Our new D3 LED lights are built upon a decade of DENALI innovation to deliver the highest performing 36-watt street-legal driving light to hit the market.
Our ground-breaking DialDim™ Lighting Controller features a multicolor halo dimming switch that allows you to independently turn on/off and dim two sets of auxiliary lights from a single consolidated wiring harness.
Our new D3 LED lights are built upon a decade of DENALI innovation to deliver the highest performing 36-watt street-legal driving light to hit the market.
DENALI Slip-On Blackout Covers keep your bike street legal in states that require aftermarket lighting to be covered on public roads. Once you get to the trails, slip the covers off of your DENALI D7 or D7 Pro lights and go. The rugged silicone construction of the Slip-On Covers protect from rocks and other debris, […]
This TriOptic™ Lens Kit for D3 driving lights is designed to maximize visibility in foggy and rainy conditions. The lens colors increase visibility in fog and rain by blocking blue frequencies from the light, which reflect off water vapor and decrease vision. The kit includes two spot lenses and two True-Hybrid™ lenses. Use two spots for maximum distance, […]
The DENALI horn mount is a bike-specific mounting kit for installing Denali SoundBomb Split Dual-Tone Air Horn. All mounting hardware and instructions included. For easy wiring check out the Plug-n-Play wiring kit. Use this slick horn mount for the cleanest looking installation possible...
DENALI Slip-On Blackout Covers keep your bike street legal in states that require aftermarket lighting to be covered on public roads. Once you get to the trails, slip the covers off of your DENALI D4 lights and go. The rugged silicone construction of the Slip-On Covers protect from rocks and other debris, providing an even longer […]
This Lens Kit for the D3 fog lights is designed to maximize visibility in foggy and rainy conditions. Both lens colors increase visibility in fog and rain by blocking blue frequencies from the light, which reflect off water vapor and decrease vision. What’s In The Box? 2x D3 Fog Lenses (Yellow) *Note: This D3 fog lens is only compatible […]
The T3 is a unique and innovative approach to the common turn signal, blending white visibility lighting, red brake lighting, and amber turn signal lighting into one compact housing.
This DENALI MT Series 3-Pin Female Waterproof Connector Pigtail can be used to to modify, customize, or replace electrical connections. The connector is pre-assembled with 3 inch 18 AWG wires exiting the connector which can be soldered onto the light or accessory of your choice. Note: Crimp-on 3-Pin Connector Sets are also available for purchase. What’s […]
The T3 is a unique and innovative approach to the common turn signal, blending white visibility lighting, red brake lighting, and amber turn signal lighting into one compact housing.
This TriOptic™ Lens Kit for D3 driving lights is designed to maximize visibility in foggy and rainy conditions. The lens colors increase visibility in fog and rain by blocking blue frequencies from the light, which reflect off water vapor and decrease vision. The kit includes two spot lenses and two True-Hybrid™ lenses. Use two spots for maximum distance, […]
The T3 is a unique and innovative approach to the common turn signal, blending white visibility lighting, red brake lighting and amber turn signal lighting into one modular system. The front T3 turn signal pods feature super bright white running lights that switch to amber when your turn signal is activated, while the rear T3 signal […]
This 3pcs Boot Guard kit has been specially designed for the Aprilia RS660 '21- models, protecting the swingarm from unwanted scuffs and marks.R&G Boot Guard kits are available for a large range of bike styles and brands, with new applications released regularly. The unique R&G Boot Guard texture was specifically designed to be durable, providing the rider with a buffer between his boot on the exposed areas of the swingarm which can (on occasion) come into contact with each other during cornering causing wear and unwanted damage to the swingarm or boots (both expensive to fix!).Please note: R&G Boot Guards now come with a 25mm diameter stick-on emblem.Made in the UK.
This 2-pcs Boot Guard kit has been specially designed for the Aprilia Tuono V4 1100 '21- models, protecting the swingarm from unwanted scuffs and marks.R&G Boot Guard kits are available for a large range of bike styles and brands, with new applications released regularly. The unique R&G Boot Guard texture was specifically designed to be durable, providing the rider with a buffer between his boot on the exposed areas of the swingarm which can (on occasion) come into contact with each other during cornering causing wear and unwanted damage to the swingarm or boots (both expensive to fix!).Please note: R&G Boot Guards now come with a 25mm diameter stick-on emblem.Made in the UK.
