x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
VT1100C2 Shadow Sabre '00-'08

VT1100C2 Shadow Sabre '00-'08

VT1100C2 Shadow Sabre '00-'08

2000-2008 Honda VT1100C2 Shadow Sabre

FILTER OPTIONS

Grid List

per page

15 Item(s)

  1. AdMore Lighting High Output Premium LED Light Bar with Running, Brake, Progressive Turn Signals & Smart Brake Technology

    AdMore Lighting High Output Premium LED Light Bar | Running, Brake, Progressive Turn Signals & Smart Brake Technology

    Built-in accelerometer helps reduce the risk of rear-end collisions

    The AdMore Lighting high output premium LED light bar with running, brake, progressive turn signals, and Smart Brake technology is an essential piece of safety equipment on your motorcycle. With the programmable accelerometer, this new light bar is one of the most advanced motorcycle safety accessories on the market. It's also some of the cheapest insurance you can buy.

    *Photo animation illustrates brake and turn signal functions only. During deceleration, the center strip of white LED lights also flashes to alert oncoming drivers.


    AdMore has upped the ante with this Smart Brake technology. Significantly reduce the risk of a rear-end collision with a sophisticated accelerometer that activates brake lights with no input other than rapid deceleration via throttle release or downshifting. Command attention with 81 retina burning LED's that feature progressive amber turn signals. The brake light ignites with a flashing strobe upon initial application to capture the awareness of drivers behind you with a consistent strobe of white LED's that are sure to be seen. The unit also works with the hazard (4-way flasher) lights of your motorcycle by activating both progressive turn signals to increase roadside visibility.

    This LED light bar is pre-configured with the most popular settings and options and is primed to go out of the box. If you like to tinker, and tweak, the AdMore light bar allows you to customize its pre-set status. Simply connect it to any computer using the included Micro-USB cable, and use the AdMore Configurator Software Suite (under "Documentation/Software Download") that will allow you modify the brightness level, deceleration sensitivity, brake light modulation, white strobe light, license plate light and more!

    The AdMore premium light bar is easy to install using the strong universal black powder coated aluminum mounting bracket. All hardware and premium connectors are included in the kit.

    Learn More
    $199.99 $199.00

  2. DENALI DRL Daytime Running Lights with Universal Fender Mounting Kit

    DENALI DRL Daytime Running Lights Kit with Universal Fender Mounting Kit | Amber or White

    This Daytime Running Light Kit is designed to mount a pair of DENALI DRL pods on the front fender of your bike, creating maximum visibility to oncoming traffic. This kit directly replaces the original M5 or M6 fender hardware securing the DRL’s close to the fender for a sleek, low-profile installation.

    Learn More
    $155.00

  3. DENALI DRL Daytime Running Lights with Universal Offset Mounting Kit | Amber or White

    DENALI DRL Daytime Running Lights with Universal Offset Mounting Kit | Amber or White

    This Daytime Running Light Kit is designed for fitting a pair of DENALI DRL pods to the side of any M6 hardware mounting point on your motorcycle for maximum visibility to oncoming traffic. These are ideal for tucking the DRLs up inside the fairing for an integrated factory look. Learn More
    $142.00

  4. DENALI Fender Bolt Mount Kit For Mounting DM & D2 Auxiliary Lights To M5 & M6 Bolts

    DENALI Fender Bolt Mount Kit For Mounting DM, D2 & S4 Auxiliary Lights To M5 & M6 Bolts

    The DENALI fender mount for smaller Denali lights provides a secure foundation for fitment of the LED light pods on a front fender that is fastened by M5 or M6 bolts. This kit directly replaces the OEM hardware securing the pods close to the fender for low profile appearance that will not disturb the natural aesthetics of your motorcycle. The versatile mounts can accommodate the DENALI DM LED light kit or the D2 LED light kit and are very simple to install. No drilling, cutting or any other modifications are required for fitment. Learn More
    $40.00

  5. Clear Lens

    AdMore Lighting High Output LED Light Bar with Running, Brake and Progressive Amber Turn Signals

    Share your intentions while you share the road with the Admore Lighting LED Light Bar.

