R&G Engine Case Covers are AMA Pro Racing approved. This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the right hand side (RHS) crank case cover. Crafted from 4mm polypropylene for maximum grou...
The DENALI SoundBomb split dual-tone air horn produces an earsplitting 120 decibels of sound (four times louder than your typical motorcycle horn!) in a compact two piece design for motorcycles that have a limited amount of space. Ear splitting performance demands attention to make your presence known and keep you safe from traffic that might have failed to notice. A 3 foot length of air line is included to allow t...
At 113 decibels the distinct low-tone sound from the DENALI SoundBomb Mini Motorcycle Horn is twice as loud as a typical 100 decibel disc horn. Designed to be a direct Plug & Play upgrade from your factory horn requiring no additional relay or wiring harness as long as the original horn has blade-style electrical connections. When stock isn't quite enough be heard with the SoundBomb Mini.
The DENALI switched power adapter connects to your BMW's GPS power connector (on bikes with Nav preparation) to provide a CANbus safe switched 12V power source for triggering a relay to power DENALI lights PowerHubs or other electronic accessories. The pre-installed Posi-lock connector means you will not have to tap pierce cut or solder any original wires. The BMW GPS power source is switched with the ignition
...
This DrySpec Motorcycle Tool Tube Kit attaches directly to the outside of any flat-sided sidecases and can be used to carry our MSR 30 oz. Fuel Bottle and any other gear that can fit inside of it.
This DENALI Motorcycle Engine Guard/Crash Bar Light Mount Kit allows fitment of any DENALI LED Lights to engine guards crash bars or any tube 21mm-29mm (0.826in-1.125in) in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional fully rotatable mounting shelf to create a super versatile and robust light mount
...
Fork damage is not only expensive but can put a quick end to your well planned adventure or day at the track. Prevent damage to the fork bottoms and brake calipers of your motorcycle with R&G Fork Protectors.
If you’re looking for high quality engine case protection for your motorcycle that also looks good then grab the R&G engine case cover kit. This kit includes the left hand side (RG.ECC0117BK...
These spindle sliders mount directly to the rear spindle on the Ducati Scrambler '15-, Urban Enduro '15-'17, Monster 797 '17- , Scrambler 1100 '18-25, Scrambler 1100 Pro '20-25, Desert Sled '18-, Scrambler 800 Full Throttle ’26-, 10th Anniversary Rizoma Edition ’26-, Scrambler Icon ’26-, Scrambler Icon Dark ’26- & Scrambler Nightshift ’26- their expanding design allows for easy installation into each side of the swingarm spindle hollow.Protecting the swingarm and swingarm components (like the brakes and drivetrain) in the event of a crash or drop.As well as providing essential protection, they also double up as paddock stand bobbins allowing you to perform routine maintenance and cleaning on your motorcycle easily.
These spindle sliders mount directly through the rear spindle on the Yamaha MT-07 '14- '24 (FZ-07), Yamaha MT-07 Motocage '15-, Yamaha XSR700 '16- & R7 '22-25 models.Protecting the swingarm and swingarm components (like the brakes and drivetrain) in the event of a crash or drop.Aswell as providing essential protection, they also double up and Paddock stand bobbins allowing you to perform routine maintenance and cleaning on your motorcycle easily.
This model comes as a pair of guards to protector both the left and right hand side radiators found on the BMW R1200GS '13-, BMW R1250 GS '18- & R1250RT '19- models.The R&G Stainless Steel Radiator Guard series is a more rugged version of our existing aluminium offering and are aimed particularly for Adventure bikes. Constructed from stainless steel allows the guard to be incredibly strong and impervious to rust – perfect for bikes and riders who may tackle demanding terrains and conditions. The laser-cut grills are designed for maximum airflow to the radiator so that cooling isn't compromised; the Radiator Guard is as good looking as it is purposeful.The CNC finished guard attaches easily and quickly to the front of the radiator, either by utilizing the existing mounting bolts or cable tied on.
These swingarm protectors are suitable for the BMW F800GS '24-/ S1000RR '18-, BMW S1000RX, BMW HP4, BMW F750GS'18-/F850GS '18-'25/ F850GSA 19-25, F900GS '24- F900 R/XR '20-, F900GSA '24- & S1000R '14- / Sport/ , M1000XR '24/ M Sport '21- '24, M1000RR '21- '24, M1000R '23-, Suzuki GSXR 600 K6-, 750 '06- '24, 1000 K5-, Yamaha MT-10 '16-, SP '17-, Suzuki DL1000 V-Strom '14-,Yamaha Niken '18- & Voge DS900X '24- (with the larger internal spindle diameters of 16mm and 24mm). They fit to the rear spindle and provide added protection to the swingarm area.
Are your led micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you may find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.Note: We highly recommend buying this product when purchasing LED micro / mini indicators in order to save any disappointment when fitting.NO wire cutting or soldering is required, these resistors fit inline.** Supplied as a pair **These resistors are for the R&G LED Indicators. If you have R&G Bulb indicators, please use RGR0001
This R&G Radiator Guard is available in black for the Kawasaki Ninja H2 SX '18- '24 & Kawasaki ZH2 '20- '24 models. They are made from pressed aluminium and feature a neat, seamless frame (where applicable). They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris.
