x
CART
Cart - $0.00

You have no items in your shopping cart.

USD
Electronics & Wiring

Electronics & Wiring

Electronics & Wiring

Electronics & Wiring

If you're looking to add electronic devices to enhance the safety and comfort of your motorcycle, you're in the right place.  Browse from a selection of wiring, fuse blocks, device mounts and cradles made for your motorcycle that will get the job done. Shop with us to stay powered up and connected with wiring and electrical components made for motorcyclists and their motorcycles.

 

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 81 total

Page:
  1. 1
  2. 2
  3. 3
  1. Denali SoundBomb Compact Dual-Tone Motorcycle Air Horn

    DENALI SoundBomb Compact Dual-Tone Motorcycle Air Horn

    LOUD! Stylish! Rugged!

    Producing an earsplitting 120 decibels of sound, the SoundBomb is 4 times louder than a standard motorcycle horn! The Denali™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the SoundBomb will practically disappear once installed.

    Learn More
    $49.99

  2. DENALI SoundBomb Split Dual-Tone Air Horn

    DENALI SoundBomb Split Dual-Tone Air Horn

    The DENALI SoundBomb split dual-tone air horn produces an earsplitting 120 decibels of sound (four times louder than your typical motorcycle horn!) in a compact two piece design for motorcycles that have a limited amount of space. Ear splitting performance demands attention to make your presence known and keep you safe from traffic that might have failed to notice. A 3 foot length of air line is included to allow the powerful horn to be mounted separately from the compressor for the most efficient use of space. The lightweight components can be securely mounted with cable ties. For maximum safety the compact compressor instantly supplies air to the trumpet by pressing the factory horn button. An upgraded Plug-N-Play Wiring Kit is highly recommended and simple to connect. Significantly improve your safety and visibility with the SoundBomb split dual tone air horn from DENALI!

    Learn More
    $59.99

  3. RAM-B-231ZU RAM motorcycle handlebar base with U-bolt for 0.5" to 1.25" diameter bars

    RAM Mounts B-231ZU Universal Handlebar Base with Zinc Coated U-Bolt for 0.5in to 1.25in Bars

    The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The rust proof metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. The base also includes black cover caps to be placed over the exposed ends of the u-bolt. Learn More
    $16.49 $13.19

  4. RAM-B-201U-A Single 2-inch Short Double Socket Extension Arm

    RAM Mounts B-201U-A Short Double Socket Arm | 1.75in

    Compatible with all 1" RAM balls. Connects a base to a cradle. Learn More
    $14.49 $11.59

  5. RAM-B-349U RAM BASE W/ M10 X 1.25 PITCH & 1" BALL

    RAM Mounts B-349U Base with M10 x 1.25 Pitch Threaded Post

    Not using the threaded hole for your bike mirror? RAM has the perfect 1" gadget mount. The RAM-B-349U threaded ball base fits many motorcycles including the Victory Vision. Place a RAM rubber ball on your motorcycle to quickly and easily mount a GPS, Cell Phone, MP3, Cup Holder or most any small electronic device. Learn More
    $9.99 $7.99

  6. RAM-HOL-PD3U Universal Spring-Loaded Device Cradle - Rugged

    RAM Mounts HOL-PD3U Quick-Grip Spring Loaded Universal Device Cradle

    Adjustable cradle for mounting larger cellphones or video iPods. This kit may be mounted directly to any RAM-B-238 mounting base, as well as any Techmount, Bags-Connection, SW-MOTECH GPS holder. Cradle Clamping Dimensions: Height Range: 4.75" - 6.25" Width Range: 2.25" - 3.25" Learn More
    $16.99 $13.59

  7. RAM-B-238 Diamond Base Plate with 1"-diameter ball mount.  The RAM-B-238 is required for attachment of all RAM GPS holders (sold separately) to any RAM mount system.