This Lens Kit for the D3 fog lights is designed to maximize visibility in foggy and rainy conditions. Both lens colors increase visibility in fog and rain by blocking blue frequencies from the light, which reflect off water vapor and decrease vision. What’s In The Box? 2x D3 Fog Lenses (Amber) *Note: This D3 fog lens is only compatible […]
DENALI Slip-On Blackout Covers keep your bike street legal in states that require aftermarket lighting to be covered on public roads. Once you get to the trails, slip the covers off of your DENALI S4 lights and go. The rugged silicone construction of the Slip-On Covers protect from rocks and other debris, providing an even longer […]
Our ground-breaking DialDim™ Lighting Controller features a multicolor halo dimming switch that allows you to independently turn on/off and dim two sets of auxiliary lights from a single consolidated wiring harness.
R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking.Please note: R&G Tank Traction Grips now come with a 25mm diameter stick on emblem.Made in the UK.
This R&G Carbon Fibre Tail Slider kit is compatible with the BMW S1000RR '19-'22 & M1000RR '21- models.Our Tail Sliders are made from Carbon fibre reinforced with DuPont™ Kevlar®, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tail, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.
Easy to install, they help to eliminate damage to the front forks, fork bottoms and brake calipers during a crash or drop.These fork protectors are suitable for the BMW S1000XR '20- model.
R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking.Please note: R&G Tank Traction Grips now come with a 25mm diameter stick on emblem.Made in the UK.
The T3 is a unique and innovative approach to the common turn signal, blending white visibility lighting, red brake lighting and amber turn signal lighting into one modular system. The front T3 turn signal pods feature super bright white running lights that switch to amber when your turn signal is activated, while the rear T3 signal […]
Radically tidy up the rear end of the Tail Tidy for Kawasaki Ninja 1000SX ’20-R&G tail tidy unit is easy to fit and will radically tidy up the rear end of your Kawasaki Ninja 1000SX ’20-, removing the expansive (and often ugly!) OEM licence plate holders - replacing them with a much sleeker looking unit.
Never forget your sidestand puck again! Kickstand Shoes bolt onto the bottom of the sidestand, to enlarge the original’s footprint by up to 100%, significantly spreading the load placed upon it, to help prevent the stand ‘piercing’ the ground. Despite this enlargement, the Shoe does not affect ground clearance or interfere with the chain run during normal riding. Available for nearly 100 different bikes, covering popular adventure, sports, naked and touring machines, each Shoe is bespoke to the intended bike and sandwiches the existing stand foot with an aluminium bottom level to prevent corrosion and is topped with a stainless steel lid for strength. The product can be fitted in minutes as it is clamped together with three countersunk Allen bolts. This particular kickstand shoe has been precision machined to fit the Triumph Scrambler 1200 XC/XE '19- models.
Our ground-breaking DialDim™ Lighting Controller features a multicolor halo dimming switch that allows you to independently turn on/off and dim two sets of auxiliary lights from a single consolidated wiring harness.
Our ground-breaking DialDim™ Lighting Controller features a multicolor halo dimming switch that allows you to independently turn on/off and dim two sets of auxiliary lights from a single consolidated wiring harness.
R&G Aero Crash Protectors feature our stylish, aerodynamic Aero Bobbins and are available in Black. R&G Crash Protectors offer core motorcycle protection, keeping the frame, engine, fairing and other critical components off the ground in the event of a crash, drop or slide.R&G Aero Bobbins are a stylish, aerodynamic, teardrop shaped bobbin improving on the original good looks of our highly successful and popular standard round bobbins. Fitted with a removable end cap which hides the bobbins fittings, this sleek design looks superb and is a winner on road and track!R&G Aero Bobbins from R&G Racing - the market leaders in crash protection and the only insurance approved crash protectors on the market. As used by some of the worlds top race teams, what better endorsement do you need! R&G Racing – innovation not imitation!
This R&G Carbon Fibre Tail Slider kit is compatible with the Aprilia Tuono V4 (FACTORY) / RSV4 (FACTORY) '21- models.Our Tail Sliders are made from Carbon fibre reinforced with DuPont™ Kevlar®, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tail, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.
This yoke plug insert is suitable for the Aprilia RSV4 1100 Factory '19- & Moto Guzzi V85TT '19-A "must have" to give that Stem Nut of yours a finished look. Covering the stock Yoke Stem Nut and securing in place thanks to its ribbed design ensures a tight fit that won't fall out or move. Finished in Black. Sold as a single.
