by activating both progressive turn signals to increase roadside visibility.

    This LED light bar is pre-configured with the most popular settings and options and is primed to go out of the box. If you like to tinker, and tweak, the AdMore light bar allows you to customize its pre-set status. Simply connect it to any computer using the included Micro-USB cable, and use the AdMore Configurator Software Suite (under "Documentation/Software Download") that will allow you modify the brightness level, deceleration sensitivity, brake light modulation, white strobe light, license plate light and more!

    The AdMore premium light bar is easy to install using the strong universal black powder coated aluminum mounting bracket. All hardware and premium connectors are included in the kit.

    Learn More
    $199.99 $199.00

  2. DENALI DRL Daytime Running Lights with Universal Fender Mounting Kit

    DENALI DRL Daytime Running Lights Kit with Universal Fender Mounting Kit | Amber or White

    This Daytime Running Light Kit is designed to mount a pair of DENALI DRL pods on the front fender of your bike, creating maximum visibility to oncoming traffic. This kit directly replaces the original M5 or M6 fender hardware securing the DRL’s close to the fender for a sleek, low-profile installation.

    Learn More
    $155.00

  3. DENALI DRL Daytime Running Lights with Universal Offset Mounting Kit | Amber or White

    DENALI DRL Daytime Running Lights with Universal Offset Mounting Kit | Amber or White

    This Daytime Running Light Kit is designed for fitting a pair of DENALI DRL pods to the side of any M6 hardware mounting point on your motorcycle for maximum visibility to oncoming traffic. These are ideal for tucking the DRLs up inside the fairing for an integrated factory look. Learn More
    $142.00

  4. DENALI S4 2.0 TriOptic LED Light Pod

    DENALI S4 2.0 TriOptic LED Light Pod

    The S4 is the first light DENALI developed as part of the new S-Series product line. At more than 3000 lumens and economically priced, the S4 provides more light per dollar than just about anything else on the market. The new S-Series was specifically engineered to reduce cost without sacrificing performance, quality or durability. In fact, the S4 features the same high-intensity LEDs as the D-Series lights, but utilizes a single-piece optic and sealed beam construction to reduce the number of components. The result is a durable high-performance light that won't break the bank. Learn More
    $110.00

  5. DrySpec D20 Waterproof Motorcycle Drybag Saddle Bag System in Black, Grey & Orange | 20L each, 40L Total

    DrySpec D20 Waterproof Motorcycle Drybag Saddle Bag System in Black, Grey & Orange | 20L each, 40L Total

    The D20 saddlebag set is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. The D20 also features a rigid core construction that allows the bags to retain their shape even when empty and makes packing and unpacking super easy. Learn More
    $174.99

  6. RAM-B-231ZU RAM motorcycle handlebar base with U-bolt for 0.5" to 1.25" diameter bars

    RAM Mounts B-231ZU Universal Handlebar Base with Zinc Coated U-Bolt for 0.5in to 1.25in Bars

    The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The rust proof metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. The base also includes black cover caps to be placed over the exposed ends of the u-bolt. Learn More
    $16.49 $14.99

  7. R&G Micro LED Indicators Turn Signals

    R&G Micro LED Indicators Turn Signals

    R&G Micro LED Turn Signals (pair). Designed to fit the R&G line of "Tail Tidy" fender eliminators. Learn More

    $37.99

  8. RAM-B-201U-A Single 2-inch Short Double Socket Extension Arm

    RAM Mounts B-201U-A Short Double Socket Arm | 1.75in

    Compatible with all 1" RAM balls. Connects a base to a cradle. Learn More
    $14.49 $12.99

  9. RAM-B-349U RAM BASE W/ M10 X 1.25 PITCH & 1" BALL

    RAM Mounts B-349U Base with M10 x 1.25 Pitch Threaded Post

    Not using the threaded hole for your bike mirror? RAM has the perfect 1" gadget mount. The RAM-B-349U threaded ball base fits many motorcycles including the Victory Vision. Place a RAM rubber ball on your motorcycle to quickly and easily mount a GPS, Cell Phone, MP3, Cup Holder or most any small electronic device. Learn More
    $9.99 $8.99