    RAM Mounts B-238U Diamond Plate Cradle Adapter

    Required for all RAM device cradles when used with a RAM arm. Not required for connecting RAM device cradles to SW-MOTECH, Techmount, or Adaptive device mounts. Learn More
    $7.99 $6.39

  8. RAM-B-201 3"-long extension arm.  For use with all RAM components with 1"-diameter ball mounts.  RAM extension arms are used to bridge the gap between a RAM base plate and a RAM device holder, such as a GPS holder.   All RAM components are sold

    RAM Mounts B-201U Double Socket Arm | 3in

    Compatible with all 1" RAM balls. Connects a base to a cradle. Learn More
    $14.99 $11.99

  9. RAM Mounts X-GRIP Spring Loaded Universal Holder W/ 1" BALL

    RAM Mounts HOL-UN7BU Universal X-Grip Cradle for Cell Phones & iPhones

    Sometimes, it's all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to complement your phone and become the most useful accessory on your motorcycle. Learn More
    $29.99 $23.99

  10. RAM® Tough-Charge™ with X-Grip® Tech Waterproof Wireless Charging Holder

    RAM® Tough-Charge™ with X-Grip® Tech Waterproof Wireless Charging Holder

    The RAM® Tough-Charge™ with X-Grip® Technology is the world's first patented, universal waterproof wireless charging cradle for phones. Designed with spring-loaded RAM® X-Grip® Technology, this cradle features an 'X' design that expands and contracts to secure nearly any phone while taking advantage of Qi wireless phone charging. All four arms feature rubber-coated caps that hold your phone firmly in place, and the open design keeps buttons and switches accessible on the sides of phones. To insert your device, simply squeeze the arms on one side of the cradle and place your phone inside before releasing the arms. This Qi wireless charging cradle ensures your compatible phone charges no matter what position it’s placed at. For added security and peace of mind, a device tether is included that’s recommended for outdoor applications. In addition, a support leg can be adjusted to the ideal position or removed altogether. This RAM® Tough-Charge™ with X-Grip® Technology wireless charging kit for vehicles includes a B size diamond base featuring a 1” rubber ball – perfect for attaching to your choice of B size RAM® double socket arm. The connected Type-A male pigtail connector features an in-line switch that allows you to turn off the wireless charging module when not in use. For in-vehicle charging, attach the pigtail to the included 1.2m Type-A male to Type-A female extension cable. Learn More
    $131.49 $116.99

  11. RAM Mounts X-GRIP Spring Loaded Universal Holder W/ 1" BALL

    RAM® Quick-Grip™ Waterproof Wireless Charging Holder

    The RAM® Quick-Grip™ Wireless is a patented, universal water resistant wireless charging cradle for phones. As part of the spring-loaded RAM® Quick-Grip™ family, this cradle allows for single-handed placement and removal of your phone while taking advantage of Qi wireless phone charging. Both the top and bottom cups feature rubber to help hold your phone firmly in place. To insert your device, use your phone to push the top cup upward and then gently place your device against the cradle for a secure fit. This Qi wireless charging cradle ensures your compatible phone charges as long as it’s within the listed compatible dimensions. For added security and peace of mind, a device tether is included that’s recommended for outdoor applications. This RAM® Quick-Grip™ Wireless kit for vehicles includes a B size diamond base featuring a 1” rubber ball – perfect for attaching to your choice of B size RAM® double socket arm. The connected Type-A male pigtail connector features an in-line switch that allows you to turn off the wireless charging module when not in use. For in-vehicle charging, attach the pigtail to the included 1.2m Type-A male to Type-A female extension cable. Learn More
    $117.99 $104.99

  12. RAP-B-200-12U RAM VARIABLE SWIVEL ARM

    RAM Mounts B-200-12U Double Socket Arm with Swivel

    The RAP-B-200-12U, double socket twist arm, consists of a double 1" diameter open ball sockets with a 360° rotation point at the center of the arm. The rubber ball and socket at either end, and a central pivot point provides unsurpassed adjustability. The RAM ball sockets maximize ball coverage for optimal fit. Learn More
    $16.49 $13.19