This vehicle specific driving light mount allows you to mount any DENALI driving light in the optimum location on your motorcycle. This kit includes beefy powder coated steel brackets with and M8 mounting hole and all necessary mounting hardware. Vehicle Fitment KTM 390 Adventure 2020-2021
These spindle sliders mount directly through the rear spindle axle of the Yamaha Tenere 700 '19-'21 providing both crash protection to the rear components, protecting the swingarm and components, like the brakes and drivetrain in the event of a crash or drop but also functioning as paddock stand bobbins, allowing the bike to be lifted up on a Rear Paddock Stand for cleaning and maintenance. The best of both worlds!
Radically tidy up the rear end of the Tail Tidy for Honda CRF1100L Africa Twin Adventure Sports and CRF1100L Africa Twin Standard Model '20- with this R&G Tail Tidy. R&G tail tidy unit is easy to fit and will radically transform the rear end of the bike, removing the expansive (and often ugly!) OEM licence plate holders - replacing them with a much sleeker looking unit.
This 3-piece R&G Headlight Shield has been specially designed to fit Aprilia RS660 '21-, Tuono 660 '21-, Tuono 1100 '21- & RSV4 1100 Factory '21- models. R&G Headlight shields are engineered for protection and style. Protecting your expensive headlights from debris kicked up from the road, our headlight shields are easy to fit, with no modification needed to your bike and they are easily removed for cleaning. R&G Headlight Shields are made from clear acrylic and specially designed to fit a range of bikes that's ever-growing.
R&G Second Skin Tank Protection kit is a non-yellowing (UV Stable), ultra-tough, easy-to-apply, polyurethane protective film. Designed to protect the paint against rubbing from clothing & motorcycle leathers. R&G Second Skin Tank Protection kit is easy to install when used in conjunction with the advanced fitting solution (included). R&G Second Skin Tank Protection kit is […]
Our ground-breaking DialDim™ Lighting Controller features a multicolor halo dimming switch that allows you to independently turn on/off and dim two sets of auxiliary lights from a single consolidated wiring harness.
Our Carbon Swingarm Guards are made from Carbon fibre reinforced with DuPont™ Kevlar®. Not only do they look great, but they also offer protection to a very expensive part to replace! Specially moulded to fit perfectly onto the swingarm, they are designed to fit where the exhaust may come into contact with the swingarm in […]
This left-hand side R&G Race Series Engine Case Cover fits the Aprilia RS660 '20-,Tuono 660 '21- &Tuareg 660 '22- (LHS Alternator Cover Road/Race Version)- models, protecting the exposed casing from damage in the event of a crash, slide or drop. These exciting new engine case Covers have been developed in collaboration with selected race teams and crash tested within the R&G Racing Suzuki GSX-R Trophy. Crafted from 4mm polypropylene for strength, durability and good looks.R&G's Race Series Engine Case Covers have been specially developed at the request of race teams and riders alike. They include a replaceable puck or slider on the impact face, giving the case not only more meat to grind through to further enhance the protection offered by a standard R&G Engine Case Cover but also offering an easy low-cost fix should you only have a "minor" slide, crash or drop. Engineered to allow just the "puck" to be replaced and your cover to be reused again and again!
Our all-new Stainless Steel Bar Endshave been specially developed and shaped for your bike - slightly heavier than the original bar ends, for less vibration.The stainless steel finish with lasered R&G logo gives you the ultimate corrosion protection, whilst looking great and helping to protect those expensive levers and clip-ons from damage in the event of a drop or crash.Suitable for Kawasaki Z900RS '18-, Z900 '17-, ZX636 '19-, Z H2 '20-, ZX-25R '20- & Z650RS '21-
This 2 piece R&G Tank Traction Grips have been specially designed for the Yamaha MT-09 (SP) '21- model.R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking.
R&G Second Skin Tank Protection kit is a non-yellowing (UV Stable), ultra-tough, easy-to-apply, polyurethane protective film. Designed to protect the paint against rubbing from clothing & motorcycle leathers. R&G Second Skin Tank Protection kit is easy to install when used in conjunction with the advanced fitting solution (included). R&G Second Skin Tank Protection kit is […]
The T3 is a unique and innovative approach to the common turn signal, blending white visibility lighting, red brake lighting and amber turn signal lighting into one modular system. The front T3 turn signal pods feature super bright white running lights that switch to amber when your turn signal is activated, while the rear T3 signal […]
R&G Bar End sliders have been specially designed and developed for the Royal Enfield Interceptor 650 ’19 and Continental GT 650 ’19- models. Helping to protect expensive levers and clip-ons from damage in the event of a drop, crash or slide.
