“Kaoko Throttle Stabilizer Cruise Control for Victory Models up to 2007 | Torpedo Style, Chrome with Opposite Bar End Weight” has been added to your cart. View cart
Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
Similar in shape to the original windscreen the MRA TouringScreen includes a raised extension approximately 2-3 inches (5-7 cm) taller than the original windscreen. Available in clear smoke gray and gloss black.
Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
The VarioTouringScreen features a 7-position adjustable spoiler at the top of a TouringScreen-shaped windshield. The adjustable spoiler can be used to redirect airflow to suit the rider. Available in clear or smoke gray only.
Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
The MRA SpoilerScreen is a flat sport-styled windshield with a deep recess in the center and a small spoiler in the center. Available in clear smoke gray and gloss black.
Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
Taller than the manufacturer windshield the MRA Vario Touring Screen for your Yamaha T-Max 500 motorcycle features an adjustable spoiler that can be moved to 7 different positions. Adjusting easily without tools this allows you to fine tune the air flow so that it's free from turbulence buffeting or irritating wind noise. The windscreen has been developed through extensive wind tunnel testing to enhance the aero...
Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
The VarioTouringScreen features a 7-position adjustable spoiler at the top of a TouringScreen-shaped windshield. The adjustable spoiler can be used to redirect airflow to suit the rider. Available in clear or smoke gray only.
Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
The VarioTouringScreen features a 7-position adjustable spoiler at the top of a TouringScreen-shaped windshield. The adjustable spoiler can be used to redirect airflow to suit the rider. Available in clear or smoke gray only.
Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
The VarioTouringScreen features a 7-position adjustable spoiler at the top of a TouringScreen-shaped windshield. The adjustable spoiler can be used to redirect airflow to suit the rider. Available in clear or smoke gray only.
Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
Similar in shape to the original windscreen the MRA TouringScreen includes a raised extension approximately 2-3 inches (5-7 cm) taller than the original windscreen. Available in clear smoke gray and gloss black.
Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
The MRA SpoilerScreen is a flat, sport-styled windshield with a deep recess in the center and a small spoiler in the center. Available in clear, smoke gray and gloss black.
Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
The MRA SpoilerScreen is a flat sport-styled windshield with a deep recess in the center and a small spoiler in the center. Available in clear smoke gray and gloss black.
Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
The MRA SpeedScreen windscreens are available in clear smoke gray and gloss black. 12.2" (309mm) tall x 15.75" (398mm) middle width x 13" (330mm) top width.
Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
Similar in shape to the original windscreen the MRA TouringScreen includes a raised extension approximately 2-3 inches (5-7 cm) taller than the original windscreen. Available in clear smoke gray and gloss black.
Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Fits all Harley-Davidson bikes with original 7/8" inner diameter (ID) handlebars. Includes throttle lock & matching left-side handlebar weight. Available in black (HDBBB) or chrome (HDBBC).
Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Fits all Harley-Davidson bikes with original 7/8" inner diameter (ID) handlebars. Includes throttle lock & matching left-side handlebar weight. Available in black (HDCBB) or chrome (HDCBC).
Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Fits all Harley-Davidson bikes with original 7/8" inner diameter (ID) handlebars. Includes throttle lock & matching left-side handlebar weight. Available in black (HDTB) or chrome (HDTC).
This adapter is designed to prevent electrical accessories from interfering with the electrical system on late model BMW Ducati and other European motorcycles with a Can-BUS electrical system and a "City Light" 194 marker bulb in the headlight. Please Note: Only compatible with bikes that use a 194 marker bulb and have a "universal" bulb connector; will not fit bikes wi...
Our custom-fit brackets for the KLR650E provide the perfect mounting location for auxiliary driving lights. Suitable for smaller lights like the DENALI D2 2.0 and DM 2.0.
Are they swingarm spools or axle sliders? Well they are both really!! The spool is mounted to a special black-anodized aluminum bracket (included with the kit). The product will give protection to the rear axle and swingarm area in a crash. When not protecting your investment the "cotton reel" can be used to lift the motorcycle using a rear stand with hooks. For rear wheel removal you can take the Cotton Reels out ...
R&G engine case slider for Honda CBR600RR '07-'08. This engine protector was designed to fit the right hand side (RHS) case cover. Left hand case slider also available here: RG.ECS0029BL Crafted from High Density Nylon for strength durability and good looks. They compliment the R&G crash protectors perfectly. The covers simply bolt on over the original engine casing. Slimline for maximum ground clearance u...