  13. RAM Mounts HOL-UN10BU Universal X-Grip IV Large Phone / Phablet Holder with 1in Ball

    RAM Mounts HOL-UN10BU Universal X-Grip IV Cradle for Large Phones or Phablets

    The X-Grip™ IV has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. Learn More
    $33.99 $27.19

  14. RAM Mounts B-400U Tough-Claw Clamp-On Base for Round, Oval, or Square 0.625in to 1.5in Bars

    RAM Mounts B-400U Tough-Claw Clamp-On Base for Round, Oval, or Square 0.625in to 1.5in Bars

    The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Learn More
    $33.49 $26.79

  15. RAM-B-346U RAM RESERVOIR COVER SIDE BALL

    RAM Mounts B-346U Brake or Clutch Reservoir Cover Base | Offset

    The RAM-B-346U brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball OFFSET. Made of Die Cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. Learn More
    $21.49 $17.19

  16. RAM Self-Leveling Cup Holder with 1" Ball and Sleeve

    RAM Mounts Level Cup Drink Holder with Koozie

    A favorite world wide, the RAM self-leveling drink cup holder will bring a smile to anyone’s face when they get it. Learn More
    $19.99 $15.99

  17. RAM Mounts B-349-1U Base with M10 x 1.5 Pitch Threaded Post

    RAM Mounts B-349-1U Base with M10 x 1.5 Pitch Threaded Post

    Not using the threaded hole for your bike mirror? RAM has the perfect 1" gadget mount. The RAM-B-349-1U threaded ball base fits many motorcycles including BMW R1200GS, F650GS twins and F800GS threaded mirror holes.

    Place a RAM rubber ball on your motorcycle to quickly and easily mount a GPS, Cell Phone, MP3, Cup Holder or most any small electronic device. Ideal for use with Doubletake Mirrors.

    Learn More
    $12.99 $10.39

  18. RAM-B-202 round base with 1"-diameter ball mount.

    RAM Mounts B-202U Round Plate with AMPS Hole Pattern

    Includes RAM-B-202 base with 2.5" diameter platform. Compatible with all 1" RAM receptacles. Requires RAP-300-1U. Learn More
    $8.49 $6.79

  19. RAM-B-252U Plate Base with 11mm Hole and 1'' Ball

    RAM Mounts B-252U Offset M10 Bolt & Mirror Post Base

    Plate is 0.87" wide X 2.25" long with a 11mm hole in one end and a 1" RAM ball at the other. Perfect for all motorcycles with standard M10 handlebar mirror mounts. Can be used with most bikes by BMW, Ducati, Honda, Kawasaki, KTM, Suzuki, Triumph, Yamaha, and others with handlebar-mounted mirrors. Learn More
    $12.99 $10.39

  20. RAM motorcycle base for M8 screw

    RAM Mounts B-367U Base for Handlebar Clamps with M8 Bolts

    Your motorcycle rides on rubber tires for grip and to soften the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, the turn of a single knob grips the adjustment arm to a rubber ball designed to dampen shock and vibration. With RAM products, it's all grip and no slip plus protection for your valuable electronics. Simply place our easy to install ball base onto the motorcycle handlebar top clamp and you're done. After that, a world of mounting possibilities just opened up. Fits 2004-2012 BMW R1200GS rear handlebar clamp screws and Triumph Explorer handlebar clamp screws. Learn More
    $11.49 $9.19

  21. RAM Mounts B-202U-GOP1 Custom GoPro Hero Adapter

    RAM Mounts B-202U-GOP1 Custom GoPro Hero Adapter

    The RAP-B-202U-GOP1 consists of a 1" diameter rubber ball, connected to a custom GoPro® adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket. Learn More
    $10.99 $8.79

  22. RAM Mounts B-379U-M81208 Tough-Ball Base with M8 x 1.25 Pitch Male Threaded Post

    RAM Mounts B-379U-M81208 Tough-Ball Base with M8 x 1.25 Pitch Male Threaded Post

    The RAP-B-379U-M81208 is an M8 x 1.25mm male threaded base post connected to a 1" diameter rubber ball. 