    Designed to provide additional running, brake and signal visibility to your motorcycle, the Admore Lighting LED Light Bar is now 60% brighter. Available in clear or smoke lens, the 78, high-intensity, bi-color LEDs provide red running lights, bright red brake lighting and progressive amber turn signals. Built in brake modulation starts the brake signal with three bright flashes to help alert motorists to your intentions.

    Learn More
    $134.99 $129.00

  6. DENALI B6 Auxiliary LED License Plate Brake Light

    DENALI B6 Auxiliary LED License Plate Brake Light

    The B6 LED brake light was purpose built to create the most amount of light from the most compact, low-profile housing possible. Six 1-watt Light Emitting Diodes generate improved visibility with minimal bulk. Newly updated to operate as both a brake light and running light, the B6 provides enhanced functionality on conventional motorcycles as well as those that can use the advanced features of the CANsmart Controller (sold separately). Note that flash patterns and deceleration activated “auto brake light” functionality is only available when used in conjunction with the DENALI CANsmart Controller.

    NOTE: Not compatible with any KTM Super Duke Models

    Learn More
    $95.00

  7. DENALI B6 Flush Mount LED Auxiliary Brake Light

    DENALI B6 Flush Mount LED Auxiliary Brake Light Kit

    Purpose built to create the most amount of light from the smallest, slimmest housing possible, the DENALI B6 is unbelievably bright and extremely compact. Complete with a waterproof micro connector, plug-n-play splitter and included posi-taps, the B6 will plug-n-play directly to the DENALI CANsmart controller or connect into any vehicle brake light circuit.

    Learn More
    $53.00

  8. DENALI B6 Dual License Plate LED Auxiliary Brake Lights

    DENALI B6 Dual License Plate LED Auxiliary Brake Lights Kit

    Purpose built to create the most amount of light from the smallest, slimmest housing possible, the DENALI B6 dual license plate LEDs are unbelievably bright and compact for an integrated fit on your license plate. Complete with a waterproof micro connector, plug-n-play splitter and included posi-taps, the B6 will plug-n-play directly to the DENALI CANsmart controller or connect into any vehicle brake light circuit.

    Learn More
    $142.00

  9. DENALI DRL Daytime Running Light with Waterproof Flush Mounting Kit | Amber or White

    DENALI DRL Daytime Running Light with Waterproof Flush Mounting Kit | Amber or White

    This Daytime Running Light kit allows installation of a single DENALI DRL pod with a flush fitment on any flat surface of your motorcycle for maximum visibility towards oncoming traffic. A silicone gasket ensures the unit is watertight and the included hardware allows through-bolting as well as blind self-tapping for installation on plastic. Learn More
    $53.00

  10. DENALI LED DRL Visibility Pod | White

    DENALI LED DRL Visibility Pod | White

    DENALI's LED DRL Pod was built to create the most amount of light from the smallest, most low-profile, housing possible. DRL Visibility Pods are unbelievably bright but will practically disappear once installed. The white and amber pods are compatible with a variety of mounting kits that enable the lights to be used as DRLs, turn signals and backup lights. Choose between an offset mount, fender mount, or flush mount.

    Complete with an integrated dual intensity circuit, the lights can be wired to run at full intensity, half intensity or automatically switch between the two with your vehicle's original high beam switch or turn signal switch. Like emergency strobe lights, DENALI DRL optics are designed to concentrate the light at the source as opposed to project it down the road. While ideal for daytime and nighttime conspicuity, these lights will also through a noticeable spread of fill lighting at night on the immediate road ahead.

    Using the included wiring adapter, the DRLs can be directly plug-and-play connected to a CANsmart Accessory Controller or to any DENALI 2.0-series wiring harness. When connected to a DENALI 2.0 harness, the DRLs will run only in high-intensity mode. But when connected through the CANsmart, the DRLs can be fully dimmed.

