Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
Protect your hands and levers during your next race with Barkbusters VPS Motocross handguards. Open ended for competition motocross motorcycles with high impact VPS guards and heat treated aluminum mounting frames these MX guards will protect your hands and levers from roosted rocks and debris. Ride harder with Barkbusters VPS Motocross handguards.
Note: The Givi E68 Backrest for E36 or E45 luggage cases has been discontinued and is no longer able to be ordered.High-density black rubber backrest for the Givi E45 & E36 luggage case. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue. Mounts using included studs and nuts. Requires minor drilling of the topcase using the supplied pa...
Strong functional and well-tested Monorack-style toprack for either general luggage or a GIVI Monokey topcase (E460 E52 etc). The light design allows the perfect adjustment of the plate to the motorcycle using unique adjustable fasteners. Includes fitting kit and all hardware needed for mounting.
Securely mount your choice of convenient weather-resistant GIVI Monokey top cases to your 2006-2018 Yamaha FJR1300 sport-tourer. Designed to replace the stock top luggage and passenger grab rails the SR357 kit includes a steel-tube structure to carry an M5 adapter plate (included). This top plate is compatible with any Monokey-series top case which will allow you to carry a weekend's worth of ge
...
This stylish well-constructed replacement windscreen features increased height and improved shape with top-notch quality. Mounts in minutes using stock fasteners. Features clear tint and precision-cut shape.
R&G Front Axle Sliders / Protectors for Honda VFR1200F '10-'14. These fork protectors were designed to help eliminate damage to the front axle during a drop a skidding stop or a "Low Side".
This wiring harness converts the single-intensity Denali D2S LED light to function as a Denali D2D dual-intensity light. The package comes with everything you need to wire two Denali D2 or DX LED pods including relay and lighted on/off switch for handlebar mounting.
High-density black rubber backrest for the Givi B33 cases. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue.
This stylish well-constructed windscreen features improved height and shape with top-notch quality. Mounts in minutes on most unfaired (a.k.a. "naked") motorcycles using a 2-point handlebar mount and front fork mount (up to a 50mm fork tube diameter). Mount included. Shape fits a 7" diameter light bulb (8" diameter can) headlight. Features light smoke tint and precision-cut shape. <...
This stylish well-constructed replacement windscreen features improved height and shape with top-notch quality. Mounts in minutes using stock fasteners. Features clear tint and precision-cut shape. Overall height is 15.5"; maximum width is 17.3". Screen is approximately 6.1 inches (15.5 cm) taller than the original screen.
PLX sideracks hug the tailsection of your bike tighter than any previous mounting system from Givi and are compatible only with Givi PLX sidecases like the Givi V35.
This stylish well-constructed replacement windscreen features improved height and shape with top-notch quality. Mounts in minutes using stock fasteners. Features clear tint.
GIVI BF01 Tanklock tank ring motorcycle specific mounting ring allows the GIVI Tanklock tankbags to hover over your tank to protect the finish. To be used on Suzuki motorcycle models.
This SR-series model-specific M5 adapter plate is designed to add a Givi Monokey case to your existing OEM tail section. The adapter plate is durable molded nylon. Rugged black finish. All necessary mounting hardware and installation diagram included.
Constructed of heavy-duty machined steel aluminum and high-density nylon R&G frame sliders provide maximum protection and high quality fit and finish. R&G "Aero" sliders have an aerodynamic teardrop shape for a more streamlined look than traditional cylindrical slider pucks.
This E-series model-specific adapter plate is designed to add a Givi Monokey case to your existing OEM toprack or tailsection (model-dependent). Depending on the model the adapter plate may be cast aluminum or durable molded nylon. Rugged black finish. All necessary mounting hardware and installation diagram included.
This stylish well-constructed replacement windscreen features improved height and shape with top-notch quality. Mounts in minutes using stock fasteners. Features clear tint and precision-cut shape. Overall height is 29.5" (750mm); maximum width is 23.6" (600mm) approximately 4 inches (10cm) taller than the original screen.
Stylish well-constructed replacement windscreen for the Versys ('07-'09) features improved height and shape with top-notch quality. Mounts in minutes using stock fasteners. Features clear tint and precision-cut shape.
The Quick-Lock EVO carrier is next generation of luggage carrier by SW-MOTECH. Same great Quick-Lock design with a more robust tubular steel rack that has an even more narrow profile than the original sidecarrier! The racks can be removed from the bike in less than 30 seconds without special tools by opening 3-4 quick-release fasteners on each side. These black powder-coated tubular steel racks are compatible with lug…
This stylish well-constructed replacement windscreen features improved height and shape with top-notch quality. Mounts in minutes using stock fasteners. Features clear tint and precision-cut shape. Overall height is 29.5" (750mm); maximum width is 23.6" (600mm) approximately 4 inches (10cm) taller than the original screen. Specific sliding wind-screen transparent complete with fitting kit. Maximum height 90 cm (1...