    Many mount points available including any M8 x 1.25 threaded mirror hole.

    Learn More
    $9.99 $7.99

  23. RAM Mounts B-202U-152 Rectangular Base Plate with AMPS Hole Pattern | 2in x 1.5in

    RAM Mounts B-202U-152 Rectangular Base Plate with AMPS Hole Pattern | 2in x 1.5in

    The RAM-B-202U-152 contains a 1" diameter rubber ball connected at right angles to a 1.5" x 2" rectangular base. This mount has pre-drilled holes at each corner of the base plate. 

    Learn More
    $18.49 $14.79

  24. SW-MOTECH Vibration-Damped Quick Release GPS Mounting Base for Honda CB900F '02-'05, CB1300 '03-'09, KTM 1290 Super Adventure / T '15-'17, Triumph Speed Triple 1050 '04-'07, Tiger 1050 '06-'12, Yamaha Xj6 '08-'13 & FZ8 '10-'14

    SW-MOTECH Vibration-Damped Quick Release GPS Mounting Base for Honda CB900F '02-'05, CB1300 '03-'09, KTM 1290 Super Adventure / T '15-'17, Triumph Speed Triple 1050 '04-'07, Tiger 1050 '06-'12, Yamaha Xj6 '08-'13 & FZ8 '10-'14

    This bike-specific electronics mount is outfitted with quick-disconnect and vibration damped mechanisms. This device mount will hold any RAM-B-238-compatible RAM Mount, Garmin Zumo GPS, TomTom Rider GPS, or a Bags-Connection GPS or PDA pocket. Learn More
    $69.95 $59.46

  25. SW-MOTECH Vibration-Damped Quick Release GPS Mounting Base for BMW R1200R '07-'10, Honda NC700X '12-'15, NC700S '12-'14, NT700V Deauville '05-'09, NC750X/S '14, Suzuki GSR600 '05-'10, GSF650 Bandit '05-'13 & GSX650F '07-'13

    SW-MOTECH Vibration-Damped Quick Release GPS Mounting Base for BMW R1200R '07-'10, Honda NC700X '12-'15, NC700S '12-'14, NT700V Deauville '05-'09, NC750X/S '14, Suzuki GSR600 '05-'10, GSF650 Bandit '05-'13 & GSX650F '07-'13

    This bike-specific electronics mount is outfitted with quick-disconnect and vibration damped mechanisms.This device mount will hold any RAM-B-238-compatible RAM Mount, Garmin Zumo GPS, TomTom Rider GPS, or a Bags-Connection GPS or PDA pocket. Learn More
    $69.95 $59.46

  26. SW-MOTECH Vibration-Damped Quick Release GPS Holder for 10mm - 12.5mm diameter handlebar crossbars

    SW-MOTECH Vibration-Damped Quick Release GPS Holder for 10mm - 12.5mm diameter handlebar crossbars

    This electronics mount is outfitted with quick-disconnect and vibration damped mechanisms. Fits all 10 to 12.5mm (0.4 to 0.5 inch) diameter crossbars. Compatible with most handlebar crossbars, including the SW-MOTECH universal handlebar crossbar LST.00.244.100. Learn More
    $69.95 $59.46

  27. SW-MOTECH Vibration-Damped Quick Release GPS Holder Ducati Multistrada 1200/S '10-'14

    SW-MOTECH Vibration-Damped Quick Release GPS Holder Ducati Multistrada 1200/S '10-'14