This 3-piece Boot Guard kit has been specially designed for the Suzuki V-Strom 1050 & 1050XT '20- models.R&G Boot Guard kits are available for a large range of bike styles and brands, with new applications released regularly. The unique R&G texture was specifically designed to be durable, providing the rider with a buffer between his boot on the exposed areas of the swingarm which can (on occasion) come into contact with each other during cornering causing wear and unwanted damage to the swingarm or boots (both expensive to fix!).Please note: R&G Boot Guards now come with a 25mm diameter stick-on emblem.Made in the UK.
Our all-new Stainless Steel Bar Endshave been specially developed and shaped for your bike - slightly heavier than the original bar ends, for less vibration.The stainless steel finish with lasered R&G logo gives you the ultimate corrosion protection, whilst looking great and helping to protect those expensive levers and clip-ons from damage in the event of a drop or crash.Designed for theSuzuki: Bandit 600, Bandit 650, Bandit 1200, Bandit 1250, Bandit 1250GT (Faired) '08, DL650 V-Strom, DL1000 V-Strom, DRZ400, DRZ400 Supermoto, GS500, GSR600(2006 model), GSX650F, GSR750, GSX1250FA, GSX1300R Hayabusa,GSX1400 and DL1000 '14- & DL 1000XT V-STROM '17-. models
Never forget your sidestand puck again!Kickstand Shoes bolt onto the bottom of the sidestand, to enlarge the original’s footprint by up to 100%, significantly spreading the load placed upon it, to help prevent the stand ‘piercing’ the ground. Despite this enlargement, the Shoe does not affect ground clearance or interfere with the chain run during normal riding.This particular model fits the Suzuki V-Strom 1050 & 1050XT '20- models.
These Mirror Risers are made from Aluminium and are suitable the Triumph Scrambler 1200 XC/ XE '19-.Risers are perfect for increasing rearward visibility while riding. This extender raises the mirror by 45mm further up from original.Easy to fit. Simply unscrew your mirrors, screw the adaptor in place, and then refit your mirrors.Supplied as a pair.Finish: Black
As used by Performance Bikes, Fast Bikes, Superbike Magazine and MCN to name but a few. The R&G Licence Plate Holder has been designed to replace the very large, original plastic licence plate holder and improve the lines of the modern machine. The licence plate holder comes with all necessary holes drilled and all the […]
Once you have removed the pillion footrests, fill the void left behind and cover those otherwise exposed holes in the sub-frame with the R&G blanking kit.This Sethas been specially designed to cover/protect both sides with a set of 4 blanksfor the KTM 1290 Super Duke R ’20-.R&G Footrest Blanking Plates/ Kits are easy to install, simply screwing into place in-place of the rear pillion pegs, covering those otherwise exposed sub-frame holes, that if left uncovered could result in corrosion of the frame/subframe from dirt, water and debris buildup.
R&G No-Cut Aero Crash Protectors feature our stylish, aerodynamic Aero Bobbins and are available in Orange. Suitable for the RC 125 '14-'21 / RC 200 '14-'21 and RC 390 '14-'21 models.R&G Crash Protectors offer core motorcycle protection, keeping the frame, engine, fairing and other critical components off the ground in the event of a crash, drop or slide.
Our all-new Adventure Rack proves its worth through fantastic durability during demanding tours and off-road use. It features a neat, laser-cut R&G logo for extra kudos, and, expanding on and utilising the space on your bike, it is ideal for ensuring you have everything you need with you on your next big trip. Don’t go without it on your next adventure!
Our all-new Stainless Steel Bar Endshave been specially developed and shaped for your bike - slightly heavier than the original bar ends, for less vibration.The stainless steel finish with lasered R&G logo gives you the ultimate corrosion protection, whilst looking great and helping to protect those expensive levers and clip-ons from damage in the event of a drop or crash.Designed for theR&G Stainless Steel Bar Ends for Ducati Streetfighter V4 (S) '20-, Multistrada V4(S) '21-, Ducati Streetfighter V2 '22- & Husqvarna Norden 901 '22- model.
Our all-new Stainless Steel Bar Endshave been specially developed and shaped for your bike - slightly heavier than the original bar ends, for less vibration.The stainless steel finish with lasered R&G logo gives you the ultimate corrosion protection, whilst looking great and helping to protect those expensive levers and clip-ons from damage in the event of a drop or crash.Designed for theR&G Stainless Steel Bar Ends for Triumph Tiger 900 GT/ Rally '20- model.