R&G Radiator Guards are available in black to fit the Honda CBR600RR '13-21.Made from pressed aluminium and feature a neat, seamless frame (where applicable). They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris. No permanent modifications need to be made to the bike.Available in Black or Titanium finishes.
R&G Radiator Guards are made from aluminium, improve looks and protect your expensive and vulnerable radiator from flying debris.This radiator guard is suitable for Suzuki GSX-R600 K6 onwards & GSX-R750 '04- '24 onwards.
Lose your mirrors for that rebellious look or simply to stop your fairings flapping whilst on track days or racing!Made from aluminium, these neat little blanking plates fit over the mounting point for the mirrors and can be fitted in seconds. (comes supplied with bolts for installation)This product is suitable for the Kawasaki Ninja 650 '21-, Ninja 400 '18-, Ninja 300 '12-, Ninja 250 '13-, Ninja 125 '19-, ZX6R 636 '13-, Ninja 7 Hybrid/HEV '24-, Ninja 250SL '14-, ZX-25R '20- & ZX-4R(R) (SE) ’23-
Radically tidy up the rear end of the Kawasaki Z650 '17-'24 & Ninja 650 '17- '24 models with this R&G Tail Tidy. Its stainless steel and matte black powder coated construction and design ensures long lasting durability and performance.R&G tail tidy unit is easy to fit and will radically transform the rear end of the bike, removing the expansive (and often ugly!) OEM licence plate holders - replacing them with a much sleeker looking unit, tucking the number plate underneath the rear seat unit, for a much more stylish sporty look.
Tidy up the rear end of the Yamaha R25 '14-, MT-25 '15-, MT-03 '16- and R3 '15- models with an Aluminium R&G Tail Tidy/Licence Plate Holder. Made from Aluminium for strength and weight saving, powder coated black for great looks and durability. Our tail tidy units are easy to fit and transform the rear of the bike removing the expansive OEM licence plate holders replacing them with a much slicker looking unit, tucking the number plate up underneath the rear seat unit. This model is suitable for the Yamaha R25 '14-, MT-25 '15-, MT-03 '16- and R3 '15-, and can be fitted with either OEM indicators or our own R&G aftermarket micro/mini indicators (RG370/RG371/RG372) - please see related products for more details.
Tidy up your bike's rear end with this R&G Tail Tidy/Licence Plate Holder for the Honda CBR300R '14-.Made from 3mm Aluminium, it includes a rear number plate illuminator. Powder coated black for durability and a high quality finish. Designed using the latest 3D scanning technology for an exact fit.Compatible with both the OEM or R&G Micro indicators (RG370/RG371/RG372).
Tidy up your bike's rear end with this R&G Tail Tidy/Licence Plate Holder for the Honda CBR500R '13-'15, CB500F '13-'15 CB400X '19- and CB500X '13-'19.Made from an ABS plastic injection moulded tail unit and light surround with an aluminium plate (powder coated black for durability and a high quality finish) to support the number plate. Designed using the latest 3D scanning technology for an exact fit.Supplied with a “plug & play” connector for installing the E-marked licence plate light (included).The installation of this tail tidy requires modification to the subframe, however the structural integrity of the subframe is not affected (see photo7 in gallery - which highlights the area that required modification).Compatible with OEM or R&G Micro indicators (RG370/RG371/RG372).
Tidy up your bike's rear end with this R&G Tail Tidy/Licence Plate Holder for the Triumph Street Triple 660 S '17-'22, Street Triple 675 '13-, Triumph Daytona 675 '13-, Triumph Street Triple R / RS 765 '17-, Street Triple S 765 '17-'20, Triumph Daytona Moto2™ 765 '20- models.Made from stainless steel and powder coated black for durability and a high-quality finish. Supplied with a “plug & play” connector for installing the E-marked licence plate light (included).Compatible with either OEM and R&G micro indicators.
This Tail Tidy is suitable for the Honda CBR600RR ('03-'06 models) and CBR1000RR Fireblade (2004-2007 models).Replacing the stock licence plate holder with a much smaller licence plate holder giving the bike back its sporty look!
This Kaoko Throttle Stabilizer kit is designed to fit the Yamaha Tenere World Rally(T7) '23-, Tenere 700 '19- '24, Tenere 700 World Raid '22-, Tenere 700 Rally '21- '24 & 1200 Super Tenere (with OEM hand guards).
These fork protectors are suitable for the Kawasaki Z650 S ‘26-, Ninja 7 Hybrid HEV / Z 7 Hybrid HEV '24-, Z650 '17-, Ninja 650 '17- & Z650RS '21- modelsEasy to install, they simply install onto either side of the spindle connected by a tie bar helping eliminate damage to the front forks, fork bottoms, disc, fork bottoms and brake callipers from a crash or drop or slide.