    This bike-specific electronics mount is outfitted with quick-disconnect and vibration damped mechanisms. Fits the Ducati Multistrada 1200/S '10-'15 and will hold any RAM-B-238-compatible RAM Mount, Garmin Zumo GPS, TomTom Rider GPS, or a Bags-Connection GPS or PDA pocket. Learn More
    $69.95 $59.46

  28. SW-MOTECH Vibration-Damped GPS Holder for 16mm - 16.5mm diameter handlebar crossbars

    SW-MOTECH Vibration-Damped GPS Holder for 16mm - 16.5mm diameter handlebar crossbars

    This electronics mount is outfitted with vibration damped mechanisms. Fits all 16 to 16.5mm (0.65 inch) diameter crossbars. Compatible with the original crossbar on the BMW R1200GS Adventure handlebar. Learn More
    $69.95 $59.46

  29. RAM-B-237 camera mount without support platform.  Comaptible with all 1"-diameter RAM sockets.

    RAM Mounts B-237U Base with 1/4-20 Threaded Post for Cameras

    Includes RAM-B-237 camera mount (without platform) with 1/4" x 20 male threaded stud. Can also be used as a base if threaded into a 1/4-20 hole. Learn More
    $8.99 $7.19

  30. RAM-B-309-7U stainless steel Clutch, Brake, U-bolt combo with ball (for 1-1/8", 1", 7/8", 3/4", & 0.5" diameter bars)

    RAM Mounts B-309-7U Combination Base for 0.5in to 1.25in Handlebars or Brake & Clutch Control Clamps

    Includes U-bolt and all mounting hardware to add a single RAM ball to a 1-1/8", 1", 7/8", or 3/4" diameter bar, as well as being able to connect to your handlebar's left-side clutch clamp or right-side brake clamp. Learn More
    $21.99 $17.59

  31. RAM-B-272 base for M8 (8mm diameter) mounting points

    RAM Mounts B-272U Offset M8 Bolt & Mirror Post Base

    Aluminum small plate base with 9mm-diameter hole and 1'' ball. For use with any M8 (8mm-diameter) or smaller screw mount point. Learn More
    $14.49 $11.59

  32. RAM-mount Assembly for Can-Am Spyder Roadster

    RAM Mounts Control Mount Kit for Can-Am Spyder Roadster

    Bike-specific RAM mount assembly for the Can-Am Spyder Roadster. Compatible with all RAM mount components. Learn More
    $14.99

  33. RAM-B-342U CYCLE STEM BASE W/ 1" DIA BALL

    RAM Mounts B-342U Fork Stem Mount Base for 12-33mm Fork Stems

    The RAM fork stem mount is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit. This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or .5” – 1.10” at the following intervals: Learn More
    $18.49 $14.79

  34. RAM Mounts B-360U Twist and Tilt Pivot Base for Mirror Mounts & M10 x 1.25 or M8 x 1.25 Threaded Holes

    RAM Mounts B-360U Twist and Tilt Pivot Base for Mirror Mounts & M10 x 1.25 or M8 x 1.25 Threaded Holes

    RAM offers a wide variety of motorcycle mounts. A great new addition to this already extensive product line is our new Twist and Tilt base. Made of die cast marine grade aluminum, durability won't be a concern. The patented rubber ball dampens shock and vibration helping to maintain the performance of the mounted device. Simple to use and install, this great little product is compatible with numerous 1" ball mount systems. Designed to be compact and discrete, the Twist and Tilt won't take up a lot of space but will provide a world of mounting possibilities.

    Learn More
    $23.99 $19.19

  35. RAM-B-345U RAM RESERVOIR COVER CENTER BALL

    RAM Mounts B-345U Brake or Clutch Reservoir Cover Base | Centered

    The RAM-B-345U brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball CENTERED. Made of Die Cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. Learn More
    $19.99 $15.99

FILTER OPTIONS

Grid List

per page

Items 1 to 35 of 81 total

Page:
  1. 1
  2. 2
  3. 3
Chat with us!