The Denali Interlink Pod Adapter allows you to link up to 4 Denali D1 Pods to each other with the integrated linking channel designed into the Denali D1 housing.
The R&G indicator adapters for Triumph Speed Triple & Speed Triple R are made to be used on conjunction with the LP0099BK tail tidy Arrow exhaust and the original turn signals.
Increase student confidence & protect levers grips and handlebars. The Barkbusters lever guards for training bikes are an essential ally in protecting the most vulnerable parts during drops and crashes. Special Discounts are available for motorcycle training fleets.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight.
R&G Front Axle Sliders / Protectors for Honda VFR1200F '10-'14. These fork protectors were designed to help eliminate damage to the front axle during a drop a skidding stop or a "Low Side".
PLX sideracks hug the tailsection of your bike tighter than any previous mounting system from Givi and are compatible only with Givi PLX sidecases like the Givi V35.
Are they swingarm spools or axle sliders? Well they are both really!! The spool is mounted to a special black-anodized aluminum bracket (included with the kit). The product will give protection to the rear axle and swingarm area in a crash. When not protecting your investment the "cotton reel" can be used to lift the motorcycle using a rear stand with hooks. For rear wheel removal you can take the Cotton Reels out o...
This wiring harness comes with everything you need to wire two single intensity DENALI LED pods (DM, DR1 & D4), including relay and lighted on/off switch for handlebar mounting.
Please Note: This product is no longer available for purchase.This "Plug & Play" wiring harness allows you to activate the radiator fan at any time via a handlebar-mounted switch.
GIVI BF04 Tanklock motorcycle specific mounting ring allows the GIVI Tanklock tank bags to hover over your tank to protect the finish. To be used on Kawasaki motorcycles.
R&G Front Axle Sliders / Protectors for Yamaha WR250X. These fork protectors were designed to help eliminate damage to the front axle during a drop a skidding stop or a "Low Side".
High-density black rubber backrest for the Givi B33 cases. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue.
R&G Front Axle Sliders / Protectors for MV Agusta F4 '06-'11 Brutale 750 & Brutale 910. These fork protectors were designed to help eliminate damage to the front axle during a drop a skidding stop or a "Low Side".
Replace the bars for your motorcycle's Barkbusters EGO Handguards. EGO lever protection by Barkbusters provide a close fit in order to enable tighter trail riding. EGO Handguards are ideal for Enduro, Trail and mini bikes but are not suitable for motorbikes with full length levers due to the narrow clearances provided by the smaller profile.
This "Plug & Play" bike-specific wiring harness replaces the fragile OEM glass fuses and puts all 3 in a conveniently accessible location that does not require you to peel the bike apart for access.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight.
Tidy up the rear of your bike with the fender eliminator "Tail Tidy" with an integrated license plate holder! This "Tail Tidy" fits the Hyosung GT125R '09- GT250R '09- GT650 09-
This Carbon DuPont™ Kevlar® engine protector was designed to fit the left hand side (LHS) case cover. Left hand case slider also available here: RG.ECS0035BK Crafted from High Density Nylon for strength durability and good looks. They compliment the R&G crash protectors perfectly. The covers simply bolt on over the original engine casing. Slimline for maximum ground clearance ultra lightweight matte finis...
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight.
Please Note: This product is no longer available for purchase.This Kaoko Cruise Control is purpose-built for the Can-Am Spyder with No Magic Neon/Custom Dynamics handlebar riser installed. The throttle lock consists of a friction nut with an integrated replacement handlebar-end weight.
R&G engine case slider for Suzuki GSXR600 '06-'10 GSXR750 '06-'10. This engine protector was designed to fit the right hand side (RHS) case cover. Left hand case slider also available here: RG.ECS0026BK Crafted from High Density Nylon for strength durability and good looks. They compliment the R&G crash protectors perfectly. The covers simply bolt on over the original engine casing. Slimline for maximum gr...
R&G Engine Case Covers are AMA Pro Racing approved. This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the left hand side (LHS) crank case cover. Crafted from 4mm polypropylene for maximum groun...