This 2pcs Boot Guard kit has been specially designed for the Kawasaki ZX-6R '19- model.R&G Boot Guard kits are available for a large range of bike styles and brands, with new applications released regularly. The unique R&G texture was specifically designed to be durable, providing the rider with a buffer between his boot on the exposed areas of the swingarm which can (on occasion) come into contact with each other during cornering causing wear and unwanted damage to the swingarm or boots (both expensive to fix!).Made in the UK.
These R&G Cotton Reels mount directly into the paddock stand mounting points on the rear swingarm and are suitable for the Kawasaki KLE500 '26-, KLE500 SE ’26-, BMW S1000RR '10-, S1000R '23- , HP4 & M1000R '23-, Triumph Trident Street Triple 660 S '17-'22, 800 '26-, Trident 660 ‘26-, Street Triple '13-,R/RS 765 '17-, Street Triple S 765 '17- '20, Street Triple 765 RX '26-, Royal Enfield Interceptor 650 ’19- and Continental GT 650 ’19-,S1000R M Sport '21- '24 models. Providing crash protection to the swingarm and swingarm components as well as allowing the ability to lift the motorcycle up on a paddock stand for chain cleaning/maintenance, motorcycle cleaning, tyre changes and much more!
Available in Black, White or Orange finishes. R&G Cotton Reels locate on the paddock stand mounting points on the rear swingarm, offering protection and functionality in one product. Protecting the swingarm and drive components - keeping them off the ground in case of a crash or drop, as well as working as paddock stand points for lifting the rear of the bike onto a paddock stand for tyre removal, chain adjusting/lubrication and bike cleaning!
R&G Aero Crash Protectors feature our stylish, aerodynamic Aero Bobbins and are available in black or white. Suitable for the Honda CBR500R '19- (not e-clutch) models.R&G Crash Protectors offer core motorcycle protection, keeping the frame, engine, fairing and other critical components off the ground in the event of a crash, drop or slide.
R&G Aero Crash Protectors feature our stylish, aerodynamic Aero Bobbins and are available in Black or White options. Suitable for the Kawasaki Z900 '17- & Z900 SE '22- models.R&G Crash Protectors offer core motorcycle protection, keeping the frame, engine and other critical components off the ground in the event of a crash, drop or slide.
These crash protectors feature our stylish, aerodynamic Aero Bobbins and are available in Black bobbins. Suitable for the Yamaha YZF-R1/R1M '15- models. Utilising specially designed spacers allowing for an easy, hassle-free installation, putting the protection exactly where it's needed for maximum effectiveness.R&G Aero Bobbins from R&G - the market leaders in crash protection and the only insurance-approved crash protectors on the market. As used by some of the world's top race teams, what better endorsement do you need! R&G – innovation not imitation!
These bar end protectors have been specially developed for the Yamaha R25 '14-, MT-25 '15-, Yamaha R3 '15-, MT-03 '16- and NMAX 125 '17- models.Helping to protect those expensive levers and handlebars from damage in the event of a drop or crash.Easy to install they simply screw into the end of the OEM bars.
Protect your bars with our great little bar end sliders/protectors. Suitable for Renthal bars, LSL bars, Ducati 848 '08- / Ducati Diavel (2011-), Monster 1200 & S '14-, KTM RC125/200 '14- & Fantic Caballero 500 Scrambler '19- Please Note, if fitting to a bike with closed ended grips, Modification will be required to install these bar ends.
These bar end protectors are suitable for the Honda CBR1000RR-R Fireblade & Fireblade SP '20-, CBR400, CB500 (models produced up to 2002), CBF500, CBF600 '08, CBF1000 ABS 2006-, CBF1000GT '08 (faired),CBR600, CBR600RR 2003-2009, CB250 Hornet, CB600 Hornet, CBF600, CB900 Hornet, CB1300, CBR900 Fireblade 1992-2003, CBR1000RR Fireblade 2004-2009, CB1000R '08-'09, VFR800i 1998-2001, VFR800 V-TEC, VFR800 Interceptor, VTR1000 models and the CBR1100 Blackbird.Please be aware this kit requires the use of OEM bolts to secure the bar end to the clip-on.
These bar end protectors are suitable for the Suzuki GSX-R600, GSX-R750, GSX-R1000, GSX-S1000 '15-'20, SV650 '16-, SV650X '18-, Gladius 650 '09- and Katan '19- models.Please be aware this kit requires the use of OEM bolts to secure the bar end to the clip-on.
Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
CR PRO Series Driving Lights combine insane light output with a unique dual-function design and swappable multi-beam & multi-color lens system to deliver the brightest and most versatile lights to hit the market. The CR-7 PRO packs over 23,000 lumens per pair into a rugged low-profile 4.5″ housing. Multi-Function Done Differently Say goodbye to outdated backlighting […]
Harness the flexibility and intelligence of your BMW motorcycle’s CAN bus electrical system to make installation of accessories drastically easier with the new and improved DENALI CANsmart™ Controller GEN II. The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled […]