  10. RAM-HOL-PD3U Universal Spring-Loaded Device Cradle - Rugged

    RAM Mounts HOL-PD3U Quick-Grip Spring Loaded Universal Device Cradle

    Adjustable cradle for mounting larger cellphones or video iPods. This kit may be mounted directly to any RAM-B-238 mounting base, as well as any Techmount, Bags-Connection, SW-MOTECH GPS holder. Cradle Clamping Dimensions: Height Range: 4.75" - 6.25" Width Range: 2.25" - 3.25" Learn More
    $16.99 $16.49

  11. RAM-B-238 Diamond Base Plate with 1"-diameter ball mount.  The RAM-B-238 is required for attachment of all RAM GPS holders (sold separately) to any RAM mount system.

    RAM Mounts B-238U Diamond Plate Cradle Adapter

    Required for all RAM device cradles when used with a RAM arm. Not required for connecting RAM device cradles to SW-MOTECH, Techmount, or Adaptive device mounts. Learn More
    $7.99 $6.99

  12. RAM-B-201 3"-long extension arm.  For use with all RAM components with 1"-diameter ball mounts.  RAM extension arms are used to bridge the gap between a RAM base plate and a RAM device holder, such as a GPS holder.   All RAM components are sold

    RAM Mounts B-201U Double Socket Arm | 3in

    Compatible with all 1" RAM balls. Connects a base to a cradle. Learn More
    $14.99 $13.49

  13. RAM Mounts X-GRIP Spring Loaded Universal Holder W/ 1" BALL

    RAM Mounts HOL-UN7BU Universal X-Grip Cradle for Cell Phones & iPhones

    Sometimes, it's all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to complement your phone and become the most useful accessory on your motorcycle. Learn More
    $29.99 $26.99

  14. Clear Lens

    AdMore Lighting High Output LED Light Bar with Running, Brake and Progressive Amber Turn Signals

    Share your intentions while you share the road with the Admore Lighting LED Light Bar.

    Designed to provide additional running, brake and signal visibility to your motorcycle, the Admore Lighting LED Light Bar is now 60% brighter. Available in clear or smoke lens, the 78, high-intensity, bi-color LEDs provide red running lights, bright red brake lighting and progressive amber turn signals. Built in brake modulation starts the brake signal with three bright flashes to help alert motorists to your intentions.

    Learn More
    $134.99 $129.00

  15. Clear Lens

    AdMore Lighting High Output LED Large Light Bar with Running, Brake and Progressive Amber Turn Signals

    Share your intentions while you share the road with the AdMore Lighting LED Large Light Bar.

    Designed to provide additional running, brake and signal visibility to your motorcycle, the AdMore Lighting LED Mini Light Bar is now 60% brighter. Available in clear or smoke lens, the 96, high-intensity, bi-color LEDs provide red running lights, bright red brake lighting and progressive amber turn signals. Built in brake modulation starts the brake signal with three bright flashes to help alert motorists to your intentions.

    Learn More
    $159.99 $159.00

  16. RAP-B-200-12U RAM VARIABLE SWIVEL ARM

    RAM Mounts B-200-12U Double Socket Arm with Swivel

    The RAP-B-200-12U, double socket twist arm, consists of a double 1" diameter open ball sockets with a 360° rotation point at the center of the arm. The rubber ball and socket at either end, and a central pivot point provides unsurpassed adjustability. The RAM ball sockets maximize ball coverage for optimal fit. Learn More
    $16.49 $14.49

  17. RAM Mounts HOL-UN10BU Universal X-Grip IV Large Phone / Phablet Holder with 1in Ball

    RAM Mounts HOL-UN10BU Universal X-Grip IV Cradle for Large Phones or Phablets

    The X-Grip™ IV has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. Learn More
    $33.99 $29.99