R&G Bar End sliders have been specially designed and developed for the Triumph Scrambler 1200 XE/ XC '19- models. Helping to protect expensive levers and clip-ons from damage in the event of a drop, crash or slide.
Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filters; again potentially causing front brake engagement. All our Lever Guards, including our new Brake Lever Guards, come approved by BSB, MCRCB & MotoAmerica.
R&G Brake Lever Guard for Triumph Daytona 675, Ducati Desert Sled '18-, Suzuki V-Strom 1050 & 1050XT '20- (BLG0004)
Easy to install - taking only a minute or two. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race-approved protection for your road or track bikes. Like so many race-oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider, an R&G Brake Lever Guard is a must-have accessory.
Key Features
BSB approved.
MCRCB approved.
MotoAmerica approved.
Fit to the brake lever side.
Made from DuPont Zytel® 70G33L
Supplied with all required hardware for the bespoke and racing bar applications.
Our all-new version R&G Brake Lever Guard kit can be fitted to the brake side and comes with our bike specific fitting kit, suitable for the Triumph Daytona 675, Ducati Desert Sled '18-, Suzuki V-Strom 1050 & 1050XT '20-, holds it securely in place.
This stylish R&G Exhaust Hanger has been specifically designed for the Triumph Speed Triple 1200 RS '21- & RR '22-, it not only reduces weight but also gives the bike a sportier, sleeker look. With a classy, black, powder-coated finish, it is made from sturdy, aircraft-grade aluminium and will retain its good looks for many years.
Our Branded Radiator Guards have been specially designed with bike enthusiasts in mind, each kit containing a unique design made to compliment your bike. These exciting new Branded Radiator Guards are more than just visually outstanding, their stainless steel construction allows the guard to be incredibly strong and impervious to rust. Each laser-cut guard is crafted with a specific bike series in mind, boasting a distinctive design, while still allowing maximum airflow to the radiator so that cooling isn't compromised. The guard attaches easily and quickly to the radiator, by utilising the existing mounting bolts. Made in the UK.No modifications need to be made to the bike to install.
This pair of R&G Headlight Shields are specially designed to fit Honda NC750X '21- models. R&G Headlight shields are engineered for protection and style. Protecting your expensive headlights from debris kicked up from the road, our headlight shields are easy to fit, with no modification needed to your bike and they are easily removed for cleaning. R&G Headlight Shields are made from clear acrylic and specially designed to fit a range of bikes that's ever growing.
This Engine Case Slider for the left-hand side of the KTM 1290 Super Duke R '20- model. This product fits neatly and easily to the existing engine case and will provide additional protection in the event of a drop. Fits the left-hand side only (right-hand side engine case slider also available (ECS0034CG) R&G engine case sliders compliment the R&G crash protectors and the additional range of products that we offer for these bikes.
Our all-new version R&G Brake Lever Guard kit can be fitted to the brake side and has been specifically designed for the BMW S1000RR '19-'22 models.Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, MotoAmerica) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake engagement.
The all-new R&G Second Skin Dashboard Protection kit is made from high quality, anti-scratch material. This bespoke screen protector kit has been designed to protect the delicate dashboard screen on your bike from unwanted scratches and marks. Kit includes detailed instructions to aid in the dashboard protector placement, 2x dashboard protectors (1x spare), mini spray bottle, suede polishing cloth, wet & dry wipe, squeegee and dust removal strip.
The R&G Stainless Steel Radiator Guard series is a more rugged version of our existing aluminium offering and are aimed particularly at Adventure and Touring bikes. Constructed from stainless steel allowing the guard to be incredibly strong and impervious to rust – perfect for bikes and riders who may tackle demanding terrains and conditions. The laser-cut grills are designed for maximum airflow to the radiator so that cooling isn't compromised; the Radiator Guard is as good looking as it is purposeful. The CNC finished guard attaches easily and quickly to the front of the radiator, either by utilizing the existing mounting bolts or cable tied on. No modifications need to be made to the bike to install.This R&G Stainless Steel Radiator Guard protects the KTM 1290 Super Duke R ’20-
The R&G Stainless Steel Radiator Guard series is a more rugged version of our existing aluminium offering and are aimed particularly at Adventure and Touring bikes. Constructed from stainless steel allowing the guard to be incredibly strong and impervious to rust – perfect for bikes and riders who may tackle demanding terrains and conditions. The laser-cut grills are designed for maximum airflow to the radiator so that cooling isn't compromised; the Radiator Guard is as good looking as it is purposeful. The CNC finished guard attaches easily and quickly to the front of the radiator, either by utilizing the existing mounting bolts or cable tied on. No modifications need to be made to the bike to install.This R&G Stainless Steel Radiator Guard protects the Triumph Scrambler 1200 XC/XE '19- models.