This E-series model-specific adapter plate is designed to add a Givi Monokey case to your existing OEM toprack or tailsection (model-dependent). Depending on the model the adapter plate may be cast aluminum or durable molded nylon. Rugged black finish. All necessary mounting hardware and installation diagram included.
The GIVI PL532 Tubular Sidecase Racks Suzuki DL650 V-Strom was designed to provide a more unobtrusive mounting solution for the GIVI Monokey side cases. These side racks are custom designed for select individual motorcycle models. The sleek design and integrated look help to maintain the narrowest possible profile for your motorcycle with the side cases mounted while keeping a simple and clean look after the side case...
High-density black rubber backrest for the Givi Trekker cases. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue.
Tidy up the rear of your bike with the fender eliminator "Tail Tidy" with an integrated license plate holder! This "Tail Tidy" fits the Hyosung GT125R '09- GT250R '09- GT650 09-
This E-series model-specific adapter plate is designed to add a Givi Monokey case to your existing OEM toprack or tailsection (model-dependent). Depending on the model the adapter plate may be cast aluminum or durable molded nylon. Rugged black finish. All necessary mounting hardware and installation diagram included.
Stylish well-constructed replacement windscreen for the DL1000 features improved height and shape with top-notch quality. Mounts in minutes using stock fasteners. Features clear tint and precision-cut shape.
If you're fabricating your own Givi Monokey siderack and need the specialized Givi Monokey mounting hardware pieces this is what you need. Includes 1 pyramid clamp 2 mushroom spacers rubber bumpers and standard attachment hardware.
PLX sideracks hug the tailsection of your bike tighter than any previous mounting system from Givi and are compatible only with Givi PLX sidecases like the Givi V35.
LED brakelight kit for the new Givi E55 Maxia 3 topcase. Significantly increase safety and visibility by raising and increasing your bike's brakelight capability. Includes hands-free connector kit which works with all newer (post -'00) Givi-manufactured topracks (Wingrack Monorack and E250 mounting plates).
The GIVI BF05 Tanklock motorcycle specific mounting ring allows the Givi Easy Lock tankbags to hover over your tank to protect the finish. To be used on Cagiva MV and Yamaha motorcycles.
Constructed of heavy-duty machined steel aluminum and high-density nylon R&G frame sliders provide maximum protection and high quality fit and finish. R&G "Aero" sliders have an aerodynamic teardrop shape for a more streamlined look than traditional cylindrical slider pucks.
Are they swingarm spools or axle sliders? Well they are both really!! The spool is mounted to a special black-anodized aluminum bracket (included with the kit). The product will give protection to the rear axle and swingarm area in a crash. When not protecting your investment the "cotton reel" can be used to lift the motorcycle using a rear stand with hooks. For rear wheel removal you can take the Cotton Reels out o...
Stylish well-constructed replacement windscreen for the DL1000 V-Strom and DL650 V-Strom features improved height and shape with top-notch quality. Mounts in minutes using stock fasteners. Features clear tint and precision-cut shape.
Buy 1 set for each Givi Monokey case you will be attaching to your bike. Includes: – 1 pyramid clamp – 2 attachment screws – 2 washers – 4 replacement rubber bumpers
PLX sideracks hug the tailsection of your bike tighter than any previous mounting system from Givi and are compatible only with Givi PLX sidecases like the Givi V35.
Strong functional and well-tested SR-series toprack for either general luggage or a Givi Monolock compatible topcase (E450 E470 etc). The light design allows the perfect adjustment of the plate to the motorcycle using unique adjustable fasteners. Includes fitting kit and all hardware needed for mounting.
Provide added protection and style to your motorcycle with GIVI TN421 Crash Bars Engine Guards for the Kawasaki KLR650. With clean lines and a great looking powder coated black finish as well as solid mounts and 25mm diameter steel tube construction designed to protect your tank in the event of a tip-over this could be the best-looking insurance you could get for your machine. Bolt on the peace of mind and rugged des…
This SR-series model-specific M5 adapter plate is designed to add a Givi Monokey case to your existing OEM tailsection. The adapter plate is durable molded nylon. Rugged black finish. All necessary mounting hardware and installation diagram included.
R&G engine case slider for Suzuki GSXR600 '06-'10 GSXR750 '06-'10. This engine protector was designed to fit the right hand side (RHS) case cover. Left hand case slider also available here: RG.ECS0026BK Crafted from High Density Nylon for strength durability and good looks. They compliment the R&G crash protectors perfectly. The covers simply bolt on over the original engine casing. Slimline for maximum gr...
This stylish well-constructed replacement windscreen features improved height and shape with top-notch quality. Mounts in minutes using stock fasteners. Features clear tint and precision-cut shape. Overall height is 21.3" maximum width is 23.6" approximately 4 inches (10cm) taller than the original screen. Specific sliding wind-screen transparent complete with fitting kit.
This stylish well-constructed windscreen features improved height and shape with top-notch quality. Mounts in minutes using including fitment kit. Features a clear screen and precision-cut shape. Overall height is approximately 5 " taller than the original.