  18. RAM Mounts B-400U Tough-Claw Clamp-On Base for Round, Oval, or Square 0.625in to 1.5in Bars

    RAM Mounts B-400U Tough-Claw Clamp-On Base for Round, Oval, or Square 0.625in to 1.5in Bars

    The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Learn More
    $33.49 $29.99

  19. RAM-B-346U RAM RESERVOIR COVER SIDE BALL

    RAM Mounts B-346U Brake or Clutch Reservoir Cover Base | Offset

    The RAM-B-346U brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball OFFSET. Made of Die Cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. Learn More
    $21.49 $18.99

  20. RAM Self-Leveling Cup Holder with 1" Ball and Sleeve

    RAM Mounts Level Cup Drink Holder with Koozie

    A favorite world wide, the RAM self-leveling drink cup holder will bring a smile to anyone’s face when they get it. Learn More
    $19.99 $18.99

  21. RAM Mounts B-349-1U Base with M10 x 1.5 Pitch Threaded Post

    RAM Mounts B-349-1U Base with M10 x 1.5 Pitch Threaded Post

    Not using the threaded hole for your bike mirror? RAM has the perfect 1" gadget mount. The RAM-B-349-1U threaded ball base fits many motorcycles including BMW R1200GS, F650GS twins and F800GS threaded mirror holes.

    Place a RAM rubber ball on your motorcycle to quickly and easily mount a GPS, Cell Phone, MP3, Cup Holder or most any small electronic device. Ideal for use with Doubletake Mirrors.

    Learn More
    $12.99 $11.49

  22. DrySpec D56 Waterproof Motorcycle DryBag Modular Packing System in Black, Grey & Orange | 56L Total

    DrySpec D56 Waterproof Motorcycle DryBag Modular Packing System in Black, Grey & Orange | 56L Total

    The D56 Modular Packing System consists of two D28 DrySpec dual-opening drybags. The D28 is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. Unlike other dry bags, the D28 features a dual-end roll design that allows access to belongings from either end of the bag without having to disconnect the mounting straps. The D28 is perfect by itself for short trips, but is the ideal add on bag for a D38 or your existing sidecases. Learn More
    $153.98

  23. RAM-B-202 round base with 1"-diameter ball mount.

    RAM Mounts B-202U Round Plate with AMPS Hole Pattern

    Includes RAM-B-202 base with 2.5" diameter platform. Compatible with all 1" RAM receptacles. Requires RAP-300-1U. Learn More
    $8.49 $7.49

  24. RAM Mounts B-202U-152 Rectangular Base Plate with AMPS Hole Pattern | 2in x 1.5in

    RAM Mounts B-202U-152 Rectangular Base Plate with AMPS Hole Pattern | 2in x 1.5in

    The RAM-B-202U-152 contains a 1" diameter rubber ball connected at right angles to a 1.5" x 2" rectangular base. This mount has pre-drilled holes at each corner of the base plate. 

    Learn More
    $18.49 $16.49

  25. RAM-B-252U Plate Base with 11mm Hole and 1'' Ball

    RAM Mounts B-252U Offset M10 Bolt & Mirror Post Base

    Plate is 0.87" wide X 2.25" long with a 11mm hole in one end and a 1" RAM ball at the other. Perfect for all motorcycles with standard M10 handlebar mirror mounts. Can be used with most bikes by BMW, Ducati, Honda, Kawasaki, KTM, Suzuki, Triumph, Yamaha, and others with handlebar-mounted mirrors. Learn More
    $12.99 $11.99

  26. RAM motorcycle base for M8 screw

    RAM Mounts B-367U Base for Handlebar Clamps with M8 Bolts

    Your motorcycle rides on rubber tires for grip and to soften the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, the turn of a single knob grips the adjustment arm to a rubber ball designed to dampen shock and vibration. With RAM products, it's all grip and no slip plus protection for your valuable electronics. Simply place our easy to install ball base onto the motorcycle handlebar top clamp and you're done. After that, a world of mounting possibilities just opened up. Fits 2004-2012 BMW R1200GS rear handlebar clamp screws and Triumph Explorer handlebar clamp screws. Learn More
    $11.49 $9.99

  27. Rowe Electronics PDM60 - Power Distribution Module - with User Programmable Cable

    Rowe Electronics PDM60 - Power Distribution Module with User Programmable Cable

    The future of power management......... is here.