    Learn More
    $45.00

  11. DENALI LED DRL Visibility Pod | Amber

    DENALI LED DRL Visibility Pod | Amber

    DENALI's LED DRL Pod was built to create the most amount of light from the smallest, most low-profile, housing possible. DRL Visibility Pods are unbelievably bright but will practically disappear once installed. The white and amber pods are compatible with a variety of mounting kits that enable the lights to be used as DRLs, turn signals and backup lights. Choose between an offset mount, fender mount, or flush mount.

    Complete with an integrated dual intensity circuit, the lights can be wired to run at full intensity, half intensity or automatically switch between the two with your vehicle's original high beam switch or turn signal switch. Like emergency strobe lights, DENALI DRL optics are designed to concentrate the light at the source as opposed to project it down the road. While ideal for daytime and nighttime conspicuity, these lights will also through a noticeable spread of fill lighting at night on the immediate road ahead.

    Using the included wiring adapter, the DRLs can be directly plug-and-play connected to a CANsmart Accessory Controller or to any DENALI 2.0-series wiring harness. When connected to a DENALI 2.0 harness, the DRLs will run only in high-intensity mode. But when connected through the CANsmart, the DRLs can be fully dimmed.

    Learn More
    $45.00

  12. DENALI Fender Mounting Kit for DRL & B6 Visibility Pods

    DENALI Fender Mounting Kit for DRL & B6 Visibility Pods

    This mounting kit is specifically designed to mount a pair of DENALI DRL or B6 Visibility Pods 90 degrees to any M6 mounting point on your vehicle. The pair of powder coated steel brackets create the ideal mount for installing DRLs down low on your motorcycles front fender or installing DRLs as backup lights on body panels and ATV cargo racks. This mount can also be used to position B6 brake light pods in the ideal location in the rear of your motorcycle.

    Learn More
    $65.00

  13. DENALI Offset Mounting Kit for DRL & B6 Visibility Pods

    DENALI Offset Mounting Kit for DRL & B6 Visibility Pods

    This mounting kit is specifically designed to mount a pair of DENALI DRL or B6 Visibility Pods to the side of any M6 mounting point on your vehicle. The pair of powder coated steel brackets create the ideal mount for tucking DRLs up inside a motorcycle fairing or positioning a pair of B6 brake light pods to the side of a license plate.

    Learn More
    $52.00

  14. DENALI Flush Mounting Kit for DRL & B6 Visibility Pods

    DENALI Flush Mounting Kit for DRL & B6 Visibility Pods

    This mounting kit provides a waterproof gasket and all necessary hardware for installing a DENALI DRL or B6 Visibility Pod to any flat surface. Use this mounting kit to install DRLs to body panels and hand guards or mount B6 brake light pods directly to your rear bumper or on the back of your luggage cases.

    Learn More
    $8.00

  15. DENALI B6 Brake Light Visibility Pod | Red

    DENALI B6 Brake Light Visibility Pod | Red

    DENALI's B6 Brake Light Visibility Pod was built to create the most amount of light from the smallest, most low-profile, housing possible. The B6 Brake Light is unbelievably bright but will practically disappear once installed. Complete with an integrated run-brake circuit, the three-wire B6 pod with run at 50% intensity on the red wire and switch to 100% full intensity through the orange wire.

    The B6 brake light pods are compatible with a variety of mounting kits that enable the pods to be mounted below a license plate, on the side of a license plate or flush mounted onto any flat surface. Choose between an offset mount, fender mount, or flush mount.

    Complete with a waterproof micro connector and included posi-taps, the B6 is super easy to connect into any vehicles brake light circuit. The B6 also connects directly to the DENALI CANsmartâ„¢ Controller to enable programmable flash pattern braking and deceleration activated auto brake light functionality making the B6 the brightest and most feature-rich auxiliary brake light on the market.

    Learn More
    $45.00

FILTER OPTIONS

Grid List

per page

15 Item(s)

Chat with us!