R&G tail tidy unit is easy to fit and will radically transform the rear end of the bike, removing the expansive (and often ugly!) OEM licence plate holders - replacing them with a much sleeker looking unit.
Suitable for the Honda CBR1000RR-R (SP) '20-Our industry-leading race series engine case covers are now available in kit form containing all the engine case covers R&G offer for your bike in one go. Developed on track and brought to the road, R&G Engine Case Covers bring BSB and AMA race series approved levels of engine cover protection to your bike for complete peace of mind.Made in the U.K.
R&G Radiator Guards are made from aluminium, improve looks and protect your expensive and vulnerable radiator from flying debris.This radiator guard is suitable for KTM 1290 Super Duke R ’20- & Super Duke RR '21- model.
This 4pcs Boot Guard kit has been specially designed for the Honda CBR1000RR-R Fireblade/SP '20-R&G Boot Guard kits are available for a large range of bike styles and brands, with new applications released regularly. The unique R&G texture was specifically designed to be durable, providing the rider with a buffer between his boot on the exposed areas of the swingarm which can (on occasion) come into contact with each other during cornering causing wear and unwanted damage to the swingarm or boots (both expensive to fix!).Made in the UK.
Our all-new Stainless Steel Bar Endshave been specially developed and shaped for your bike.The stainless steel finish with lasered R&G logo gives you the ultimate corrosion protection, whilst looking great and helping to protect those expensive levers and clip-ons from damage in the event of a drop or crash.Designed for theR&G Stainless Steel Bar Ends for Kawasaki Versys 1000 '12-'18, Z1000, ZZR1400, GTR1400, Ninja 125 '19-, Ninja 1000SX '20- , Royal Enfield Himalayan '17- & Kawasaki KLR 650 '22- Models.
Designed for the Triumph Daytona Moto2™ 765 2020- models, these Bar End Sliders will protect your expensive levers and clip-on from damage in the event of a drop, crash or slide.R&G Bar End Sliders are easy to install and feature a simple but stylish design.
This frame plug is suitable for the right-hand side of the Yamaha Tenere 700 '19-'21. Held in place thanks to its expanding design this product covers exposed holes in the frame protecting the frame from damage and debris buildup.For the left-hand Frame Plug, please see related products or search FI0163BK
Once you have removed the pillion footrests, fill the void left behind and cover those otherwise exposed holes in the sub-frame with the R&G blanking plate. This Footrest Blanking Plate have been designed to cover and protect the left hand side of your Kawasaki Ninja 1000SX ’20-.R&G Footrest Blanking Plate is easy to install, simply screwing in place of the rear pillion peg, covering those otherwise exposed sub-frame holes, that if left uncovered could result in corrosion from dirt, water and debris buildup.
Dropping your cherished bike can be an expensive exercise. R&G Adventure Bars offer the rider peace of mind. R&G Adventure Bars provide essential crash protection for your motorcycle. This Adventure Bar Kit is designed specifically for the Honda CRF1100L Africa Twin Standard Model (NON-DCT) (UPPER) ’20-.R&G – innovation not imitation!
Available in Black ONLY finish to fit the Ducati Hypermotard 950 '19- & Ducati Hypermotard 950 SP/RVE '21-Made from pressed aluminium and feature a neat, seamless frame (where applicable) like our Radiator Guards. They improve the looks of your bike and help to protect your expensive and vulnerable engine components from flying debris.Specially designed to fit onto the Front Cylinder Head Guard for Ducati Hypermotard 950 '19- & Ducati Hypermotard 950 SP/RVE '21- models. **Radiator Guard NOT included!**No permanent modifications need to be made to the bike.
This Rear Tyre Hugger is suitable for the Yamaha MT-09 '17-'20 & MT-09 SP '18-'20Designed using the latest 3D scanning technologies for an exact fit and easy installation.Made in the U.K.
R&G Second Skin stone chip protection film is a non-yellowing (UV Stable), ultra-tough, easy-to-apply, polyurethane protective film. Designed to protect your road or track motorcycle from stone chips, road salt, tar, abrasions, fairing stress fractures and bodywork/fuel tank scratches from general use. The unique properties of our protection film enable it to disperse the impact energy of gravel and small stones, bouncing them off and leaving your bodywork untouched beneath.