    The old methods of power distribution have gone the way of the floppy disk (remember those?).

    No more checking or replacing fuses, or installing relays for powering high amperage electronics.

    The PDM60 Power Distribution Module has 6 power circuits, making it easy to handle all your gadgets and farkles.The bright LED indicators keep you informed of the status of each circuit.

    Learn More
    $199.99

  28. DENALI PowerHub2 fuse block, master ground block and wiring harness for motorcycles

    DENALI PowerHub2 fuse block, master ground block and wiring harness for motorcycles

    Made in America!

    The PowerHub2 Power Distribution Module, manufactured by DENALI allows you to safely connect up to 6 electronic devices to your motorcycle in a clean, professional manner. It is CAN-Bus compatible and includes six 15-amp rated and fused outputs, six ground posts, and a plug-and-play wiring harness for direct battery hookup. Each of the six outputs can be individually set as "always on" or "switched" on/off with the ignition of the motorcycle. Instead of attaching multiple ring terminals to your battery, use a PowerHub2!

    Learn More
    $129.99

  29. RAM-HOL-GA5 mount for Garmin E-Trex-series GPS.

    RAM Mounts HOL-GA5U Cradle for Garmin e-Trex Legend, Summit, Venture, & Vista

    Includes RAM-HOL-GA5U holder for Garmin e-Trex Legend, Summit, Venture, & Vista. Learn More
    $16.99 $14.99

  30. RAM-HOL-GA7 mount for Garmin GPSMAP 176, 176C, 196, 276C, & 296 GPS.

    RAM Mounts HOL-GA7U Cradle for Garmin GPSMAP 176, 176C, 196, 276C, 296, 376C, 378, 396, 478, & 496

    Includes RAM-HOL-GA7U holder for Garmin GPSMAP 176, 176C, 196, 276C, 296, 376C, 378, 396, 478, & 496 Learn More
    $10.99 $9.99

  31. RAM-HOL-GA9 mount for Garmin Streetpilot 2610, 2620, and 2650 GPS.

    RAM Mounts HOL-GA9U Cradle for Garmin BMW Navigator II, & III, StreetPilot 2610, 2620. 2650, 2660, 2720, 2730, & 2820

    Includes RAM-HOL-GA9U holder for Garmin BMW Navigator II, & III, StreetPilot 2610, 2620. 2650, 2660, 2720, 2730, & 2820 Learn More
    $16.99 $14.99

  32. RAM-B-272 base for M8 (8mm diameter) mounting points

    RAM Mounts B-272U Offset M8 Bolt & Mirror Post Base

    Aluminum small plate base with 9mm-diameter hole and 1'' ball. For use with any M8 (8mm-diameter) or smaller screw mount point. Learn More
    $14.49 $12.99

  33. RAM-B-345U RAM RESERVOIR COVER CENTER BALL

    RAM Mounts B-345U Brake or Clutch Reservoir Cover Base | Centered

    The RAM-B-345U brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball CENTERED. Made of Die Cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. Learn More
    $19.99 $17.99

  34. RAM-B-201U-C extension arm (5.25-inch)

    RAM Mounts B-201U-C Long Double Socket Arm | 5.25in

    Compatible with all 1" RAM balls. Connects a base to a cradle. Learn More
    $20.99 $18.99

  35. RAM-B-237 camera mount without support platform.  Comaptible with all 1"-diameter RAM sockets.

    RAM Mounts B-237U Base with 1/4-20 Threaded Post for Cameras

    Includes RAM-B-237 camera mount (without platform) with 1/4" x 20 male threaded stud. Can also be used as a base if threaded into a 1/4-20 hole. Learn More
    $8.99 $7.99

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 89 total

Page:
  1. 1
  2. 2
  3. 3
Chat with us!