Constructed of heavy-duty machined steel aluminum and high-density nylon R&G frame sliders provide maximum protection and high quality fit and finish. R&G "Aero" sliders have an aerodynamic teardrop shape for a more streamlined look than traditional cylindrical slider pucks.
R&G Front Axle Sliders / Protectors for MV Agusta F4 '06-'11 Brutale 750 & Brutale 910. These fork protectors were designed to help eliminate damage to the front axle during a drop a skidding stop or a "Low Side".
This E-series model-specific adapter plate is designed to add a Givi Monokey case to your existing OEM toprack or tailsection (model-dependent). Depending on the model the adapter plate may be cast aluminum or durable molded nylon. Rugged black finish. Installation diagram included.
This hardware kit allows the use of the Givi PL351 sideracks on the 2004-2006 Yamaha FZ6 without a Givi FZ351 toprack installed and the PLX360 and PL360 sideracks on the 2007 and later Yamaha FZ6 S2.
Our custom-fit brackets for the KLR650E provide the perfect mounting location for auxiliary driving lights. Suitable for smaller lights like the DENALI D2 2.0 and DM 2.0.
GIVI BF04 Tanklock motorcycle specific mounting ring allows the GIVI Tanklock tank bags to hover over your tank to protect the finish. To be used on Kawasaki motorcycles.
R&G Engine Case Covers are AMA Pro Racing approved. This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the left hand side (LHS) crank case cover. Crafted from 4mm polypropylene for maximum groun...
Constructed of heavy-duty machined steel aluminum and high-density nylon R&G frame sliders provide maximum protection and high quality fit and finish. R&G "Aero" sliders have an aerodynamic teardrop shape for a more streamlined look than traditional cylindrical slider pucks.
The GIVI PL257 Tubular Sidecase Racks are designed to provide a more unobtrusive mounting solution for the GIVI Monokey side cases. These side racks are custom designed for select individual motorcycle models. The sleek design and integrated look help to maintain the narrowest possible profile for your motorcycle with the side cases mounted while keeping a simple and clean look after the side cases are removed. Althou...
This stylish well-constructed replacement windscreen features improved height and shape with top-notch quality. Mounts in minutes using stock fasteners. Features clear tint and precision-cut shape. Overall height is 31"; maximum width is 29".
This SR-series model-specific M5 adapter plate is designed to add a GIVI Monokey case to your existing OEM tailsection. The adapter plate is durable molded nylon. Rugged black finish. All necessary mounting hardware and installation diagram included.
This E-series model-specific adapter plate is designed to add a Givi Monokey case to your existing OEM toprack or tailsection (model-dependent). Depending on the model the adapter plate may be cast aluminum or durable molded nylon. Rugged black finish. All necessary mounting hardware and installation diagram included.
These GIVI PL447 Tubular Side Case Racks are designed to provide a more unobtrusive mounting solution for the GIVI Monokey side cases. These side racks are custom designed for select individual motorcycle models. The sleek design and integrated look help to maintain the narrowest possible profile for your motorcycle with the side cases mounted while keeping a simple and clean look after the side cases are removed. Alt...
This Carbon DuPont™ Kevlar® engine protector was designed to fit the left hand side (LHS) case cover. Left hand case slider also available here: RG.ECS0035BK Crafted from High Density Nylon for strength durability and good looks. They compliment the R&G crash protectors perfectly. The covers simply bolt on over the original engine casing. Slimline for maximum ground clearance ultra lightweight matte finis...
These model-specific tubular side racks are designed to provide a more unobtrusive mounting solution for the GIVI Monokey side cases. These side racks are custom designed for select individual motorcycle models. The sleek design and integrated look help to maintain the narrowest possible profile for your motorcycle with the side cases mounted while keeping a simple and clean look after the side cases are removed. Alth...
This stylish well-constructed replacement windscreen features improved height and shape with top-notch quality. Mounts in minutes using stock fasteners. Features clear tint and precision-cut shape.
The GIVI PL185 Tubular Side Case Racks are designed to provide a more unobtrusive mounting solution for the GIVI Monokey side cases. These side racks are custom designed for select individual motorcycle models. The sleek design and integrated look help to maintain the narrowest possible profile for your motorcycle with the side cases mounted while keeping a simple and clean look after the side cases are removed. Altho...
This stylish well-constructed replacement windscreen features improved height and shape with top-notch quality. Mounts in minutes using included fitting kit. Features clear tint and precision-cut shape. Overall height is 33.1" (840mm) approximately 6.3" (160mm) higher than original windscreen; maximum width is 26.8" (680mm).
The GIVI PL528 Tubular Sidecase Racks are designed to provide a more unobtrusive mounting solution for the Givi Monokey side cases. These side racks are custom designed for select individual motorcycle models. The sleek design and integrated look help to maintain the narrowest possible profile for your motorcycle with the side cases mounted while keeping a simple and clean look after the side cases are removed. Althou...
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