Constructed of heavy-duty machined steel aluminum and high-density nylon R&G frame sliders provide maximum protection and high quality fit and finish. R&G "Aero" sliders have an aerodynamic teardrop shape for a more streamlined look than traditional cylindrical slider pucks.
Manufactured using high density polyethylene and installs without having to drill holes in your fairing the R&G aero style "no cut" frame sliders are perfect for your 2009-2011 Kawasaki Ninja 650R. Designed with a distinctive “teardrop” shape these sliders have more of streamlined look than your average round ones. A uniquely designed bracket moves the location of the frame slider away from the mounting point to a ho...
Maximize your potential tune your machine to your exact requirements. R&G Racing Adjustable Rearsets are milled out of lightweight aluminium for high strength and durability. These adjustable rearsets provide the option to assemble with racing or "GP shift" pattern(1 up - 5 down) or road setup as standard (1 down - 5 up). Our rearsets provide large adjustments and exact positioning to suit every rider (11 positions)....
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight.
R&G engine case slider for Triumph Speed Triples & Tiger 1050. This engine protector was designed to fit the right-hand side (RHS) case cover. Left hand case slider also available here: RG.ECS0020BK Crafted from High Density Nylon for strength durability and good looks. They compliment the R&G crash protectors perfectly. The covers simply bolt on over the original engine casing. Slimline f...
R&G Engine Case Covers are AMA Pro Racing approved. This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the left hand side (LHS) crank case cover. Crafted from 4mm polypropylene for maximum groun...
Constructed of heavy-duty machined steel aluminum and high-density nylon R&G frame sliders provide maximum protection and high quality fit and finish. R&G "Aero" sliders have an aerodynamic teardrop shape for a more streamlined look than traditional cylindrical slider pucks.
Maximize your potential tune your machine to your exact requirements. R&G Racing Adjustable Rearsets are milled out of lightweight aluminium for high strength and durability. These adjustable rearsets provide road setup as standard (1 down - 5 up). Our rearsets provide large adjustments and exact positioning to suit every rider (11 positions). Designed to be easily installed. Powdercoated in black with crisp white R&...
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Fits models with bar end weights. Does not fit R1200C R1200CLC or other models with end caps.
Laser-cut from mild steel and powder coated black this light mounting bracket is both strong and attractive. The kit allows fitment of the two smaller members of the Denali LED Lighting family (the DM and D2) to the BMW R1200RT.
R&G Engine Case Covers are AMA Pro Racing approved. This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the left hand side (LHS) crank case cover. Crafted from 4mm polypropylene for maximum groun...
Constructed of heavy-duty machined steel aluminum and high-density nylon R&G frame sliders provide maximum protection and high quality fit and finish. R&G "Aero" sliders have an aerodynamic teardrop shape for a more streamlined look than traditional cylindrical slider pucks.
Tidy up the rear of your bike with the fender eliminator "Tail Tidy" with an integrated license plate holder! This "Tail Tidy" fits the Honda CBR125R '11-'14
Constructed of heavy-duty machined steel aluminum and high-density nylon R&G frame sliders provide maximum protection and high quality fit and finish. R&G "Aero" sliders have an aerodynamic teardrop shape for a more streamlined look than traditional cylindrical slider pucks.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Also fits other models with 22mm or 30mm outside diameter (OD) bar-end weights and 17mm diameter bar end weight threads.
R&G Engine Case Covers are AMA Pro Racing approved. This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the right hand side (RHS) crank case cover. Crafted from 4mm polypropylene for maximum grou...
R&G Front Axle Sliders / Protectors for Suzuki Bandit 650 '07-'10 & GSX650F '08-'10. These fork protectors were designed to help eliminate damage to the front axle during a drop a skidding stop or a "Low Side".
Tidy up the rear of your bike with the fender eliminator "Tail Tidy" with an integrated license plate holder! This "Tail Tidy" fits the Suzuki DR-Z400 & DR-Z400SM
Maximize your potential tune your machine to your exact requirements. R&G Racing Adjustable Rearsets are milled out of lightweight aluminum for high strength and durability. These adjustable rearsets provide the rider with a "Street Shift" (1 down - 5 up) pattern. Should you require the race or "GP Shift" (1up - 5 down) pattern please see the R&G S1000RR and S1000R Racing Rearset (RG.RSET04BK).
